* mv/maint-branch-m-symref:
update-ref --no-deref -d: handle the case when the pointed ref is packed
git branch -m: forbid renaming of a symref
Fix git update-ref --no-deref -d.
rename_ref(): handle the case when the reflog of a ref does not exist
Fix git branch -m for symrefs.
* maint:
Start 1.6.0.4 cycle
add instructions on how to send patches to the mailing list with Gmail
Documentation/gitattributes: Add subsection header for each attribute
git send-email: avoid leaking directory file descriptors.
send-pack: do not send out single-level refs such as refs/stash
fix overlapping memcpy in normalize_absolute_path
pack-objects: avoid reading uninitalized data
correct cache_entry allocation
Conflicts:
RelNotes
Since no version of receive-pack accepts these "funny refs", we should
mirror the check when considering the list of refs to send. IOW, don't
even make them eligible for matching or mirroring.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This had two problems with symrefs. First, it copied the actual sha1
instead of the "pointer", second it failed to remove the old ref after a
successful rename.
Given that till now delete_ref() always dereferenced symrefs, a new
parameters has been introduced to delete_ref() to allow deleting refs
without a dereference.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/alternate-push:
push: receiver end advertises refs from alternate repositories
push: prepare sender to receive extended ref information from the receiver
receive-pack: make it a builtin
is_directory(): a generic helper function
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" enhancement allows the receiving end to report not only its own
refs but refs in repositories it borrows from via the alternate object
store mechanism. By telling the sender that objects reachable from these
extra refs are already complete in the receiving end, the number of
objects that need to be transfered can be cut down.
These entries are sent over the wire with string ".have", instead of the
actual names of the refs. This string was chosen so that they are ignored
by older programs at the sending end. If we sent some random but valid
looking refnames for these entries, "matching refs" rule (triggered when
running "git push" without explicit refspecs, where the sender learns what
refs the receiver has, and updates only the ones with the names of the
refs the sender also has) and "delete missing" rule (triggered when "git
push --mirror" is used, where the sender tells the receiver to delete the
refs it itself does not have) would try to update/delete them, which is
not what we want.
This prepares the send-pack (and "push" that runs native protocol) to
accept extended existing ref information and make use of it. The ".have"
entries are excluded from ref matching rules, and are exempt from deletion
rule while pushing with --mirror option, but are still used for pack
generation purposes by providing more "bottom" range commits.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git attempts to delete a ref, but the unlink of the ref
file fails, we print a message to stderr. This is usually a
good thing, but if the error is ENOENT, then it indicates
that the ref has _already_ been deleted. And since that's
our goal, it doesn't make sense to complain to the user.
This harmonizes the error reporting behavior for the
unpacked and packed cases; the packed case already printed
nothing on ENOENT, but the unpacked printed unconditionally.
Additionally, send-pack would, when deleting the tracking
ref corresponding to a remote delete, print "Failed to
delete" on any failure. This can be a misleading
message, since we actually _did_ delete at the remote side,
but we failed to delete locally. Rather than make the
message more precise, let's just eliminate it entirely; the
delete_ref routine already takes care of printing out a much
more specific message about what went wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch provides a way to specify "push matching heads" using a
special refspec ":". This is useful because it allows "push = +:"
as a way to specify that matching refs will be pushed but, in addition,
forced updates will be allowed, which was not possible before.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tightened the refspec validation code in an earlier commit ef00d15
(Tighten refspec processing, 2008-03-17) per my suggestion, but the
suggestion was misguided to begin with and it broke this usage:
$ git push origin HEAD~12:master
The syntax of push refspecs and fetch refspecs are similar in that they
are both colon separated LHS and RHS (possibly prefixed with a + to
force), but the similarity ends there. For example, LHS in a push refspec
can be anything that evaluates to a valid object name at runtime (except
when colon and RHS is missing, or it is a glob), while it must be a
valid-looking refname in a fetch refspec. To validate them correctly, the
caller needs to be able to say which kind of refspecs they are. It is
unreasonable to keep a single interface that cannot tell which kind it is
dealing with, and ask it to behave sensibly.
This commit separates the parsing of the two into different functions, and
clarifies the code to implement the parsing proper (i.e. splitting into
two parts, making sure both sides are wildcard or neither side is).
This happens to also allow pushing a commit named with the esoteric "look
for that string" syntax:
$ git push ../test.git ':/remote.c: Fix overtight refspec:master'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now find_unique_abbrev() never returns NULL, there is no need for callers
to prepare for seeing NULL and fall back to giving the full 40-hexdigits.
While we are at it, drop "..." in the "git reset" output that reports the
location of the new HEAD, between the abbreviated commit object name and
the one line commit summary. Because we are always showing the HEAD
(which cannot be missing!), we never had a case where we show the full 40
hexdigits that is not followed by three dots, and these three dots were
stealing 3 columns from the precious horizontal screen real estate out of
80 that can better be used for the one line commit summary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of start_command() can set the members .in and .out of struct
child_process to a value > 0 to specify that this descriptor is used as
the stdin or stdout of the child process.
Previously, if start_command() was successful, this descriptor was closed
upon return. Here we now make sure that the descriptor is also closed in
case of failures. All callers are updated not to close the file descriptor
themselves after start_command() was called.
Note that earlier run_gpg_verify() of git-verify-tag set .out = 1, which
worked because start_command() treated this as a special case, but now
this is incorrect because it closes the descriptor. The intent here is to
inherit stdout to the child, which is achieved by .out = 0.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By setting .in, .out, or .err members of struct child_process to -1, the
callers of start_command() can request that a pipe is allocated that talks
to the child process and one end is returned by replacing -1 with the
file descriptor.
Previously, a flag was set (for .in and .out, but not .err) to signal
finish_command() to close the pipe end that start_command() had handed out,
so it was optional for callers to close the pipe, and many already do so.
Now we make it mandatory to close the pipe.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This updates send-pack and fast-import to use symbolic constants
for checking the return values from check_ref_format(), and also
futureproof the logic in lock_any_ref_for_update() to explicitly
name the case that is usually considered an error but is Ok for
this particular use.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of intermingling success and failure, we now print:
1. all uptodate refs (if args.verbose is enabled)
2. successfully pushed refs
3. failed refs
with the assumption that the user is most likely to see the
ones at the end, and therefore we order them from "least
interesting" to "most interesting."
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has always been slightly inaccurate, since it used the
new_refs counter, which really meant "did we send any
objects," so deletions were not counted.
It has gotten even worse with recent patches, since we no
longer look at the 'ret' value, meaning we would say "up to
date" if non-ff pushes were rejected.
Instead, we now claim up to date iff every ref is either
unmatched or up to date. Any other case should already have
generated a status line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we set all ref pushes to 'OK', and then marked
them as errors if the remote reported so. This has the
problem that if the remote dies or fails to report a ref, we
just assume it was OK.
Instead, we use a new non-OK state to indicate that we are
expecting status (if the remote doesn't support the
report-status feature, we fall back on the old behavior).
Thus we can flag refs for which we expected a status, but
got none (conversely, we now also print a warning for refs
for which we get a status, but weren't expecting one).
This also allows us to simplify the receive_status exit
code, since each ref is individually marked with failure
until we get a success response. We can just print the usual
status table, so the user still gets a sense of what we were
trying to do when the failure happened.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets us show remote errors (e.g., a denied hook) along
with the usual push output.
There is a slightly clever optimization in receive_status
that bears explanation. We need to correlate the returned
status and our ref objects, which naively could be an O(m*n)
operation. However, since the current implementation of
receive-pack returns the errors to us in the same order that
we sent them, we optimistically look for the next ref to be
looked up to come after the last one we have found. So it
should be an O(m+n) merge if the receive-pack behavior
holds, but we fall back to a correct but slower behavior if
it should change.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we manually checked the 'NONE' and 'UPTODATE'
conditions. Now that we have ref->status, we can easily
say "only update if we pushed successfully".
This adds a test for and fixes a regression introduced in
ed31df31 where deleted refs did not have their tracking
branches removed. This was due to a bogus per-ref error test
that is superseded by the more accurate ref->status flag.
Signed-off-by: Jeff King <peff@peff.net>
Completely-Acked-By: Alex "Sleepy" Riesen <raa.lkml@gmail.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of keeping the 'ret' variable, we instead have a
status flag for each ref that tracks what happened to it.
We then print the ref status after all of the refs have
been examined.
This paves the way for three improvements:
- updating tracking refs only for non-error refs
- incorporating remote rejection into the printed status
- printing errors in a different order than we processed
(e.g., consolidating non-ff errors near the end with
a special message)
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/send-pack-remote-track:
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
* db/remote-builtin:
Reteach builtin-ls-remote to understand remotes
Build in ls-remote
Use built-in send-pack.
Build-in send-pack, with an API for other programs to call.
Build-in peek-remote, using transport infrastructure.
Miscellaneous const changes and utilities
Conflicts:
transport.c
Existing "git push --all" is almost perfect for backing up to
another repository, except that "--all" only means "all
branches" in modern git, and it does not delete old branches and
tags that exist at the back-up repository that you have removed
from your local repository.
This teaches "git-send-pack" a new "--mirror" option. The
difference from the "--all" option are that (1) it sends all
refs, not just branches, and (2) it deletes old refs you no
longer have on the local side from the remote side.
Original patch by Junio C Hamano.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing to overwrite a ref that points at a commit we do
not even have, the recent "terse push" patch tried to get a
unique abbreviation for the non-existent (from our point of
view) object, which resulted in strcpy(buf, NULL) and
segfaulted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is really an uninteresting detail, and it just takes
attention away from the actual push updates and posssible
errors.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the output of send-pack to match the new,
more terse fetch output. It looks like this:
To git://host.tld/path/to/repo
+ f3325dc...3b91d1c hasforce -> mirror/hasforce (forced update)
f3325dc..bb022dc master -> mirror/master
! [rejected] needsforce -> mirror/needsforce (non-fast forward)
* [new branch] newbranch -> mirror/newbranch
* [new tag] v1.0 -> v1.0
instead of:
updating 'refs/heads/mirror/hasforce' using 'refs/heads/hasforce'
from f3325dca9c4a34d74012c0e159254f454930cec7
to 3b91d1c310ca9d7b547b85466dd876e143498304
updating 'refs/heads/mirror/master' using 'refs/heads/master'
from f3325dca9c4a34d74012c0e159254f454930cec7
to bb022dc363d5c2aa9aa3026beb9706d44fbe1328
error: remote 'refs/heads/mirror/needsforce' is not an ancestor of
local 'refs/heads/needsforce'.
Maybe you are not up-to-date and need to pull first?
updating 'refs/heads/mirror/newbranch' using 'refs/heads/newbranch'
from 0000000000000000000000000000000000000000
to 3b91d1c310ca9d7b547b85466dd876e143498304
updating 'refs/tags/v1.0'
from 0000000000000000000000000000000000000000
to bb022dc363d5c2aa9aa3026beb9706d44fbe1328
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also marks some more things as const, as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>