Consolidate two messages phrased subtly differently without a good
reason.
* jc/rm-submodule-error-message:
builtin/rm.c: consolidate error reporting for removing submodules
The push() method in remote-curl.c is not told and does not pass the
necessary information to underlying send-pack, so this extension
does not yet work. Leave a note in the test suite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using pathspec filtering in combination with diff-based log
output, parent simplification happens before the diff is computed.
The diff is therefore against the *simplified* parents.
This works okay, arguably by accident, in the normal case:
simplification reduces to one parent as long as the commit is TREESAME
to it. So the simplified parent of any given commit must have the
same tree contents on the filtered paths as its true (unfiltered)
parent.
However, --full-diff breaks this guarantee, and indeed gives pretty
spectacular results when comparing the output of
git log --graph --stat ...
git log --graph --full-diff --stat ...
(--graph internally kicks in parent simplification, much like
--parents).
To fix it, store a copy of the parent list before simplification (in a
slab) whenever --full-diff is in effect. Then use the stored parents
instead of the simplified ones in the commit display code paths. The
latter do not actually check for --full-diff to avoid duplicated code;
they just grab the original parents if save_parents() has not been
called for this revision walk.
For ordinary commits it should be obvious that this is the right thing
to do.
Merge commits are a bit subtle. Observe that with default
simplification, merge simplification is an all-or-nothing decision:
either the merge is TREESAME to one parent and disappears, or it is
different from all parents and the parent list remains intact.
Redundant parents are not pruned, so the existing code also shows them
as a merge.
So if we do show a merge commit, the parent list just consists of the
rewrite result on each parent. Running, e.g., --cc on this in
--full-diff mode is not very useful: if any commits were skipped, some
hunks will disagree with all sides of the merge (with one side,
because commits were skipped; with the others, because they didn't
have those changes in the first place). This triggers --cc showing
these hunks spuriously.
Therefore I believe that even for merge commits it is better to show
the diffs wrt. the original parents.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We spell config variables in camelCase instead of with_underscores.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Existing configuration parsing functions (e.g. http_options() in
http.c) know how to parse two-level configuration variable names.
We would like to exploit them and parse something like this:
[http]
sslVerify = true
[http "https://weak.example.com"]
sslVerify = false
and pretend as if http.sslVerify were set to false when talking to
"https://weak.example.com/path".
Introduce `urlmatch_config_entry()` wrapper that:
- is called with the target URL (e.g. "https://weak.example.com/path"),
and the two-level variable parser (e.g. `http_options`);
- uses `url_normalize()` and `match_urls()` to see if configuration
data matches the target URL; and
- calls the traditional two-level configuration variable parser
only for the configuration data whose <url> part matches the
target URL (and if there are multiple matches, only do so if the
current match is a better match than the ones previously seen).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some http.* configuration variables need to take values customized
for the URL we are talking to. We may want to set http.sslVerify to
true in general but to false only for a certain site, for example,
with a configuration file like this:
[http]
sslVerify = true
[http "https://weak.example.com"]
sslVerify = false
and let the configuration machinery pick up the latter only when
talking to "https://weak.example.com". The latter needs to kick in
not only when the URL is exactly "https://weak.example.com", but
also is anything that "match" it, e.g.
https://weak.example.com/testhttps://me@weak.example.com/test
The <url> in the configuration key consists of the following parts,
and is considered a match to the URL we are attempting to access
under certain conditions:
. Scheme (e.g., `https` in `https://example.com/`). This field
must match exactly between the config key and the URL.
. Host/domain name (e.g., `example.com` in `https://example.com/`).
This field must match exactly between the config key and the URL.
. Port number (e.g., `8080` in `http://example.com:8080/`). This
field must match exactly between the config key and the URL.
Omitted port numbers are automatically converted to the correct
default for the scheme before matching.
. Path (e.g., `repo.git` in `https://example.com/repo.git`). The
path field of the config key must match the path field of the
URL either exactly or as a prefix of slash-delimited path
elements. A config key with path `foo/` matches URL path
`foo/bar`. A prefix can only match on a slash (`/`) boundary.
Longer matches take precedence (so a config key with path
`foo/bar` is a better match to URL path `foo/bar` than a config
key with just path `foo/`).
. User name (e.g., `me` in `https://me@example.com/repo.git`). If
the config key has a user name, it must match the user name in
the URL exactly. If the config key does not have a user name,
that config key will match a URL with any user name (including
none), but at a lower precedence than a config key with a user
name.
Longer matches take precedence over shorter matches.
This step adds two helper functions `url_normalize()` and
`match_urls()` to help implement the above semantics. The
normalization rules are based on RFC 3986 and should result in any
two equivalent urls being a match.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a NULL-pointer dereference during nested iterations over
references (for example, when replace references are being used).
* mh/packed-refs-do-one-ref-recursion:
do_one_ref(): save and restore value of current_ref
The existing code triggers only when the configuration variable is
set to true. Once the variable is set to true in a more generic
configuration file (e.g. ~/.gitconfig), it cannot be overriden to
false in the repository specific one (e.g. .git/config).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the new is_staging_gitmodules_ok() and stage_updated_gitmodules()
functions to submodule.c. The first makes it possible for call sites to
see if the .gitmodules file did contain any unstaged modifications they
would accidentally stage in addition to those they intend to stage
themselves. The second function stages all modifications to the
.gitmodules file, both will be used by subsequent patches for the mv
and rm commands.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When moving a submodule which uses a gitfile to point to the git directory
stored in .git/modules/<name> of the superproject two changes must be made
to make the submodule work: the .git file and the core.worktree setting
must be adjusted to point from work tree to git directory and back.
Achieve that by remembering which submodule uses a gitfile by storing the
result of read_gitfile() of each submodule. If that is not NULL the new
function connect_work_tree_and_git_dir() is called after renaming the
submodule's work tree which updates the two settings to the new values.
Extend the man page to inform the user about that feature (and while at it
change the description to not talk about a script anymore, as mv is a
builtin for quite some time now).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the attempt to use "git mv" on a submodule errors out with:
fatal: source directory is empty, source=<src>, destination=<dest>
The reason is that mv searches for the submodule with a trailing slash in
the index, which it doesn't find (because it is stored without a trailing
slash). As it doesn't find any index entries inside the submodule it
claims the directory would be empty even though it isn't.
Fix that by searching for the name without a trailing slash and continue
if it is a submodule. Then rename() will move the submodule work tree just
like it moves a file.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just a demonstration of how the code would look like; I do
not think it is particularly easier to read than before myself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to define a set of mutually exclusive "command
mode" options, and automatically catch use of more than one from
that set as an error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP servers may send Set-Cookie headers in a response and expect them
to be set on subsequent requests. By default, libcurl behavior is to
store such cookies in memory and reuse them across requests within a
single session. However, it may also make sense, depending on the
server and the cookies, to store them across sessions. Provide users
an option to enable this behavior, writing cookies out to the same
file specified in http.cookiefile.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use Apple's supported functions for base64 encoding instead
of the deprecated OpenSSL functions.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove sq_quote_print() since it has no callers.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By rewriting the loop that formats the argv[] in cmd_tar_tree()
function using sq_quote_argv() for code simplicity, the last use of
sq_quote_print() goes away.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The print_value() function in for-each-ref.c prints values to stdout
immediately using {sq|perl|python|tcl}_quote_print(). Change these
lower-level quote functions to instead leave their results in strbuf
so that we can later add post-processing to the results of them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the libexec directory doesn't exist, git-subtree gets installed as
$prefix/share/libexec/git-core file. This patch creates the directory
before installing git-subtree file into it.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By improving the relative_path() algorithm, e02ca72 (path.c:
refactor relative_path(), not only strip prefix, 2013-06-25)
uncovered a latent bug in Emacs. While most editor applications
like cat and vim handle non-canonicalized relative paths fine, emacs
does not. This is due to a long-standing bug in emacs, where it
refuses to resolve symlinks in the supplied path:
#!/bin/sh
cd /tmp
mkdir z z/a z/b
echo moodle >z/a/file
ln -s z/b
cd b
emacs ../a/file # fail: attempts to open /tmp/a/file
Even if emacs were to be patched to fix this bug, it may be nicer to
help users running older versions.
Note that this can potentially regress for users of all editors,
when they ask "what file am I editing?" to the editor, as it is
likely to answer with an unsightly long full path.
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`echo -n` is non-portable. The POSIX specification says:
Conforming applications that wish to do prompting without <newline>
characters or that could possibly be expecting to echo a -n, should
use the printf utility derived from the Ninth Edition system.
Since all of the affected shell scripts use a POSIX shell shebang,
replace `echo -n` invocations with printf.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The slab initialization code includes the calculation of the
slab 'elem_size', which is in turn used to determine the size
(capacity) of the slab. Each element of the slab represents an
array, of length 'stride', of 'elemtype'. (Note that it may be
clearer if the define_commit_slab macro parameter was called
'basetype' rather than 'elemtype'). However, the 'elem_size'
calculation incorrectly uses 'sizeof(struct slabname)' in the
expression, rather than 'sizeof(elemtype)'.
Within the slab access routine, <slabname>_at(), the given commit
'index' is transformed into an (slab#, slot#) pair used to address
the required element (a pointer to the first element of the array
of 'elemtype' associated with that commit). The current code to
calculate these address coordinates multiplies the commit index
by the 'stride' which, at least for the slab#, produces the wrong
result. Using the commit index directly, without scaling by the
'stride', produces the correct 'logical' address.
Also, when allocating a new slab, the size of the allocation only
allows for a slab containing elements of single element arrays of
'elemtype'. This should allow for elements of an array of length
'stride' of 'elemtype'. In order to fix this, we need to change
the element size parameter to xcalloc() by multiplying the current
element size (sizeof(**s->slab)) by the s->stride.
Having changed the calculation of the slot#, we now need to convert
the logical 'nth_slot', by scaling with s->stride, into the correct
physical address.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we refuse to make an empty commit, we check whether we
are in a cherry-pick in order to give better advice on how
to proceed. We instruct the user to repeat the commit with
"--allow-empty" to force the commit, or to use "git reset"
to skip it and abort the cherry-pick.
In the case of a single cherry-pick, the distinction between
skipping and aborting is not important, as there is no more
work to be done afterwards. When we are using the sequencer
to cherry pick a series of commits, though, the instruction
is confusing: does it skip this commit, or does it abort the
rest of the cherry-pick?
It does skip, after which the user can continue the
cherry-pick. This is the right thing to be advising the user
to do, but let's make it more clear what will happen, both
by using the word "skip", and by mentioning that the rest of
the sequence can be continued via "cherry-pick --continue"
(whether we skip or take the commit).
Noticed-by: Ramkumar Ramachandra <artagnon@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stress the difference between the two with a suggestion on
when the user should use one in place of the other.
Signed-off-by: Daniele Segato <daniele.segato@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --global section of git-config(1) currently reads like:
For writing options: write to global /.gitconfig file rather than the
^
start tilde
repository .git/config, write to $XDG_CONFIG_HOME/git/config file if
this file exists and the/.gitconfig file doesn’t.
^
end tilde
Instead of tilde (~) being interpreted literally, asciidoc subscripts
the text between the two tildes. To fix this problem, use backticks (`)
to quote all the paths in the file uniformly, just like config.txt does.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
See 390eb36 (upload-pack: optionally allow fetching from the tips of
hidden refs - 2013-01-28) for more information.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two (not identical) copies of error reporting when
attempting to remove submodules that have their repositories
embedded within them. Add a helper function so that we do not have
to repeat similar error messages with subtly different wording
without a good reason.
Noticed by Jiang Xin.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We mention twice that the from_ident field of struct
pretty_print_context is internal.
The first comment was added by 10f2fbf, which prepares the
struct for internal fields, and then the second by a908047,
which actually adds such a field. This was a mistake made
when re-rolling the series on the list; the comment should
have been removed from the latter commit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An enhanced "post-receive" hook to send e-mail messages.
* mh/multimail:
post-receive-email: deprecate script in favor of git-multimail
git-multimail: an improved replacement for post-receive-email
A helper to read from a set of format-patch output files or a range
of commits and find those who may have insights to the code that
the changes touch by running a series of "git blame" commands.
* es/contacts:
contrib: contacts: add documentation
contrib: contacts: add mailmap support
contrib: contacts: interpret committish akin to format-patch
contrib: contacts: add ability to parse from committish
contrib: add git-contacts helper
The tip one does _not_ revert c869753e (Force core.filemode to
false on Cygwin., 2006-12-30) on purpose, so that people can
still retain the old behaviour if they wanted to.
* ml/cygwin-updates:
cygwin: stop forcing core.filemode=false
Cygwin 1.7 supports mmap
Cygwin 1.7 has thread-safe pread
Cygwin 1.7 needs compat/regex
