Technically, "-s, --no-patch" is implemented in diff.c ("git diff
--no-patch" is essentially useless, but valid). From the user point of
view, this allows the documentation to show up in "git show --help",
which is one of the most useful use of the option.
While we're there, add a sentence explaining why the option can be
useful.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All options that trigger a patch output now override --no-patch.
The case of --binary deserves extra attention: the name may suggest that
it turns a normal patch into a binary patch, but it actually already
enables patch output when normally disabled (e.g. "git log --binary"
displays a patch), hence it makes sense for "git show --no-patch
--binary" to display the binary patch.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This follows the usual convention of having a --no-foo option to negate
--foo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to express "we do not care about deletions", we had to say
"--diff-filter=ACMRTXUB", giving all the possible change class
except for the one we do not want, "D".
This is cumbersome. As all the change classes are in uppercase,
allow their lowercase counterpart to selectively exclude the class
from the output. When such a negated change class is in the input,
start the filter option with the full bits set.
This would allow us to express the old "show-diff -q" with
"git diff-files --diff-filter=d".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to accept "git diff --diff-filter=Q" (note that there is no
such change class 'Q') silently and showed no output (because there
is no such change class 'Q').
Error out when such an input is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of running strchr() on the list of status characters over
and over again, parse the --diff-filter option into bitfields and
use the bits to see if the change to the filepair matches the status
requested.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore_apply_filter() checks if a filepair matches the filter
given with the "--diff-filter" option for each input filepairs with
a fairly complex expression in two places.
Create a helper function and call it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --diff-filter=<arg> option given by the user is kept as a
string, and passed to the underlying diffcore_apply_filter()
function as a string for each resulting path we run number of
strchr() to see if each class of change among ACDMRTXUB is meant to
be given.
Change the function signature to pass the whole diff_options, so
that we can pre-parse this string in the next patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All surrounding examples are typeset as monospaced text. Follow suit.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not having an open FD in the 0--2 range can lead to strange results,
for example, a subsequent open() may return 2 (stderr) and then a
die() would clobber this file.
git-daemon and git-shell already guarded against this, but apparently
users also manage to trip over it in other git commands. So we call
sanitize_stdfds() during main git startup.
Since these FDs are inherited, this covers all use of 'git foo ...',
and all internal C commands when called directly. It does not fix
shell/perl commands called directly.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both daemon.c and shell.c contain logic to open FDs 0/1/2 from
/dev/null if they are not already open. Move the function in daemon.c
to setup.c and use it in shell.c, too.
While there, remove a 'not' that inverted the meaning of the comment.
The point is indeed to *avoid* messing up.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test fails on Cygwin where the default system configuration does not
support case sensitivity (only case retention), so don't run the test on
such systems.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when an invalid revision is specified, the error message is:
fatal: Needed a single revision
This is misleading because, you might think there is something wrong
with the command line as a whole.
Now the user gets a more meaningful error message, showing the invalid
revision.
Signed-off-by: Dirk Wallenstein <halsmit@t-online.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add git-multimail, a tool for generating notification emails for
pushes to a Git repository. It is largely plug-in compatible with
post-receive-email, and is proposed to eventually replace that script.
The advantages of git-multimail relative to post-receive-email are
described in README.migrate-from-post-receive-email.
git-multimail is organized in a directory contrib/hooks/multimail.
The directory contains:
* git_multimail.py -- a Python module that can generate notification
emails for pushes to a Git repository. The file can be used
directly as a post-receive script (configured via git config
settings), or it can be imported as a Python module and configured
via arbitrary Python code.
* README -- user-level documentation for configuring and using
git-multimail.
* post-receive -- an example of building a post-receive script that
imports git_multimail.py as a Python module, with an example of how
to change the email templates.
* README.migrate-from-post-receive-email -- documentation targeted at
current users of post-receive-email, explaining the differences and
how to migrate a post-receive-email configuration to git-multimail.
* migrate-mailhook-config -- a script that can migrate a user's
post-receive-email configuration options to the equivalent
git-multimail options.
* README.Git -- a short explanation of the relationship between
git-multimail and the rest of the Git project, plus the exact date
and revision when this version was taken from the upstream project.
All but the last file are taken verbatim from the upstream
git-multimail project.
git-multimail is originally derived from post-receive-email and also
incorporates suggestions from the mailing list as well as patches by
the people listed below.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Ramkumar Ramachandra <artagnon@gmail.com>
Contributions-by: Chris Hiestand <chrishiestand@gmail.com>
Contributions-by: Michiel Holtkamp <git@elfstone.nl>
Contributions-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--literal-pathspecs and its equivalent environment variable are
probably used for scripting. In that setting, pathspec magic may be
unwanted. Disabling globbing in individual pathspec can be done via
:(literal) magic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix length is passed from one command to another via the new
magic 'prefix'. The magic is for parse_pathspec's internal use only,
not visible to parse_pathspec's callers.
Prefix length is not preserved across commands when --literal-pathspecs
is specified (no magic is allowed, including 'prefix'). That's OK
because we know all paths are literal. No magic, no special treatment
regarding prefix. (This may be no longer true if we make :(glob)
default)
Other options to preserve the prefix include saving it to env variable
or quoting. Env var way (at least _one_ env var) is not suitable
because the prefix is not the same for all pathspecs. Pathspecs
starting with "../" will eat into the prefix part.
We could also preserve 'prefix' across commands by quoting the prefix
part, then dequoting on receiving. But it may not be 100% accurate, we
may dequote longer than the original prefix part, for example. That
may be good or not, but it's not the purpose.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepending prefix to pathspec is a trick to workaround the fact that
commands can be executed in a subdirectory, but all git commands run
at worktree's root. The prefix part should always be treated as
literal string. Make it so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is essentially no-op. It helps catching new use of this
field though. This field is introduced as an intermediate step for the
pathspec conversion and will be removed eventually. At this stage no
more access sites should be introduced.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put a checkpoint to guard unsupported pathspec features in future.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_pathspec_depth was created to replace match_pathspec (see
61cf282 (pathspec: add match_pathspec_depth() - 2010-12-15). It took
more than two years, but the replacement finally happens :-)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, move free_pathspec() to pathspec.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code now takes advantage of nowildcard_len field.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This passes the pathspec, more or less unmodified, to
git-add--interactive. The command itself does not process pathspec. It
simply passes the pathspec to other builtin commands. So if all those
commands support pathspec, we're good.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ignore (at least the test suite) seems to rely on the pattern
order. PATHSPEC_KEEP_ORDER is introduced to explictly express this.
The lack of PATHSPEC_MAXDEPTH_VALID is sufficient because it's the
only flag that reorders pathspecs, but it's less obvious that way.
Cc: Adam Spiers <git@adamspiers.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GUARD_PATHSPEC() marks pathspec-sensitive code, basically all those
that touch anything in 'struct pathspec' except fields "nr" and
"original". GUARD_PATHSPEC() is not supposed to fail. It's mainly to
help the designers catch unsupported codepaths.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
