Since bc7a96a (mergetool--lib: Refactor tools into separate files,
2011-08-18), it is possible to add a new diff tool by creating a simple
script in the '$(git --exec-path)/mergetools' directory. Updating the
difftool help text is still a manual process, and the documentation can
easily go out of sync.
This commit teaches difftool the '--tool-help' option, which:
- Reads the list of valid tools from 'mergetools/*'
- Determines which of them are actually installed
- Determines which are capable of diffing (i.e. not just a merge tool)
- Prints the resulting list for the user
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'difftool' is called to compare a range of commits that modify
more than one file, it opens a separate instance of the diff tool for
each file that changed.
The new '--dir-diff' option copies all the modified files to a temporary
location and runs a directory diff on them in a single instance of the
diff tool.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Break down the cases in which "git push" fails due to non-ff into
three categories, and give separate advise messages for each case.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
"git am" learned the "--include" option, which is an opposite of existing
the "--exclude" option.
By Johannes Berg
* jb/am-include:
am: support --include option
It can be convenient to push many strings in a single line
(e.g., if you are initializing an array with defaults). This
patch provides a convenience wrapper to allow this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git commit --template F" errors out because the user did not touch
the message, it claimed that it aborts due to "empty message", which was
utterly wrong.
By Junio C Hamano (4) and Adam Monsen (1)
* jc/commit-unedited-template:
Documentation/git-commit: rephrase the "initial-ness" of templates
git-commit.txt: clarify -t requires editing message
commit: rephrase the error when user did not touch templated log message
commit: do not trigger bogus "has templated message edited" check
t7501: test the right kind of breakage
Even with "-q"uiet option, "checkout" used to report setting up tracking.
Also "branch" learns "-q"uiet option to squelch informational message.
By Jeff King
* jk/branch-quiet:
teach "git branch" a --quiet option
checkout: suppress tracking message with "-q"
If fast-import's command pipe and the frontend's cat-blob/ls response
pipe are both filled, there can be a deadlock. Luckily all existing
frontends consume any pending cat-blob/ls responses completely before
writing the next command.
Document the requirements so future frontend authors and users can be
spared from the problem, too. It is not always easy to catch that
kind of bug by testing.
To set the scene, add some words of explanation to help the novice
understand that "cat-blob" and "ls" output are meant for consumption
by the frontend.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git cherry-pick fails when picking a non-ff commit that is empty. The advice
given with the failure is that a git-commit --allow-empty should be issued to
explicitly add the empty commit during the cherry pick. This option allows a
user to specify before hand that they want to keep the empty commit. This
eliminates the need to issue both a cherry pick and a commit operation.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I tentatively named the release notes "1.7.11" but this may have to
be renamed to "1.8" or some other name later. Let's see how well
we would do during this cycle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing label import code looks at each commit being
imported, and then checks for labels at that commit. This
doesn't work in the real world though because it will drop
labels applied on changelists that have already been imported,
a common pattern.
This change adds a new --import-labels option. With this option,
at the end of the sync, git p4 gets sets of labels in p4 and git,
and then creates a git tag for each missing p4 label.
This means that tags created on older changelists are
still imported.
Tags that could not be imported are added to an ignore
list.
The same sets of git and p4 tags and labels can also be used to
derive a list of git tags to export to p4. This is enabled with
--export-labels in 'git p4 submit'.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the default pager and editor chosen at compile time in the
git-var(1) manpage so users curious about what command _this_ copy of
git will fall back to when EDITOR, VISUAL, and PAGER are unset can
find the answer quickly.
In builds leaving those settings uncustomized, this patch makes the
manpage continue to say "usually vi" and "usually less" so the
formatted documentation is usable for a wide audience including users
of custom builds that change those settings. If you would like your
copy of the docs to be less noncommittal, you will need to set
DEFAULT_PAGER=less and DEFAULT_EDITOR=vi explicitly.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
With the "--index-version <n>" parameter, write the index out in the
specified version. With this, an index file that is written in newer
format (say v4) can be downgraded to be read by older versions of Git.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of "commit -t <file>" said the file is used "as the
initial version" of the commit message, but in the context of an SCM,
"version" is a loaded word that can needlesslyl confuse readers.
Explain the purpose of the mechanism without using "version".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a remote repo has too many tags (or branches), cloning it over the
smart HTTP transport can fail because remote-curl.c puts all the refs
from the remote repo on the fetch-pack command line. This can make the
command line longer than the global OS command line limit, causing
fetch-pack to fail.
This is especially a problem on Windows where the command line limit is
orders of magnitude shorter than Linux. There are already real repos out
there that msysGit cannot clone over smart HTTP due to this problem.
Here is an easy way to trigger this problem:
git init too-many-refs
cd too-many-refs
echo bla > bla.txt
git add .
git commit -m test
sha=$(git rev-parse HEAD)
tag=$(perl -e 'print "bla" x 30')
for i in `seq 50000`; do
echo $sha refs/tags/$tag-$i >> .git/packed-refs
done
Then share this repo over the smart HTTP protocol and try cloning it:
$ git clone http://localhost/.../too-many-refs/.git
Cloning into 'too-many-refs'...
fatal: cannot exec 'fetch-pack': Argument list too long
50k tags is obviously an absurd number, but it is required to
demonstrate the problem on Linux because it has a much more generous
command line limit. On Windows the clone fails with as little as 500
tags in the above loop, which is getting uncomfortably close to the
number of tags you might see in real long lived repos.
This is not just theoretical, msysGit is already failing to clone our
company repo due to this. It's a large repo converted from CVS, nearly
10 years of history.
Four possible solutions were discussed on the Git mailing list (in no
particular order):
1) Call fetch-pack multiple times with smaller batches of refs.
This was dismissed as inefficient and inelegant.
2) Add option --refs-fd=$n to pass a an fd from where to read the refs.
This was rejected because inheriting descriptors other than
stdin/stdout/stderr through exec() is apparently problematic on Windows,
plus it would require changes to the run-command API to open extra
pipes.
3) Add option --refs-from=$tmpfile to pass the refs using a temp file.
This was not favored because of the temp file requirement.
4) Add option --stdin to pass the refs on stdin, one per line.
In the end this option was chosen as the most efficient and most
desirable from scripting perspective.
There was however a small complication when using stdin to pass refs to
fetch-pack. The --stateless-rpc option to fetch-pack also uses stdin for
communication with the remote server.
If we are going to sneak refs on stdin line by line, it would have to be
done very carefully in the presence of --stateless-rpc, because when
reading refs line by line we might read ahead too much data into our
buffer and eat some of the remote protocol data which is also coming on
stdin.
One way to solve this would be to refactor get_remote_heads() in
fetch-pack.c to accept a residual buffer from our stdin line parsing
above, but this function is used in several places so other callers
would be burdened by this residual buffer interface even when most of
them don't need it.
In the end we settled on the following solution:
If --stdin is specified without --stateless-rpc, fetch-pack would read
the refs from stdin one per line, in a script friendly format.
However if --stdin is specified together with --stateless-rpc,
fetch-pack would read the refs from stdin in packetized format
(pkt-line) with a flush packet terminating the list of refs. This way we
can read the exact number of bytes that we need from stdin, and then
get_remote_heads() can continue reading from the same fd without losing
a single byte of remote protocol data.
This way the --stdin option only loses generality and scriptability when
used together with --stateless-rpc, which is not easily scriptable
anyway because it also uses pkt-line when talking to the remote server.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that, when using commit --template, the message *must* be
changed or the commit will be aborted.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ivan Heffner <iheffner@gmail.com>
Signed-off-by: Adam Monsen <haircut@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some distributors customize the fallback pager and editor used by git
commands when the user has not indicated a preference via the
core.editor/core.pager configuration or GIT_EDITOR, GIT_PAGER, VISUAL,
EDITOR, and PAGER environment variables, and git's build system
provides DEFAULT_PAGER and DEFAULT_EDITOR makefile settings to help
them with that (see v1.6.6-rc0~24, 2009-11-20).
Unfortunately those compile-time settings do not affect the
documentation, so the uninitiated user who tries to understand git by
reading the git-var(1) manpage can easily be confused when git falls
back to 'nano' and 'more' instead of 'vi' and 'less'. Even if the
distributor patches the distributed docs to reflect the new default,
the user may read the official documentation from the git-htmldocs
repository online and be confused in the same way.
Add a few words stating that the defaults are customizable at
compile time to make the behavior crystal clear.
Reported-by: Rodrigo Silva (MestreLion) <linux@rodrigosilva.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using this option git will search for all submodules that
have changed in the revisions to be send. It will then try to
push the currently checked out branch of each submodule.
This helps when a user has finished working on a change which
involves submodules and just wants to push everything in one go.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found by running this command:
$ git ls-files -z|xargs -0 perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt]o)\s+\1\b/gims)' \
-e ' {' \
-e ' $n = ($` =~ tr/\n/\n/ + 1);' \
-e ' ($v = $&) =~ s/\n/\\n/g;' \
-e ' print "$ARGV:$n:$v\n";' \
-e ' }'
Why not just git grep -E ...?
That wouldn't work then the doubled words are separated by a newline.
This is derived from a Makefile syntax-check rule in gnulib's maint.mk:
http://git.sv.gnu.org/cgit/gnulib.git/tree/top/maint.mk
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
am supports a number of pass-through options
to apply, like --exclude and --directory. Add
--include to this list.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's currently no way to suppress the informational
"deleted branch..." or "set up tracking..." messages. This
patch provides a "-q" option to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the other options were included in the synopsis, so it makes
sense to include these as well.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously GIT_EDITOR was not listed in git(1) "Environment Variables" section,
which could be very confusing to users. Include it in "other" subsection along
with a link to git-var(1), since that is the page that fully describes all
places where editor can be set and also their preference order.
Also, git-var(1) did not say that hardcoded fallback 'vi' may have been changed
at build time. A user could be puzzled if 'nano' pops up even when none of the
mentioned environment vars or config.editor are set. Clarify this.
Ideally, the build system should be changed to reflect the chosen fallback
editor when creating the man pages. Not sure if that is even possible though.
Signed-off-by: Rodrigo Silva (MestreLion) <linux@rodrigosilva.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An alphabetic ordered list (a.) is converted to numerical in
the man page (1.) so context comments naming 'a' were confusing,
fix that by not using ordered list notation for 'a' anb 'b' items.
Signed-off-by: Nelson Benitez Leon <nelsonjesus.benitez@seap.minhap.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "it's" to "its" where a possessive is intended. Also add two
missing "the" that were noticed by Ben Walton.
Signed-off-by: David Waitzman <djw@bbn.com>
Even though 1.7.9.x series does not open the editor by default
when merging in general, it does do so in one occassion: when
merging an annotated tag. And worse yet, there is no good way
for older scripts to decline this.
Backport the support for GIT_MERGE_AUTOEDIT environment variable
from 1.7.10 track to help those stuck on 1.7.9.x maintenance
track.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
deltawalker has been supported since 284a126c3e, but was not added
to the list of valid diff tools reported by 'git difftool --help'.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous description was confusing. This rewrite makes it easier
to understand.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have had these options as harmless no-op for more than 3 years without
officially deprecating them. Let's announce the deprecation and start
warning against their use, but without failing the command just not yet,
so that we can later repurpose the option if we want to in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the 'remaining' command to the documentation of
'git rerere'. This command was added in ac49f5ca (Feb 16 2011;
Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>) but
it was never documented.
Touch up the other rerere commands to reduce noise.
First noticed by Vincent van Ravesteijn.
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Vincent van Ravesteijn
* vr/branch-doc:
Documentation/git-branch: add default for --contains
Documentation/git-branch: fix a typo
Documentation/git-branch: cleanups
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
Indicate that the commit parameter of --contains defaults to HEAD.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the exact option strings to be typed by end users are
already set in typewriter font by using `--option`, but a few places
used '--option' to call for italics or with no quoting. Uniformly
use `--option`.
Also add a full-stop after a sentence that missed one.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword the misspelled "squelch" noticed by Hermann Gaustere to say
"omit", which would sit better anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.9.3 for the last time
http.proxy: also mention https_proxy and all_proxy
t0300: work around bug in dash 0.5.6
t5512 (ls-remote): modernize style
tests: fix spurious error when run directly with Solaris /usr/xpg4/bin/sh
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
The current wording of the http.proxy documentation suggests that
http_proxy is somehow equivalent to http.proxy. However, while
http.proxy (by the means of curl's CURLOPT_PROXY option) overrides the
proxy for both HTTP and HTTPS protocols, the http_proxy environment
variable is used only for HTTP. But since the docs mention only
http_proxy, a user might expect it to apply to all HTTP-like protocols.
Avoid any such misunderstanding by explicitly mentioning https_proxy and
all_proxy as well.
Also replace linkgit:curl[1] with a literal 'curl(1)', because the
former gets translated to a dead link in the HTML pages.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explained <rev>~<n> as <n>th generation grand-parent, but a reader got
confused by the "grand-" part when <n> is 1.
Reword it with "ancestor"; with the "generation" and "following only the
first parents" around there, what we try to describe should be clear
enough now.
Noticed-by: Luke Diamand <luke@diamand.org>
Helped-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --stat-graph-width=<width> can be used to limit the width
of the graph part even is more space is available. Up to <width>
columns will be used for the graph.
If commits changing a lot of lines are displayed in a wide terminal
window (200 or more columns), and the +- graph uses the full width,
the output can be hard to comfortably scan with a horizontal movement
of human eyes. Messages wrapped to about 80 columns would be
interspersed with very long +- lines. It makes sense to limit the
width of the graph part to a fixed value (e.g. 70 columns), even if
more columns are available.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way that available columns are divided between the filename part
and the graph part is modified to use as many columns as necessary for
the filenames and the rest for the graph.
If there isn't enough columns to print both the filename and the
graph, at least 5/8 of available space is devoted to filenames. On a
standard 80 column terminal, or if not connected to a terminal and
using the default of 80 columns, this gives the same partition as
before.
The effect of this change is visible in the patch to the test vector
in t4052; with a small change with long filename, it stops truncating
the name part too short, and also allocates a bit more columns to the
graph for larger changes.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Variable names must start with an alphabetic character, regexp config key
matching has its limits, sentence grammar.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default output from "fsck" is often overwhelmed by informational
message on dangling objects, especially if you do not repack often, and a
real error can easily be buried.
Add "--no-dangling" option to omit them, and update the user manual to
demonstrate its use.
Based on a patch by Clemens Buchacher, but reverted the part to change
the default to --no-dangling, which is unsuitable for the first patch.
The usual three-step procedure to break the backward compatibility over
time needs to happen on top of this, if we were to go in that direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Text between two '*' is emphasized in AsciiDoc and makes explanations in
rev-list-options.txt on glob-related options very confusing, as the
rendered text would be missing two asterisks and the text between them
would be emphasized instead.
Use '{asterisk}' where needed to make them show up as asterisks in the
rendered text.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful to resolve a symbolic ref and output the result in a
shortened form, such as for use in shell prompts. Add a "--short" option
to do so.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.9.3
CodingGuidelines: do not use 'which' in shell scripts
CodingGuidelines: Add a note about spaces after redirection
post-receive-email: match up $LOGBEGIN..$LOGEND pairs correctly
post-receive-email: remove unused variable
During the code review of a recent patch, it was noted that shell scripts
must not use 'which $cmd' to check the availability of the command $cmd.
The output of the command is not machine parseable and its exit code is
not reliable across platforms.
It is better to use 'type' to accomplish this task.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During code review of some patches, it was noted that redirection operators
should have space before, but no space after them.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option was already shown in -h output, so it should be documented
in the man page.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Suggested-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
* fc/push-prune:
push: add '--prune' option
remote: refactor code into alloc_delete_ref()
remote: reorganize check_pattern_match()
remote: use a local variable in match_push_refs()
Conflicts:
builtin/push.c
* maint:
Document accumulated fixes since 1.7.9.2
Git 1.7.8.5
grep -P: Fix matching ^ and $
am: don't infloop for an empty input file
rebase -m: only call "notes copy" when rewritten exists and is non-empty
git-p4: remove bash-ism in t9800
git-p4: remove bash-ism in t9809
git-p4: fix submit regression with clientSpec and subdir clone
git-p4: set useClientSpec variable on initial clone
Makefile: add thread-utils.h to LIB_H
Conflicts:
RelNotes
t/t9809-git-p4-client-view.sh
If --use-client-spec was given, set the matching configuration
variable. This is necessary to ensure that future submits
work properly.
The alternatives of requiring the user to set it, or providing
a command-line option on every submit, are error prone.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long options can be negated by adding no- right after the leading
two dashes. This is useful e.g. to override options set by aliases.
For options that are defined to start with no- already, this looks
a bit funny. Allow such options to also be negated by removing the
prefix.
The following thirteen options are affected:
apply --no-add
bisect--helper --no-checkout
checkout-index --no-create
clone --no-checkout --no-hardlinks
commit --no-verify --no-post-rewrite
format-patch --no-binary
hash-object --no-filters
read-tree --no-sparse-checkout
revert --no-commit
show-branch --no-name
update-ref --no-deref
The following five are NOT affected because they are defined with
PARSE_OPT_NONEG or the non-negated version is defined as well:
branch --no-merged
format-patch --no-stat --no-numbered
update-index --no-assume-unchanged --no-skip-worktree
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify strbuf_getline() documentation, and add the missing documentation
for strbuf_getwholeline() and strbuf_getwholeline_fd().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ld/git-p4-expanded-keywords:
: Teach git-p4 to unexpand $RCS$-like keywords that are embedded in
: tracked contents in order to reduce unnecessary merge conflicts.
git-p4: add initial support for RCS keywords
* jk/config-include:
: An assignment to the include.path pseudo-variable causes the named file
: to be included in-place when Git looks up configuration variables.
config: add include directive
config: eliminate config_exclusive_filename
config: stop using config_exclusive_filename
config: provide a version of git_config with more options
config: teach git_config_rename_section a file argument
config: teach git_config_set_multivar_in_file a default path
config: copy the return value of prefix_filename
t1300: add missing &&-chaining
docs/api-config: minor clarifications
docs: add a basic description of the config API
RCS keywords cause problems for git-p4 as perforce always
expands them (if +k is set) and so when applying the patch,
git reports that the files have been modified by both sides,
when in fact they haven't.
This change means that when git-p4 detects a problem applying
a patch, it will check to see if keyword expansion could be
the culprit. If it is, it strips the keywords in the p4
repository so that they match what git is expecting. It then
has another go at applying the patch.
This behaviour is enabled with a new git-p4 configuration
option and is off by default.
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was part of the "branch description" feature in the larger
"help people communicate better during their pull based workflow"
topic, but was never documented.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing groups of refs to a remote, there is no simple way to remove
old refs that still exist at the remote that is no longer updated from us.
This will allow us to remove such refs from the remote.
With this change, running this command
$ git push --prune remote refs/heads/*:refs/remotes/laptop/*
removes refs/remotes/laptop/foo from the remote if we do not have branch
"foo" locally anymore.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --ff-only option was not described next to --ff and --no-ff options in
"git merge" documentation, even though these three are logically together,
describing how to choose one of three possibilities.
Also the description for '--ff' and '--no-ff' discussed what '--ff' means,
and mentioned '--no-ff' as if it were a side-note to '--ff'.
Make them into three top-level entries and list them together. This way,
it would be more clear that the user can choose one from these three.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The canonical order of command line arguments is always to have dashed
commands before other parameters, but the "git remote set-branches"
subcommand was described to take "name" before an optional "--add".
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to split your ~/.gitconfig across multiple
files. For example, you might have a "main" file which is
used on many machines, but a small set of per-machine
tweaks. Or you may want to make some of your config public
(e.g., clever aliases) while keeping other data back (e.g.,
your name or other identifying information). Or you may want
to include a number of config options in some subset of your
repos without copying and pasting (e.g., you want to
reference them from the .git/config of participating repos).
This patch introduces an include directive for config files.
It looks like:
[include]
path = /path/to/file
This is syntactically backwards-compatible with existing git
config parsers (i.e., they will see it as another config
entry and ignore it unless you are looking up include.path).
The implementation provides a "git_config_include" callback
which wraps regular config callbacks. Callers can pass it to
git_config_from_file, and it will transparently follow any
include directives, passing all of the discovered options to
the real callback.
Include directives are turned on automatically for "regular"
git config parsing. This includes calls to git_config, as
well as calls to the "git config" program that do not
specify a single file (e.g., using "-f", "--global", etc).
They are not turned on in other cases, including:
1. Parsing of other config-like files, like .gitmodules.
There isn't a real need, and I'd rather be conservative
and avoid unnecessary incompatibility or confusion.
2. Reading single files via "git config". This is for two
reasons:
a. backwards compatibility with scripts looking at
config-like files.
b. inspection of a specific file probably means you
care about just what's in that file, not a general
lookup for "do we have this value anywhere at
all". If that is not the case, the caller can
always specify "--includes".
3. Writing files via "git config"; we want to treat
include.* variables as literal items to be copied (or
modified), and not expand them. So "git config
--unset-all foo.bar" would operate _only_ on
.git/config, not any of its included files (just as it
also does not operate on ~/.gitconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers may want to provide a specific version of a file in which to look
for config. Right now this can be done by setting the magic global
config_exclusive_filename variable. By providing a version of git_config
that takes a filename, we can take a step towards making this magic global
go away.
Furthermore, by providing a more "advanced" interface, we now have a a
natural place to add new options for callers like git-config, which care
about tweaking the specifics of config lookup, without disturbing the
large number of "simple" users (i.e., every other part of git).
The astute reader of this patch may notice that the logic for handling
config_exclusive_filename was taken out of git_config_early, but added
into git_config. This means that git_config_early will no longer respect
config_exclusive_filename. That's OK, because the only other caller of
git_config_early is check_repository_format_gently, but the only function
which sets config_exclusive_filename is cmd_config, which does not call
check_repository_format_gently (and if it did, it would have been a bug,
anyway, as we would be checking the repository format in the wrong file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first change simply drops some parentheses to make a
statement more clear. The seconds clarifies that almost
nobody wants to call git_config_early.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, a missing filter driver or a failure from the filter driver is
not an error, but merely makes the filter operation a no-op pass through.
This is useful to massage the content into a shape that is more convenient
for the platform, filesystem, and the user to use, and the content filter
mechanism is not used to turn something unusable into usable.
However, we could also use of the content filtering mechanism and store
the content that cannot be directly used in the repository (e.g. a UUID
that refers to the true content stored outside git, or an encrypted
content) and turn it into a usable form upon checkout (e.g. download the
external content, or decrypt the encrypted content). For such a use case,
the content cannot be used when filter driver fails, and we need a way to
tell Git to abort the whole operation for such a failing or missing filter
driver.
Add a new "filter.<driver>.required" configuration variable to mark the
second use case. When it is set, git will abort the operation when the
filter driver does not exist or exits with a non-zero status code.
Signed-off-by: Jehan Bing <jehan@orb.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line was extended in 2dd8c3 ('git: add --info-path and --man-path
options'), and the formatted man output stopped fitting into the 80
column window.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Again this round mostly consists of fixes for 1.7.9 in preparation for
merging these topics down to maint for 1.7.9.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document bunch of bugfix topics to be merged down to 'maint' soonish
for 1.7.9.1 maintenance release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This filters the list for tags of the given object.
Example,
john$ git tag v1.0-john v1.0
john$ git tag -l --points-at v1.0
v1.0-john
v1.0
Signed-off-by: Tom Grennan <tmgrennan@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This wasn't documented at all; this is pretty bare-bones,
but it should at least give new git hackers a basic idea of
how the reading side works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/clone-detached:
clone: fix up delay cloning conditions
push: do not let configured foreign-vcs permanently clobbered
clone: print advice on checking out detached HEAD
clone: allow --branch to take a tag
clone: refuse to clone if --branch points to bogus ref
clone: --branch=<branch> always means refs/heads/<branch>
clone: delay cloning until after remote HEAD checking
clone: factor out remote ref writing
clone: factor out HEAD update code
clone: factor out checkout code
clone: write detached HEAD in bare repositories
t5601: add missing && cascade
When asking for a tag to be pulled, disambiguate by leaving tags/ prefix
in front of the name of the tag. E.g.
... in the git repository at:
git://example.com/git/git.git/ tags/v1.2.3
for you to fetch changes up to 123456...
This way, older versions of "git pull" can be used to respond to such a
request more easily, as "git pull $URL v1.2.3" did not DWIM to fetch
v1.2.3 tag in older versions. Also this makes it clearer for humans that
the pull request is made for a tag and he should anticipate a signed one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pw/p4-view-updates:
git-p4: add tests demonstrating spec overlay ambiguities
git-p4: adjust test to adhere to stricter useClientSpec
git-p4: clarify comment
git-p4: fix verbose comment typo
git-p4: only a single ... wildcard is supported
Traditionally, a cleanly resolved merge was committed by "git merge" using
the auto-generated merge commit log message without invoking the editor.
After 5 years of use in the field, it turns out that people perform too
many unjustified merges of the upstream history into their topic branches.
These merges are not just useless, but they are often not explained well,
and making the end result unreadable when it gets time for merging their
history back to their upstream.
Earlier we added the "--edit" option to the command, so that people can
edit the log message to explain and justify their merge commits. Let's
take it one step further and spawn the editor by default when we are in an
interactive session (i.e. the standard input and the standard output are
pointing at the same tty device).
There may be existing scripts that leave the standard input and the
standard output of the "git merge" connected to whatever environment the
scripts were started, and such invocation might trigger the above
"interactive session" heuristics. GIT_MERGE_AUTOEDIT environment variable
can be set to "no" at the beginning of such scripts to use the historical
behaviour while the script runs.
Note that this backward compatibility is meant only for scripts, and we
deliberately do *not* support "merge.edit = yes/no/auto" configuration
option to allow people to keep the historical behaviour.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a tag ref cannot be put to HEAD, HEAD will become detached.
This is consistent with "git checkout <tag>".
This is mostly useful in shallow clone, where it allows you to clone a
tag in addtion to branches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am could pass -k to mailinfo, but not -b. Introduce an option
that does so. We change the meaning of the 'keep' state file, but are
careful not to cause a problem unless you downgrade in the middle of
an 'am' run.
This uncovers a bug in mailinfo -b, hence the failing test.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's actually unlimited recursion if wildcards are active regardless
--max-depth
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two "^" characters were incorrectly being interpreted as markup for
superscripting. Fix them by writing them as attribute references
"{caret}".
Although a single "^" character in a paragraph cannot be
misinterpreted in this way, also write other "^" characters as
"{caret}" in the interest of good hygiene (unless they are in literal
paragraphs, of course, in which context attribute references are not
recognized).
Spell "{}" consistently, namely *not* quoted as "\{\}". Since the
braces are empty, they cannot be interpreted as an attribute
reference, and either spelling is OK. So arbitrarily choose one
variation and use it consistently.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.8.4
Update draft release notes to 1.7.7.6
Update draft release notes to 1.7.6.6
thin-pack: try harder to use preferred base objects as base
