While explicitly stating that the commit message in a prerequisite
line is optional, we required all lines with 40 or more characters
to contain a space after the object name, bailing out if a line
consisted of an object name only. This was to allow bundling a
history to a commit without an message, but the code forgot that it
already called rtrim() to remove that whitespace.
As a workaround, only check for SP when the line has more than 40
characters.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of test cases and a corner case bugfix for "git rm".
* jk/rm-removed-paths:
t3600: document failure of rm across symbolic links
t3600: test behavior of reverse-d/f conflict
rm: do not complain about d/f conflicts during deletion
* fc/remote-helpers-test-updates:
remote-hg: fix hg-git test-case
remote-bzr: remove stale check code for tests
remote-helpers: fix the run of all tests
remote-bzr: avoid echo -n
Strip @anchor elements in the texinfo output of the documentation,
as a single document created by concatenating our entire manual set
will produce many duplicates that makes newer texinfo unhappy.
* mg/texinfo-5:
Documentation: Strip texinfo anchors to avoid duplicates
Support "pull from one place, push to another place" workflow
better by introducing remote.pushdefault (overrides the "origin"
thing) and branch.*.pushremote (overrides the branch.*.remote).
* rr/triangle:
remote.c: introduce branch.<name>.pushremote
remote.c: introduce remote.pushdefault
remote.c: introduce a way to have different remotes for fetch/push
t5516 (fetch-push): drop implicit arguments from helper functions
t5516 (fetch-push): update test description
remote.c: simplify a bit of code using git_config_string()
"git status" learned to report that you are in the middle of a
revert session, just like it does for a cherry-pick and a bisect
session.
* mm/status-during-revert:
status: show commit sha1 in "You are currently reverting" message
status: show 'revert' state and status hint
The handing by "git branch --set-upstream-to" against various forms
of errorneous inputs were suboptimal.
* jk/set-upstream-error-cases:
branch: give advice when tracking start-point is missing
branch: mention start_name in set-upstream error messages
branch: improve error message for missing --set-upstream-to ref
branch: factor out "upstream is not a branch" error messages
t3200: test --set-upstream-to with bogus refs
When used with "-d temporary-directory" option, "git filter-branch"
failed to come back to the original working tree to perform the
final clean-up procedure.
* jk/filter-branch-come-back-to-original:
filter-branch: return to original dir after filtering
Now that the cover-letter code has been shuffled, we can do some
cleanups.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, add a new option: 'auto', so if there's more than one patch, the
cover letter is generated, otherwise it's not.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_BOOLEAN is deprecated, and this is what we want.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By moving the part that relies on rev->pending earlier, where we are
already checking the special case where there's only one ref.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we do it after the revision traversal we can be sure that this is
indeed a commit that will be processed (i.e. not a merge) and it's the
top most one (thus removing the NEEDSWORK comment, at least we show the
same as 'git diff --stat' output that appears in the cover-letter).
While we are at it, since we know there's nothing to generate, exit
sooner in all cases, like --cover-letter currently does.
Also, if there's nothing to generate and cover-letter is specified, a
different code-path might be triggered that is not currently covered in
the test-case, so add a test for it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit eff80a9 (Allow custom "comment char") introduced a custom
comment character for commit messages but didn't use it completely
in the tag signature part.
This commit fixes that.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit eff80a9 (Allow custom "comment char") introduced a custom
comment character for commit messages but forgot to use it in
people credits which can be a part of a commit message.
With this commit, the custom comment character is also used
in people credits.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pattern "dir" (without trailing slash) in the attributes file
stopped matching a directory "dir" by mistake with an earlier change
that wanted to allow pattern "dir/" to also match.
* jc/directory-attrs-regression-fix:
t: check that a pattern without trailing slash matches a directory
dir.c::match_pathname(): pay attention to the length of string parameters
dir.c::match_pathname(): adjust patternlen when shifting pattern
dir.c::match_basename(): pay attention to the length of string parameters
attr.c::path_matches(): special case paths that end with a slash
attr.c::path_matches(): the basename is part of the pathname
Using grep "devel\s\+3:" to find at least one whitspace is not
portable on all grep versions; not all grep versions understand "\s"
as a "whitespace".
Use a literal TAB followed by SPACE.
The + as a qualifier for "one or more" is not a basic regular
expression; use egrep instead of grep.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people always do --annotate, lets not force them to always type
that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation says that "If no 'refspec' capability is advertised,
there is an implied `refspec *:*`" but this is only the case for the
"import" command.
Since there is a comment in transport-helper.c indicating that this
default is for historical reasons, change the documentation to clarify
that a refspec should always be specified.
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-export can fail because of some pruned-reference when importing a
mark file.
The problem happens in the following scenario:
$ git fast-export --export-marks=MARKS master
(rewrite master)
$ git prune
$ git fast-export --import-marks=MARKS master
This might fail if some references have been removed by prune
because some marks will refer to no longer existing commits.
git-fast-export will not need these objects anyway as they were no
longer reachable.
We still need to update last_numid so we don't change the mapping
between marks and objects for remote-helpers.
Unfortunately, the mark file should not be rewritten without lost marks
if no new objects has been exported, as we could lose track of the last
last_numid.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They have no content, there's nothing we can do with them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently, that's the only way it's possible.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow re-add of a deleted file in the same commit.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git does not handle directories, renaming a directory is renaming every
files in this directory.
[fc: added tests]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we generate relative names (e.g., "master~20^2"), we
format the name into a static buffer, then xstrdup the
result to attach it to the commit. Since the first thing we
add into the static buffer is the already-computed name of
the child commit, the names may get longer and longer as
the traversal gets deeper, and we may eventually overflow
the fixed-size buffer.
Fix this by converting the fixed-size buffer into a dynamic
strbuf. The performance implications should be minimal, as
we end up allocating a heap copy of the name anyway (and now
we can just detach the heap copy from the strbuf).
Reported-by: Eric Roman <eroman@chromium.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is a single-liner and is only called from one
place. Just inline it, which makes the code more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we encounter an unknown http error (e.g., a 403), we
hand the error code to http_error, which then prints it with
error(). After that we die with the redundant message "HTTP
request failed".
Instead, let's just drop http_error entirely, which does
nothing but pass arguments to error(), and instead die
directly with a useful message.
So before:
$ git clone https://example.com/repo.git
Cloning into 'repo'...
error: unable to access 'https://example.com/repo.git': The requested URL returned error: 403 Forbidden
fatal: HTTP request failed
and after:
$ git clone https://example.com/repo.git
Cloning into 'repo'...
fatal: unable to access 'https://example.com/repo.git': The requested URL returned error: 403 Forbidden
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we report an http error code, we say something like:
error: The requested URL reported failure: 403 Forbidden while accessing http://example.com/repo.git
Everything between "error:" and "while" is written by curl,
and the resulting sentence is hard to read (especially
because there is no punctuation between curl's sentence and
the remainder of ours). Instead, let's re-order this to give
better flow:
error: unable to access 'http://example.com/repo.git: The requested URL reported failure: 403 Forbidden
This is still annoyingly long, but at least reads more
clearly left to right.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helper function should really be a one-liner that
prints an error message, but it has ended up unnecessarily
complicated:
1. We call error() directly when we fail to start the curl
request, so we must later avoid printing a duplicate
error in http_error().
It would be much simpler in this case to just stuff the
error message into our usual curl_errorstr buffer
rather than printing it ourselves. This means that
http_error does not even have to care about curl's exit
value (the interesting part is in the errorstr buffer
already).
2. We return the "ret" value passed in to us, but none of
the callers actually cares about our return value. We
can just drop this entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we report http errors in fetching the initial ref
advertisement, we show the full URL we attempted to use,
including "info/refs?service=git-upload-pack". While this
may be useful for debugging a broken server, it is
unnecessarily verbose and confusing for most cases, in which
the client user is not even the same person as the owner of
the repository.
Let's just show the repository URL; debugging can happen
with GIT_CURL_VERBOSE, which shows way more useful
information, anyway.
At the same time, let's also make sure to mention the
repository URL when we report failed authentication
(previously we said only "Authentication failed"). Knowing
the URL can help the user realize why authentication failed
(e.g., they meant to push to remote A, not remote B).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get an http 404 trying to get the initial list of
refs from the server, we try to be helpful and remind the
user that update-server-info may need to be run. This looks
like:
$ git clone https://github.com/non/existent
Cloning into 'existent'...
fatal: https://github.com/non/existent/info/refs?service=git-upload-pack not found: did you run git update-server-info on the server?
Suggesting update-server-info may be a good suggestion for
users who are in control of the server repo and who are
planning to set up dumb http. But for users of smart http,
and especially users who are not in control of the server
repo, the advice is useless and confusing.
Since most people are expected to use smart http these days,
it does not make sense to keep the update-server-info hint.
We not only drop the mention of update-server-info, but also
show only the main repo URL, not the full "info/refs" and
service parameter. These elements may be useful for
debugging a broken server configuration, but in the majority
of cases, users are not fetching from their own
repositories, but rather from other people's repositories;
they have neither the power nor interest to fix a broken
configuration, and the extra components just make the
message more confusing. Users who do want to debug can and
should use GIT_CURL_VERBOSE to get more complete information
on the actual URLs visited.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get an http 404 trying to get the initial list of
refs from the server, we try to be helpful and remind the
user that update-server-info may need to be run. This looks
like:
$ git clone https://github.com/non/existent
Cloning into 'existent'...
fatal: https://github.com/non/existent/info/refs?service=git-upload-pack not found: did you run git update-server-info on the server?
Suggesting update-server-info may be a good suggestion for
users who are in control of the server repo and who are
planning to set up dumb http. But for users of smart http,
and especially users who are not in control of the server
repo, the advice is useless and confusing.
The previous patch taught remote-curl to show custom advice
from the server when it is available. When we have shown
messages from the server, we can also drop our custom
advice; what the server has to say is likely to be more
accurate and helpful.
We not only drop the mention of update-server-info, but also
show only the main repo URL, not the full "info/refs" and
service parameter. These elements may be useful for
debugging a broken server configuration, but again, anything
the server has provided is likely to be more useful (and one
can still use GIT_CURL_VERBOSE to get much more complete
debugging information).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an http request to a remote git server fails, we show
only the http response code, or sometimes a custom message
for particular codes. This gives the server no opportunity
to offer a more detailed explanation of the reason for the
failure, or to give extra advice.
This patch teaches remote-curl to record and display the
body content of a failed http response. We only display such
responses when the content-type is advertised as text/plain,
as it is the most likely to look presentable on the user's
terminal (and it is hoped to be a good indication that the
message is intended for git clients, and not for a web
browser).
Each line of the new output is prepended with "remote:".
Example output may look like this (assuming the server is
configured to display such a helpful message):
$ GIT_SMART_HTTP=0 git clone https://example.com/some/repo.git
Cloning into 'repo'...
remote: Sorry, fetching via dumb http is forbidden.
remote: Please upgrade your git client to v1.6.6 or greater
remote: and make sure that smart-http is enabled.
error: The requested URL returned error: 403 while accessing http://localhost:5001/some/repo.git/info/refs
fatal: HTTP request failed
For the sake of simplicity, we only record and display these
errors during the initial fetch of the ref list, as that is
the initial contact with the server and where the most
common, interesting errors happen (and there is already
precedent, as that is the only place we currently massage
http error codes into more helpful messages).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently set curl's FAILONERROR option, which means that
any http failures are reported as curl errors, and the
http body content from the server is thrown away.
This patch introduces a new option to http_get_strbuf which
specifies that the body content from a failed http response
should be placed in the destination strbuf, where it can be
accessed by the caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "merge/pull" to optionally verify and reject commits that are
not signed properly.
* sg/gpg-sig:
pretty printing: extend %G? to include 'N' and 'U'
merge/pull Check for untrusted good GPG signatures
merge/pull: verify GPG signatures of commits being merged
commit.c/GPG signature verification: Also look at the first GPG status line
Move commit GPG signature verification to commit.c
Update "git send-email" for issues noticed by PerlCritic.
* rr/send-email-perl-critique:
send-email: use the three-arg form of open in recipients_cmd
send-email: drop misleading function prototype
send-email: use "return;" not "return undef;" on error codepaths
