This corrects the interface mistake of the previous one, and
gives a command line parameter to the only plumbing command that
currently needs it: "git-read-tree".
We can add the calls to set_alternate_index_output() to other
plumbing commands that update the index if/when needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When defined, this allows plumbing commands that update the
index (add, apply, checkout-index, merge-recursive, mv,
read-tree, rm, update-index, and write-tree) to write their
resulting index to an alternative index file while holding a
lock to the original index file. With this, git-commit that
jumps the index does not have to make an extra copy of the index
file, and more importantly, it can do the update while holding
the lock on the index.
However, I think the interface to let an environment variable
specify the output is a mistake, as shown in the documentation.
If a curious user has the environment variable set to something
other than the file GIT_INDEX_FILE points at, almost everything
will break. This should instead be a command line parameter to
tell these plumbing commands to write the result in the named
file, to prevent stupid mistakes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
You cannot currently checkout the tip of an existing branch
without moving to the branch.
This allows you to detach your HEAD and place it at such a
commit, with:
$ git checkout master^0
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not that this release really matters, as we will be doing
1.5.1 tomorrow. This commit is to tie the loose ends and
merge all of "maint" branch into "master" in preparation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mainly consistent usage of "git command" and not "git-command" syntax
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a file has more then one conflicting hunks, it repeated the
contents of previous hunks in output for later ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not make the checks on the Tcl/Tk interpreter passed by
'--with-tcltk=/path/to/wish' configure option: user is free to pass
anything.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
--with-tcltk=/path/to/wish sets the TCLTK_PATH variable that is
used to substitute the location of the wish interpreter in the
Tcl/Tk programs.
New tracking file, GIT-GUI-VARS, was introduced: it tracks the
location of the Tcl/Tk interpreter and activates the GUI tools
rebuild if the interpreter path was changed. The separate tracker
is better than the GIT-CFLAGS: there is no need to rebuild the whole
git if the interpreter path was changed.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
--with-tcltk enables the search of the Tcl/Tk interpreter. If no
interpreter is found then Tcl/Tk dependend parts are disabled.
--without-tcltk unconditionally disables Tcl/Tk dependent parts.
The original behaviour is not changed: bare './configure' just
installs the Tcl/Tk part doing no checks for the interpreter.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Makefile knob named NO_TCLTK was introduced. It prevents the build
and installation of the Tcl/Tk dependent parts.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
We don't have a copy of subprocess.py anymore, so we removed that
option from the Makefile. Let's not leave that cruft around the RPM
spec file either.
Signed-off-by: Junio C Hamano <junkio@cox.net>
WITH_P4IMPORT: enables the installation of the Perforce import
script.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I thought it would be cool to have different set of colors for each
git-blame-mode. Function `git-blame-new-commit' does this for us
picking when possible, a random colors based on the set we build on
startup. When it fails, `git-blame-ancient-color' will be used. We
also take care not to use the same color more than once (thank you
David Kågedal, really).
* Prevent (future possible) namespace clash by renaming `color-scale'
into `git-blame-color-scale'. Definition has been changed to be more
in the "lisp" way (thanks for help to #emacs). Also added a small
description of what it does.
* Added docstrings at some point and instructed defvar when a variable
was candidate to customisation by users.
* Added missing defvar to silent byte-compilers (git-blame-file,
git-blame-current)
* Do not require 'cl at startup
* Added more informations on compatibility
Signed-off-by: Xavier Maillard <zedek@gnu.org>
Acked-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-blame-mode has been splitted into git-blame-mode-on and
git-blame-mode-off; it now conditionnaly calls one of them depending
of how we call it. Code is now easier to maintain and to understand.
Fixed `git-reblame' function: interactive form was at the wrong
place.
String displayed on the mode line is now configurable through
`git-blame-mode-line-string` (default to " blame").
Signed-off-by: Xavier Maillard <zedek@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The way things are set up, you can now pass a "pathspec" to the
"read_directory()" function. If you pass NULL, it acts exactly
like it used to do (read everything). If you pass a non-NULL
pointer, it will simplify it into a "these are the prefixes
without any special characters", and stop any readdir() early if
the path in question doesn't match any of the prefixes.
NOTE! This does *not* obviate the need for the caller to do the *exact*
pathspec match later. It's a first-level filter on "read_directory()", but
it does not do the full pathspec thing. Maybe it should. But in the
meantime, builtin-add.c really does need to do first
read_directory(dir, .., pathspec);
if (pathspec)
prune_directory(dir, pathspec, baselen);
ie the "prune_directory()" part will do the *exact* pathspec pruning,
while the "read_directory()" will use the pathspec just to do some quick
high-level pruning of the directories it will recurse into.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-cvsserver documentation claims that the server will set
-k modes if appropriate which is not really the case. On the other
hand the available gitcvs.allbinary variable is not documented at
all. Fix both these issues by rewording the related paragraph.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we're on an invalid HEAD, we should detect this and avoid
attempting to continue.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch leaves the base name in the resulting intermediate tree, to
propagate the conflict from intermediate merges up to the top-level merge.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a simple script to create a working directory that uses symlinks
to point at an exisiting repository. This allows having different
branches in different working directories but all from the same
repository.
Based on a description from Junio of how he creates multiple working
directories[1]. With the following caveat:
"This risks confusion for an uninitiated if you update a ref that
is checked out in another working tree, but modulo that caveat
it works reasonably well."
[1] http://article.gmane.org/gmane.comp.version-control.git/41513/
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The update hook is no longer the correct place to generate emails; there
is now the hooks/post-receive script which is run automatically after a
ref has been updated.
This patch is to make use of that new location, and to address some
faults in the old update hook.
The primary problem in the conversion was that in the update hook, the
ref has not actually been changed, but is about to be. In the
post-receive hook the ref has already been updated. That meant that
where we previously had lines like:
git rev-list --not --all
would now give the wrong list because "--all" in the post-receive hook
includes the ref that we are making the email for. This made it more
difficult to show only the new revisions added by this update.
The solution is not pretty; however it does work and doesn't need any
changes to git-rev-list itself. It also fixes (more accurately: reduces
the likelihood of) a nasty race when another update occurs while this
script is running. The solution, in short, looks like this (see the
source code for a longer explanation)
git rev-parse --not --all | grep -v $(git rev-parse $refname) |
git rev-list --pretty --stdin $oldrev..$newrev
This uses git-rev-parse followed by grep to filter out the revision of
the ref in question before it gets to rev-list and inhibits the output
of itself. By using $(git rev-parse $revname) rather than $newrev as the
filter, it also takes care of the situation where another update to the
same ref has been made since $refname was $newrev.
The second problem that is addressed is that of tags inhibiting the
correct output of an update email. Consider this, with somebranch and
sometag pointing at the same revision:
git push origin somebranch
git push origin sometag
That would work fine; the push of the branch would generate an email
containing all the new commits introduced by the update, then the push
of the tag would generate the shortlog formatted tag email. Now
consider:
git push origin sometag
git push origin somebranch
When some branch comes to run its "--not --all" line, it will find
sometag, and filter those commits from the email - leaving nothing.
That meant that those commits would not show (in full) on any email.
The fix is to not use "--all", and instead use "--branches" in the
git-rev-parse command.
Other changes
* Lose the monstrous one-giant-script layout and put things in easy to
digest functions. This makes it much easier to find the place you
need to change if you wanted to customise the output. I've also
tried to write more verbose comments for the same reason. The hook
script is big, mainly because of all the different cases that it has
to handle, so being easy to navigate is important.
* All uses of "git-command" changed to "git command", to cope better
if a user decided not to install all the hard links to git;
* Cleaned up some of the English in the email
* The fact that the receive hook makes the ref available also allows me
to use Shawn Pearce's fantastic suggestion that an annotated tag can
be parsed with git-for-each-ref. This removes the potentially
non-portable use of "<<<" heredocs and the nasty messing around with
"date" to convert numbers of seconds UTC to a real date
* Deletions are now caught and notified (briefly)
* To help with debugging, I've retained the command line mode from the
update hook; but made it so that the output is not emailed, it's just
printed to the screen. This could then be redirected if the user
wanted
* Removed the "Hello" from the beginning of the email - it's just
noise, and no one seriously has their day made happier by "friendly"
programs
* The fact that it doesn't rely on repository state as an indicator any
more means that it's far more stable in its output; hopefully the
same arguments will always generate the same email - even if the
repository changes in the future. This means you can easily recreate
an email should you want to.
* Included Jim Meyering's envelope sender option for the sendmail call
* The hook is now so big that it was inappropriate to copy it
to every repository by keeping it in the templates directory.
Instead, I've put a comment saying to look in contrib/hooks, and
given an example of calling the script from that template hook. The
advantage of calling the script residing at some fixed location is
that if a future package of git included a bug fixed version of the
script, that would be picked up automatically, and the user would not
have to notice and manually copy the new hook to every repository
that uses it.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We ignore errors if the path we're tracking did not exist for
a particular revision range, but we still print out warnings
telling the user about that.
As pointed out by Seth Falcon, this amounts to a lot of warnings
that could confuse and worry users. I'm not entirely comfortable
completely silencing the warnings, but showing one warning per
path that we track should be reasonable.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes a problem reported by Randal Schwartz:
>I finally tracked down all the (albeit inconsequential) errors I was getting
>on both OpenBSD and OSX. It's the warn() function in usage.c. There's
>warn(3) in BSD-style distros. It'd take a "great rename" to change it, but if
>someone with better C skills than I have could do that, my linker and I would
>appreciate it.
It was annoying to me, too, when I was doing some mergetool testing on
Mac OS X, so here's a fix.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Randal L. Schwartz" <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't translate the patch to UTF-8, instead preserve the data as
is. This also reverts a test case that was included in the
original patch series.
Also allow overwriting the authorship and title information we
gather from RFC2822 mail headers with additional in-body
headers, which was pointed out by Linus.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix the bug that caused "blobdiff" view called with new style URI
for a rename with change diff to be show as new (added) file diff.
New style URI for "blobdiff" for rename means with $hash_base ('hb') and
$hash_parent_base ('hpb') paramaters denoting tree-ish (usually commit)
of a blobs being compared, together with both $file_name ('f') and
$file_parent ('fp') parameters.
It is done by adding $file_parent ('fp') to the path limiter, meaning
that diff command becomes:
git diff-tree [options] hpb hb -- fp f
Other option would be finding hash of a blob using git_get_hash_by_path
subroutine and comparing blobs using git-diff, or using extended SHA-1
syntax and compare blobs using git-diff:
git diff [options] hpb:fp hp:f
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-upload-pack: make sure we close unused pipe ends
Documentation/git-rev-parse.txt: fix example in SPECIFYING RANGES.
Documentation/git-svnimport.txt: fix typo.
Bryan Wu reported
/usr/local/bin/git-quiltimport: 114: Syntax error: Missing '))'
Most bourne-ish shells I have here accept
x=$((echo x)|cat)
but all bourne-ish shells I have here accept
x=$( (echo x)|cat)
because $(( might mean arithmetic expansion.
Signed-off-by: Francis Daly <francis@daoine.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
So we can remove the specific message in "bisect_run".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/mergetool.git:
mergetool: Clean up description of files and prompts for merge resolutions
mergetool: Make git-rm quiet when resolving a deleted file conflict
mergetool: Add support for Apple Mac OS X's opendiff command
mergetool: Fix abort command when resolving symlinks and deleted files
mergetool: Remove spurious error message if merge.tool config option not set
mergetool: factor out common code
mergetool: portability fix: don't use reserved word function
mergetool: portability fix: don't assume true is in /bin
mergetool: Don't error out in the merge case where the local file is deleted
mergetool: Replace use of "echo -n" with printf(1) to be more portable
Fix minor formatting issue in man page for git-mergetool
This fixes complaints from Junio for how messages and prompts are
printed when resolving symlink and deleted file merges.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Create common function check_unchanged(), save_backup() and
remove_backup().
Also fix some minor whitespace issues while we're at it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the file we are trying to merge resolve is in git-ls-files -u, then
skip the file existence test. If the file isn't reported in
git-ls-files, then check to see if the file exists or not to give an
appropriate error message.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Right now, we don't close the read end of the pipe when git-upload-pack
runs git-pack-object, so we hang forever (why don't we get SIGALRM?)
instead of dying with SIGPIPE if the latter dies, which seems to be the
norm if the client disconnects.
Thanks to Johannes Schindelin <Johannes.Schindelin@gmx.de> for
pointing out where this close() needed to go.
This patch has been tested on kernel.org for several weeks and appear
to resolve the problem of git-upload-pack processes hanging around
forever.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from commit 465b3518a9)
Please see http://bugs.debian.org/404795:
In git-rev-parse(1), there is an example commit tree, which is used twice.
The explanation for this tree is very clear: B and C are commit *parents* to
A.
However, when the tree is reused as an example in the SPECIFYING RANGES, the
manpage author screws up and uses A as a commit *parent* to B and C! I.e.,
he inverts the tree.
And the fact that for this example you need to read the tree backwards is
not explained anywhere (and it would be confusing even if it was).
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
