RCS keywords cause problems for git-p4 as perforce always
expands them (if +k is set) and so when applying the patch,
git reports that the files have been modified by both sides,
when in fact they haven't.
This change means that when git-p4 detects a problem applying
a patch, it will check to see if keyword expansion could be
the culprit. If it is, it strips the keywords in the p4
repository so that they match what git is expecting. It then
has another go at applying the patch.
This behaviour is enabled with a new git-p4 configuration
option and is off by default.
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before searching by some field the information we search for must be
filled in, but we do not have to fill other fields that are not
involved in the search.
To be able to request filling only specified fields,
fill_project_list_info() was enhanced in previous commit to take
additional parameters which specify part of projects info to fill.
This way we can limit doing expensive calculations (like running
git-for-each-ref to get 'age' / "Last changed" info) to doing those
only for projects which we will show as search results.
This commit actually uses this interface, changing gitweb code from
the following behavior
fill all project info on all projects
search projects
to behaving like this pseudocode
fill search fields on all projects
search projects
fill all project info on search results
With this commit the number of git commands used to generate search
results is 2*<matched projects> + 1, and depends on number of matched
projects rather than number of all projects (all repositories).
Note: this is 'git for-each-ref' to find last activity, and 'git config'
for each project, and 'git --version' once.
Example performance improvements, for search that selects 2
repositories out of 12 in total:
* Before (warm cache):
"This page took 0.867151 seconds and 27 git commands to generate."
* After (warm cache):
"This page took 0.673643 seconds and 5 git commands to generate."
Now imagine that they are 5 repositories out of 5000, and cold or
trashed cache case.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance fill_project_list_info() subroutine to accept optional
parameters that specify which fields in project information needs to
be filled. If none are specified then fill_project_list_info()
behaves as it used to, and ensure that all project info is filled.
This is in preparation of future lazy filling of project info in
project search and pagination of sorted list of projects.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the check if given keys (given parts) of project info needs to
be filled into project_info_needs_filling() subroutine. It is for now
a thin wrapper around "!exists $project_info->{$key}".
Note that !defined was replaced by more correct !exists.
While at it uniquify treating of all project info, adding checks for
'age' field before running git_get_last_activity(), and also checking
for all keys filled in code protected by conditional, and not only
one.
The code now looks like this
foreach my $project (@$project_list) {
if (given keys need to be filled) {
fill given keys
}
...
}
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The heuristic used by "git merge" to decide if it automatically gives an
editor upon clean automerge is to see if the standard input and the
standard output is the same device and is a tty, we are in an interactive
session. "The same device" test was done by comparing fstat(2) result on
the two file descriptors (and they must match), and we asked isatty() only
for the standard input (we insist that they are the same device and there
is no point asking tty-ness of the standard output).
The stat(2) emulation in the Windows port however does not give a usable
value in the st_ino field, so even if the standard output is connected to
something different from the standard input, "The same device" test may
incorrectly return true. To accomodate it, add another isatty() check for
the standard output stream as well.
Reported-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was indeed not obvious for new contributors to find this document in
the source tree, since there were no reference to it outside the
Documentation/ directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was part of the "branch description" feature in the larger
"help people communicate better during their pull based workflow"
topic, but was never documented.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git spawns a remote helper program (like git-remote-http),
the last thing we do before closing the pipe to the child
process is to send a blank line, telling the helper that we
are done issuing commands. However, the helper may already
have exited, in which case the parent git process will
receive SIGPIPE and die.
In particular, this can happen with the remote-curl helper
when it encounters errors during a push. The helper reports
individual errors for each ref back to git-push, and then
exits with a non-zero exit code. Depending on the exact
timing of the write, the parent process may or may not
receive SIGPIPE.
This causes intermittent test failure in t5541.8, and is a
side effect of 5238cbf (remote-curl: Fix push status report
when all branches fail). Before that commit, remote-curl
would not send the final blank line to indicate that the
list of status lines was complete; it would just exit,
closing the pipe. The parent git-push would notice the
closed pipe while reading the status report and exit
immediately itself, propagating the failing exit code. But
post-5238cbf, remote-curl completes the status list before
exiting, git-push actually runs to completion, and then it
tries to cleanly disconnect the helper, leading to the
SIGPIPE race above.
This patch drops all error-checking when sending the final
"we are about to hang up" blank line to helpers. There is
nothing useful for the parent process to do about errors at
that point anyway, and certainly failing to send our "we are
done with commands" line to a helper that has already exited
is not a problem.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first part of the bundle header contains the boundary commits, and
could be approximated by
# v2 git bundle
$(git rev-list --pretty=oneline --boundary <ARGS> | grep ^-)
git-bundle actually spawns exactly this rev-list invocation, and does
the grepping internally.
There was a subtle bug in the latter step: it used fgets() with a
1024-byte buffer. If the user has sufficiently long subjects (e.g.,
by not adhering to the git oneline-subject convention in the first
place), the 'oneline' format can easily overflow the buffer. fgets()
then returns the rest of the line in the next call(s). If one of
these remaining parts started with '-', git-bundle would mistakenly
insert it into the bundle thinking it was a boundary commit.
Fix it by using strbuf_getwholeline() instead, which handles arbitrary
line lengths correctly.
Note that on the receiving side in parse_bundle_header() we were
already using strbuf_getwholeline_fd(), so that part is safe.
Reported-by: Jannis Pohlmann <jannis.pohlmann@codethink.co.uk>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When falling back to 3-way merge, we run "git apply" to synthesize the
fake ancestor tree by parsing the incoming patch, and another "git apply"
to apply the patch to the fake ancestor tree. Both invocation need to
be aware of the custom -p<num> setting to parse patches that were prepared
with non-standard src/dst prefix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment even said that it should eventually go there. While at
it, match the calling convention and name of the function to the
strbuf_get*line family. So it now is strbuf_getwholeline_fd.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing groups of refs to a remote, there is no simple way to remove
old refs that still exist at the remote that is no longer updated from us.
This will allow us to remove such refs from the remote.
With this change, running this command
$ git push --prune remote refs/heads/*:refs/remotes/laptop/*
removes refs/remotes/laptop/foo from the remote if we do not have branch
"foo" locally anymore.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Will be useful in next patches. No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function match_name_with_pattern() is called twice, once to see if a
pattern matches with the name, and again to learn what the matched pattern
maps the name to. Since check_pattern_match() is only used in one place,
we can just reorganize it to make a single call and fetch the values at
the same time.
This changes the meaning of check_pattern_match() that used to check which
pattern in the array of refspecs matched the given ref, to return the name
of the remote ref the given ref is mapped to.
Rename it to get_ref_match() which actually describes more closely what
it's actually doing now.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we can reuse src later on. No functional changes.
Will be useful in next patches.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --ff-only option was not described next to --ff and --no-ff options in
"git merge" documentation, even though these three are logically together,
describing how to choose one of three possibilities.
Also the description for '--ff' and '--no-ff' discussed what '--ff' means,
and mentioned '--no-ff' as if it were a side-note to '--ff'.
Make them into three top-level entries and list them together. This way,
it would be more clear that the user can choose one from these three.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The style used for incrementing and decrementing variables was fairly
inconsistenty and was normalized to use x++, or ((x++)) in contexts
where the former would otherwise be interpreted as a command. This is a
bash-ism, but for obvious reasons this script is already bash-specific.
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete <name> only for set-url. For set-branches and
set-head, complete <name> and <branch> over the network,
like e.g. git pull already does.
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CodingGuidlines confidently declares "We use tabs for indentation."
It would be a shame if it were caught lying.
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was out-of-sync with the reality of who works on this
script. Defer (silently) to Documentation/SubmittingPatches
like all other code.
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was broken since the feature was introduced initially at abcaf07 (If
the user has configured various parameters, use them., 2008-08-10).
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick fails it offers a helpful hint about how to
proceed. The hint tells the user how to do the cleanup
needed by the conflicted cherry-pick and finish the job after
conflict resolution. In case of cherry-pick --no-commit, the
hint goes too far. It tells the user to finish up with
'git commit'. That is not what this git-cherry-pick was
trying to do in the first place.
Restrict the hint in case of --no-commit to avoid giving this
extra advice.
Also, add a test verifying the reduced hint for the --no-commit
version of cherry-pick.
Signed-off-by: Phil Hord <hordp@cisco.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://bogomips.org/git-svn:
git-svn.perl: fix a false-positive in the "already exists" test
git-svn.perl: perform deletions before anything else
git-svn: Fix time zone in --localtime
git-svn: un-break "git svn rebase" when log.abbrevCommit=true
git-svn: remove redundant porcelain option to rev-list
completion: add --interactive option to git svn dcommit
* jk/diff-highlight:
diff-highlight: document some non-optimal cases
diff-highlight: match multi-line hunks
diff-highlight: refactor to prepare for multi-line hunks
diff-highlight: don't highlight whole lines
diff-highlight: make perl strict and warnings fatal
* jk/grep-binary-attribute:
grep: pre-load userdiff drivers when threaded
grep: load file data after checking binary-ness
grep: respect diff attributes for binary-ness
grep: cache userdiff_driver in grep_source
grep: drop grep_buffer's "name" parameter
convert git-grep to use grep_source interface
grep: refactor the concept of "grep source" into an object
grep: move sha1-reading mutex into low-level code
grep: make locking flag global
* nd/find-pack-entry-recent-cache-invalidation:
find_pack_entry(): do not keep packed_git pointer locally
sha1_file.c: move the core logic of find_pack_entry() into fill_pack_entry()
* fc/zsh-completion:
completion: simplify __gitcomp and __gitcomp_nl implementations
completion: use ls -1 instead of rolling a loop to do that ourselves
completion: work around zsh option propagation bug
open_or_add_dir checks to see if the directory already exists or not.
If it already exists and is not a directory, then we fail. However,
open_or_add_dir did not previously account for the possibility that the
path did exist as a file, but is deleted in the current commit.
In order to prevent this legitimate case from failing, open_or_add_dir
needs to know what files are deleted in the current commit.
Unfortunately that information has to be plumbed through a couple of
layers.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
If we delete a file and recreate it as a directory in a single commit,
we have to tell the server about the deletion first or else we'll get
"RA layer request failed: Server sent unexpected return value (405
Method Not Allowed) in response to MKCOL request"
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Use numerical form of time zone to replace alphabetic time zone
abbreviation generated by "%Z". "%Z" is not portable and contain
ambiguity for many areas. For example, CST could be "Central
Standard Time" (GMT-0600) and "China Standard Time" (GMT+0800).
Alphabetic time zone abbreviation is meant for human readability,
not for specifying a time zone for machines.
Failed case can be illustrated like this in linux shell:
> echo $TZ
Asia/Taipei
> date +%Z
CST
> env TZ=`date +%Z` date
Mon Dec 19 06:03:04 CST 2011
> date
Mon Dec 19 14:03:04 CST 2011
[ew: fixed bad package reference inside Git::SVN::Log]
Signed-off-by: Wei-Yin Chen (陳威尹) <chen.weiyin@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Change git-svn to use git-rev-list(1) instead of git-log(1) since the
latter is porcelain that'll cause "git svn rebase" to fail completely
if log.abbrevCommit is set to true in the configuration.
Without this patch the code will fail to parse a SHA1, and then just
spew a bunch of "Use of uninitialized value $hash in string eq"
warnings at "if ($c && $c eq $hash) { ..." and never do anything
useful.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Change an invocation of git-rev-list(1) to not use --no-color,
git-rev-list(1) will always ignore that option and the --color option,
so there's no need to pass it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
