POSIX allows echo without flag to interpret specials such as \n, and we
tried to make things portable by using printf instead where it matters.
Recently added code to "git am" had unprotected "echo", which was caught
by t4014 and Rémi Vanicat.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the assignment to FIRSTLINE down so that we do not have
to have multiple copies.
Suggested by Linus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally git-rebase was implemented in terms of "format-patch" piped
to "am -3", to strike balance between speed (because it avoids a rather
expensive read-tree/merge-recursive machinery most of the time) and
flexibility (the magic "-3" allows it to fall back to 3-way merge as
necessary). However, this combination has one flaw when dealing with a
nonstandard commit log message format that has more than one lines in the
first paragraph.
This teaches "git am --rebasing" to take advantage of the fact that the
mbox message "git rebase" prepares for it records the original commit
object name, to get the log message from the original commit object
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.5.4:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
When the Subject: line is empty for whatever reason, git-am was fooled by
it and left an empty line at the beginning of the resulting commit log
message.
This moves the logic around so that we do not keep $SUBJECT in a separate
variable. Instead, $dotest/msg-clean, which used to be the log message
body extracted from the message and then trailing whitespaces cleansed
out, now contains the subject line followed by a blank line at the
beginning for normal messages, and we use the first line from the file as
the summary line throughout the program.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-n" syntax is not supported by System V versions of
tail (which prefer "tail -1"). Unfortunately "tail -1" is
not actually POSIX. We had some of both forms in our
scripts.
Since neither form works everywhere, this patch replaces
both with the equivalent sed invocation:
sed -ne '$p'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option --rebasing is used internally for rebase to tell am that
it is being used for its purpose. This would leave .dotest/rebasing to
help "completion" scripts tell if the ongoing operation is am or rebase.
Also the option at the same time stands for --binary, -3 and -k which
are always given when rebase drives am as its backend.
Using the information "am" leaves, git-completion.bash tells ongoing
rebase and am apart.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been supported for a long time, but I do not think this feature has
been in use in the real world at all. We would eventually move this out
of the toplevel of the work tree and to somewhere under $GIT_DIR, so let's
remove the command line option to specify the location now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit c149184 (allow git-am to run in a subdirectory) taught
git-am to start from a subdirectory by going up to the root of the work
tree byitself, but it did not adjust the path to read the mbox from when
it did so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We just move to the top of the tree and proceed. This
shouldn't break any existing callers, since the behavior was
previously disallowed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "too many unreachable loose objects" git gc --auto will always
trigger. This clutters the output of git am and thus git rebase.
Signed-off-by: Michael Stefaniuc <mstefani@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-am -i: report rewritten title
git grep shows the same hit repeatedly for unmerged paths
Do check_repository_format() early (re-fix)
Do check_repository_format() early
Add missing inside_work_tree setting in setup_git_directory_gently
Jeff Garzik noticed that "git am -i" reports the applied patch with
the title before the user edited it. This was confusing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 6e9e0327b7. People
can prepare a text file with Subject: and From: headers and feed it to
"am" (pretending the file is a piece of e-mail), and have actually been
doing so. Strict checking for Date: breaks this established workflow,
which wants to record the time of the commit as the author time.
Thanks go to Jens Axboe for injection of sanity.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though commit-tree would default to the current time if the incoming
e-mail message somehow did not record the timestamp, it is safer to catch
the breakage sooner.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have a file called HEAD in your work tree, many commands that
our scripts feed "HEAD" to would complain about the rev vs path
ambiguity. A solution is to form command line more carefully by
appending -- to them, which makes it clear that we mean HEAD rev not
HEAD file.
This patch would apply to maint.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$ git am -3 -s -i file
spewed the usage strings back at the user while
$ git am -3 -i -s file
didn't. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was lost in the migration to git-rev-parse --parseopt by commit
78443d9049.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/autogc:
git-gc --auto: run "repack -A -d -l" as necessary.
git-gc --auto: restructure the way "repack" command line is built.
git-gc --auto: protect ourselves from accumulated cruft
git-gc --auto: add documentation.
git-gc --auto: move threshold check to need_to_gc() function.
repack -A -d: use --keep-unreachable when repacking
pack-objects --keep-unreachable
Export matches_pack_name() and fix its return value
Invoke "git gc --auto" from commit, merge, am and rebase.
Implement git gc --auto
We used to say "Applying <patch subject>", "Wrote <tree
object>", and "Committed <commit object>". Worse yet, with
extra blank lines around them.
Make the output more concise. The object names are not so
useful nor interesting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am used "git apply -z --index-info" to find the original versions
of the files touched by the diff, to be able to do an inexpensive
three-way merge.
This operation makes only sense in a repository, since the index
information in the diff refers to blobs, which have to be present in
the current repository.
Therefore, teach "git apply" a mode to write out the result as an
index file to begin with, obviating the need for scripts to do it
themselves.
The sole user for --index-info is "git am" is converted to
use --build-fake-ancestor in this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of shell scripts contained stuff starting with
while case "$#" in 0) break ;; esac
and similar. I consider breaking out of the condition instead of the
body od the loop ugly, and the implied "true" value of the
non-matching case is not really obvious to humans at first glance. It
happens not to be obvious to some BSD shells, either, but that's
because they are not POSIX-compliant. In most cases, this has been
replaced by a straight condition using "test". "case" has the
advantage of being faster than "test" on vintage shells where "test"
is not a builtin. Since none of them is likely to run the git
scripts, anyway, the added readability should be worth the change.
A few loops have had their termination condition expressed
differently.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am used "git apply -z --index-info" to find the original versions
of the files touched by the diff, to be able to do an inexpensive
three-way merge.
This operation makes only sense in a repository, since the index
information in the diff refers to blobs, which have to be present in
the current repository.
Therefore, teach "git apply" a mode to write out the result as an
index file to begin with, obviating the need for scripts to do it
themselves.
The sole user for --index-info is "git am" is converted to
use --build-fake-ancestor in this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of auto gc is to pack new objects created in loose
format, so a good rule of thumb is where we do update-ref after
creating a new commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage information in git-am.sh now matches that of the
documentation.
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am expects the variable $resume to be empty or unset, which might not
be the case if $resume is set in the user's environment. So initialize
it to an empty value on startup.
The problem was noticed by Pierre Habouzit and reported through
http://bugs.debian.org/435807
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test if the From: line contains "Mail System Internal Data" and if
it is, skip this mail.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, "git rerere" was enabled by creating the directory
.git/rr-cache. That is definitely not in line with most other
features, which are enabled by a config variable.
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
[jc: with minimum tweaks]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under some implementations of echo (such as that provided by
dash), backslash escapes are recognized without any other
options. This means that echo-ing user-supplied strings may
cause any backslash sequences in them to be converted. Using
printf resolves the ambiguity.
This bug can be seen when using git-am to apply a patch
whose subject contains the character sequence "\n"; the
characters are converted to a literal newline. Noticed by
Szekeres Istvan.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This simplifies the shell code, reduces its memory footprint, and
speeds things up. The performance improvements should be noticable
when git-rebase works on big commits.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I am working on a project that required parsing through regular
mboxes that didn't necessarily have patches embedded in them. I
started by creating my own modified copy of git-am and working
from there. Very quickly, I noticed git-mailinfo wasn't able to
handle a big chunk of my email.
After hacking up numerous solutions and running into more
limitations, I decided it was just easier to rewrite a big chunk
of it. The following patch has a bunch of fixes and features
that I needed in order for me do what I wanted.
Note: I'm didn't follow any email rfc papers but I don't think
any of the changes I did required much knowledge (besides the
boundary stuff).
List of major changes/fixes:
- can't create empty patch files fix
- empty patch files don't fail, this failure will come inside git-am
- multipart boundaries are now handled
- only output inbody headers if a patch exists otherwise assume those
headers are part of the reply and instead output the original headers
- decode and filter base64 patches correctly
- various other accidental fixes
I believe I didn't break any existing functionality or
compatibility (other than what I describe above, which is really
only the empty patch file).
I tested this through various mailing list archives and
everything seemed to parse correctly (a couple thousand emails).
[jc: squashed in another patch from Don's five patch series to
fix the test case, as this patch exposes the bug in the test.]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the blobs recorded on the index lines in the patch as pre-image
blobs are not found in the repository, "git-am" punted saying
that the index line does not record anything useful. This was not
clear enough -- the index line does have something useful but the
problem was that it was not useful in _that_ repository.
Reword the message as Francis Moreau suggests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is originally from Andy Parkins whose patch used --patchdepth; let's
use -p which is more in line with the underlying git-apply.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -C[NUM] to git-am and git-rebase so that patches can be applied even
if context has changed a bit.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/bare:
Disallow working directory commands in a bare repository.
git-fetch: allow updating the current branch in a bare repository.
Introduce is_bare_repository() and core.bare configuration variable
Move initialization of log_all_ref_updates
