In the next major release, we will switch "git push [$there]" that
does not say what to push from the traditional "matching" to the
updated "simple" semantics, that pushes the current branch to the
branch with the same name only when the current branch is set to
integrate with that remote branch (all other cases will error out).
* mm/push-default-switch-warning:
push: start warning upcoming default change for push.default
In preparation for flipping the default to the "simple" mode from
the "matching" mode that is the historical default, start warning
users when they rely on unconfigured "git push" to default to the
"matching" mode.
Also, advertise for 'simple' where 'current' and 'upstream' are advised.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" over smart-http lost progress output and this resurrects it.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
Previously, we tested only that "push --quiet --no-progress"
was silent. However, there are many other combinations that
were not tested:
1. no options at all (but stderr as a tty)
2. --no-progress by itself
3. --quiet by itself
4. --progress (when stderr not a tty)
These are tested elsewhere for general "push", but it is
important to test them separately for http. It follows a
very different code path than git://, and options must be
relayed across a remote helper to a separate send-pack
process (and in fact cases (1), (2), and (4) have all been
broken just for http at some point in the past).
We can drop the "--quiet --no-progress" test, as it is not
really interesting (it is already handled by testing them
separately in (2) and (3) above).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Break down the cases in which "git push" fails due to non-ff into
three categories, and give separate advise messages for each case.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
The http-backend program sets default GIT_COMMITTER_NAME and
GIT_COMMITTER_EMAIL variables based on the REMOTE_USER and
REMOTE_ADDR variables provided by the webserver. However, it
unconditionally overwrites any existing GIT_COMMITTER
variables, which may have been customized by site-specific
code in the webserver (or in a script wrapping http-backend).
Let's leave those variables intact if they already exist,
assuming that any such configuration was intentional. There
is a slight chance of a regression if somebody has set
GIT_COMMITTER_* for the entire webserver, not intending it
to leak through http-backend. We could protect against this
by passing the information in alternate variables. However,
it seems unlikely that anyone will care about that
regression, and there is value in the simplicity of using
the common variable names that are used elsewhere in git.
While we're tweaking the environment-handling in
http-backend, let's switch it to use argv_array to handle
the list of variables. That makes the memory management much
simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the test cannot be run with custom port set to LIB_HTTPD_PORT.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The protocol between transport-helper.c and remote-curl requires
remote-curl to always print a blank line after the push command
has run. If the blank line is ommitted, transport-helper kills its
container process (the git push the user started) with exit(128)
and no message indicating a problem, assuming the helper already
printed reasonable error text to the console.
However if the remote rejects all branches with "ng" commands in the
report-status reply, send-pack terminates with non-zero status, and
in turn remote-curl exited with non-zero status before outputting
the blank line after the helper status printed by send-pack. No
error messages reach the user.
This caused users to see the following from git push over HTTP
when the remote side's update hook rejected the branch:
$ git push http://... master
Counting objects: 4, done.
Delta compression using up to 6 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 301 bytes, done.
Total 3 (delta 0), reused 0 (delta 0)
$
Always print a blank line after the send-pack process terminates,
ensuring the helper status report (if it was output) will be
correctly parsed by the calling transport-helper.c. This ensures
the helper doesn't abort before the status report can be shown to
the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lib-terminal.sh runs a test and thus increases the test count, but the
output is lost so that TAP produces a "no plan found error".
Move the lib-terminal call after the lib-httpd and make TAP happy
(though still leave me clueless).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack advertises its list of refs, it generally hides the
capabilities information after a NUL at the end of the first ref.
However, when we have an empty repository, there are no refs, and
therefore receive-pack writes a fake ref "capabilities^{}" with the
capabilities afterwards.
On the client side, git reads the result with get_remote_heads(). We pick
the capabilities from the end of the line, and then call check_ref() to
make sure the ref name is valid. We see that it isn't, and don't bother
adding it to our list of refs.
However, the call to check_ref() is enabled by passing the REF_NORMAL flag
to get_remote_heads. For the regular git transport, we pass REF_NORMAL in
get_refs_via_connect() if we are doing a push (since only receive-pack
uses this fake ref). But in remote-curl, we never use this flag, and we
accept the fake ref as a real one, passing it back from the helper to the
parent git-push.
Most of the time this bug goes unnoticed, as the fake ref won't match our
refspecs. However, if "--mirror" is used, then we see it as remote cruft
to be pruned, and try to pass along a deletion refspec for it. Of course
this refspec has bogus syntax (because of the ^{}), and the helper
complains, aborting the push.
Let's have remote-curl mirror what the builtin get_refs_via_connect() does
(at least for the case of using git protocol; we can leave the dumb
info/refs reader as it is).
This also fixes pushing with --mirror to a smart-http remote that uses
alternates. The fake ".have" refs the server gives to avoid unnecessary
network transfer has a similar bad interactions with the machinery.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/http-cleanup:
t5541-http-push: add test for chunked
http-push: refactor curl_easy_setup madness
http-push: use const for strings in signatures
http: make curl callbacks match contracts from curl header
Trigger the chunked type of pushing for smart HTTP. This can serve as a
regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS
when initializing a slot).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man
page describe it as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rc/maint-curl-helper:
remote-curl: ensure that URLs have a trailing slash
http: make end_url_with_slash() public
t5541-http-push: add test for URLs with trailing slash
Conflicts:
remote-curl.c
Previously, we blindly assumed that URLs passed to the remote-curl
helper did not end with a trailing slash.
Use the convenience function end_url_with_slash() from http.[ch] to
ensure that URLs have a trailing slash on invocation of the remote-curl
helper, and use the URL as one with a trailing slash throughout.
It is possible for users to pass a URL with a trailing slash to
remote-curl, by, say, setting it in remote.<name>.url in their git
config. The resulting requests have an empty path component (//) and may
break implementations of the http git protocol.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move non-fast forward tests to lib-httpd.sh so that we don't have to
duplicate the tests in both t5540 and t5541.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't feed a multiple-line pattern to grep and expect the them to match
with lines in order.
Simplify the grep expressions in the non-fast-forward tests to check
only for the first line of the non-fast-forward warning - having that
line should be enough assurance that the full warning is printed.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the status of a ref is REF_STATUS_NONE, the remote helper will not
be told to push the ref (via a 'push' command).
However, the remote helper may still act on these refs.
If the helper does act on the ref, and prints a status for it, ignore
the report (ie. don't overwrite the status of the ref with it, nor the
message in the remote_status member) if the reported status is 'no
match'.
This allows the user to be alerted to more "interesting" ref statuses,
like REF_STATUS_NONFASTFORWARD.
Cc: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use push_had_errors() to check the refs for errors and modify the
return value.
Mark the non-fast-forward push tests to succeed.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic that detects up-to-date and non-fast-forward refs to a
new function in remote.[ch], set_ref_status_for_push().
Make transport_push() invoke set_ref_status_for_push() before invoking
the push_refs() implementation. (As a side-effect, the push_refs()
implementation in transport-helper.c now knows of non-fast-forward
pushes.)
Removed logic for detecting up-to-date refs from the push_refs()
implementation in transport-helper.c, as transport_push() has already
done so for it.
Make cmd_send_pack() invoke set_ref_status_for_push() before invoking
send_pack(), as transport_push() can't do it for send_pack() here.
Mark the test on the return status of non-fast-forward push to fail.
Git now exits with success, as transport.c::transport_push() does not
check for refs with status REF_STATUS_REJECT_NONFASTFORWARD nor does it
indicate rejected pushes with its return value.
Mark the test for ref status to succeed. As mentioned earlier, refs
might be marked as non-fast-forwards, triggering the push status
printing mechanism in transport.c.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some refs can only be matched to a remote ref with an explicit refspec.
When such a ref is a non-fast-forward of its remote ref, test that
pushing them (with the explicit refspec specified) fails with a non-
fast-foward-type error (viz. printing of ref status and help message).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top level directory "/smart/" of the test Apache server is mapped
through our git-http-backend CGI, but uses the same underlying
repository space as the server's document root. This is the most
simple installation possible.
Server logs are checked to verify the client has accessed only the
smart URLs during the test. During fetch testing the headers are
also logged from libcurl to ensure we are making a reasonably sane
HTTP request, and getting back reasonably sane response headers
from the CGI.
When validating the request headers used during smart fetch we munge
away the actual Content-Length and replace it with the placeholder
"xxx". This avoids unnecessary varability in the test caused by
an unrelated change in the requested capabilities in the first want
line of the request. However, we still want to look for and verify
that Content-Length was used, because smaller payloads should be
using Content-Length and not "Transfer-Encoding: chunked".
When validating the server response headers we must discard both
Content-Length and Transfer-Encoding, as Apache2 can use either
format to return our response.
During development of this test I observed Apache returning both
forms, depending on when the processes got CPU time. If our CGI
returned the pack data quickly, Apache just buffered the whole
thing and returned a Content-Length. If our CGI took just a bit
too long to complete, Apache flushed its buffer and instead used
"Transfer-Encoding: chunked".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
