git-rev-parse(1) ================ NAME ---- git-rev-parse - Pick out and massage parameters SYNOPSIS -------- [verse] 'git rev-parse' [ --option ] ... DESCRIPTION ----------- Many Git porcelainish commands take mixture of flags (i.e. parameters that begin with a dash '-') and parameters meant for the underlying 'git rev-list' command they use internally and flags and parameters for the other commands they use downstream of 'git rev-list'. This command is used to distinguish between them. OPTIONS ------- Operation Modes ~~~~~~~~~~~~~~~ Each of these options must appear first on the command line. --parseopt:: Use 'git rev-parse' in option parsing mode (see PARSEOPT section below). --sq-quote:: Use 'git rev-parse' in shell quoting mode (see SQ-QUOTE section below). In contrast to the `--sq` option below, this mode does only quoting. Nothing else is done to command input. Options for --parseopt ~~~~~~~~~~~~~~~~~~~~~~ --keep-dashdash:: Only meaningful in `--parseopt` mode. Tells the option parser to echo out the first `--` met instead of skipping it. --stop-at-non-option:: Only meaningful in `--parseopt` mode. Lets the option parser stop at the first non-option argument. This can be used to parse sub-commands that take options themselves. --stuck-long:: Only meaningful in `--parseopt` mode. Output the options in their long form if available, and with their arguments stuck. Options for Filtering ~~~~~~~~~~~~~~~~~~~~~ --revs-only:: Do not output flags and parameters not meant for 'git rev-list' command. --no-revs:: Do not output flags and parameters meant for 'git rev-list' command. --flags:: Do not output non-flag parameters. --no-flags:: Do not output flag parameters. Options for Output ~~~~~~~~~~~~~~~~~~ --default :: If there is no parameter given by the user, use `` instead. --prefix :: Behave as if 'git rev-parse' was invoked from the `` subdirectory of the working tree. Any relative filenames are resolved as if they are prefixed by `` and will be printed in that form. + This can be used to convert arguments to a command run in a subdirectory so that they can still be used after moving to the top-level of the repository. For example: + ---- prefix=$(git rev-parse --show-prefix) cd "$(git rev-parse --show-toplevel)" eval "set -- $(git rev-parse --sq --prefix "$prefix" "$@")" ---- --verify:: Verify that exactly one parameter is provided, and that it can be turned into a raw 20-byte SHA-1 that can be used to access the object database. If so, emit it to the standard output; otherwise, error out. + If you want to make sure that the output actually names an object in your object database and/or can be used as a specific type of object you require, you can add "^{type}" peeling operator to the parameter. For example, `git rev-parse "$VAR^{commit}"` will make sure `$VAR` names an existing object that is a commit-ish (i.e. a commit, or an annotated tag that points at a commit). To make sure that `$VAR` names an existing object of any type, `git rev-parse "$VAR^{object}"` can be used. -q:: --quiet:: Only meaningful in `--verify` mode. Do not output an error message if the first argument is not a valid object name; instead exit with non-zero status silently. --sq:: Usually the output is made one line per flag and parameter. This option makes output a single line, properly quoted for consumption by shell. Useful when you expect your parameter to contain whitespaces and newlines (e.g. when using pickaxe `-S` with 'git diff-{asterisk}'). In contrast to the `--sq-quote` option, the command input is still interpreted as usual. --not:: When showing object names, prefix them with '{caret}' and strip '{caret}' prefix from the object names that already have one. --abbrev-ref[=(strict|loose)]:: A non-ambiguous short name of the objects name. The option core.warnAmbiguousRefs is used to select the strict abbreviation mode. --short:: --short=number:: Instead of outputting the full SHA-1 values of object names try to abbreviate them to a shorter unique name. When no length is specified 7 is used. The minimum length is 4. --symbolic:: Usually the object names are output in SHA-1 form (with possible '{caret}' prefix); this option makes them output in a form as close to the original input as possible. --symbolic-full-name:: This is similar to \--symbolic, but it omits input that are not refs (i.e. branch or tag names; or more explicitly disambiguating "heads/master" form, when you want to name the "master" branch when there is an unfortunately named tag "master"), and show them as full refnames (e.g. "refs/heads/master"). Options for Objects ~~~~~~~~~~~~~~~~~~~ --all:: Show all refs found in `refs/`. --branches[=pattern]:: --tags[=pattern]:: --remotes[=pattern]:: Show all branches, tags, or remote-tracking branches, respectively (i.e., refs found in `refs/heads`, `refs/tags`, or `refs/remotes`, respectively). + If a `pattern` is given, only refs matching the given shell glob are shown. If the pattern does not contain a globbing character (`?`, `*`, or `[`), it is turned into a prefix match by appending `/*`. --glob=pattern:: Show all refs matching the shell glob pattern `pattern`. If the pattern does not start with `refs/`, this is automatically prepended. If the pattern does not contain a globbing character (`?`, `*`, or `[`), it is turned into a prefix match by appending `/*`. --exclude=:: Do not include refs matching '' that the next `--all`, `--branches`, `--tags`, `--remotes`, or `--glob` would otherwise consider. Repetitions of this option accumulate exclusion patterns up to the next `--all`, `--branches`, `--tags`, `--remotes`, or `--glob` option (other options or arguments do not clear accumlated patterns). + The patterns given should not begin with `refs/heads`, `refs/tags`, or `refs/remotes` when applied to `--branches`, `--tags`, or `--remotes`, respectively, and they must begin with `refs/` when applied to `--glob` or `--all`. If a trailing '/{asterisk}' is intended, it must be given explicitly. --disambiguate=:: Show every object whose name begins with the given prefix. The must be at least 4 hexadecimal digits long to avoid listing each and every object in the repository by mistake. Options for Files ~~~~~~~~~~~~~~~~~ --local-env-vars:: List the GIT_* environment variables that are local to the repository (e.g. GIT_DIR or GIT_WORK_TREE, but not GIT_EDITOR). Only the names of the variables are listed, not their value, even if they are set. --git-dir:: Show `$GIT_DIR` if defined. Otherwise show the path to the .git directory. The path shown, when relative, is relative to the current working directory. + If `$GIT_DIR` is not defined and the current directory is not detected to lie in a Git repository or work tree print a message to stderr and exit with nonzero status. --is-inside-git-dir:: When the current working directory is below the repository directory print "true", otherwise "false". --is-inside-work-tree:: When the current working directory is inside the work tree of the repository print "true", otherwise "false". --is-bare-repository:: When the repository is bare print "true", otherwise "false". --resolve-git-dir :: Check if is a valid repository or a gitfile that points at a valid repository, and print the location of the repository. If is a gitfile then the resolved path to the real repository is printed. --show-cdup:: When the command is invoked from a subdirectory, show the path of the top-level directory relative to the current directory (typically a sequence of "../", or an empty string). --show-prefix:: When the command is invoked from a subdirectory, show the path of the current directory relative to the top-level directory. --show-toplevel:: Show the absolute path of the top-level directory. --shared-index-path:: Show the path to the shared index file in split index mode, or empty if not in split-index mode. Other Options ~~~~~~~~~~~~~ --since=datestring:: --after=datestring:: Parse the date string, and output the corresponding --max-age= parameter for 'git rev-list'. --until=datestring:: --before=datestring:: Parse the date string, and output the corresponding --min-age= parameter for 'git rev-list'. ...:: Flags and parameters to be parsed. include::revisions.txt[] PARSEOPT -------- In `--parseopt` mode, 'git rev-parse' helps massaging options to bring to shell scripts the same facilities C builtins have. It works as an option normalizer (e.g. splits single switches aggregate values), a bit like `getopt(1)` does. It takes on the standard input the specification of the options to parse and understand, and echoes on the standard output a string suitable for `sh(1)` `eval` to replace the arguments with normalized ones. In case of error, it outputs usage on the standard error stream, and exits with code 129. Note: Make sure you quote the result when passing it to `eval`. See below for an example. Input Format ~~~~~~~~~~~~ 'git rev-parse --parseopt' input format is fully text based. It has two parts, separated by a line that contains only `--`. The lines before the separator (should be one or more) are used for the usage. The lines after the separator describe the options. Each line of options has this format: ------------ *? SP+ help LF ------------ ``:: its format is the short option character, then the long option name separated by a comma. Both parts are not required, though at least one is necessary. `h,help`, `dry-run` and `f` are all three correct ``. ``:: `` are of `*`, `=`, `?` or `!`. * Use `=` if the option takes an argument. * Use `?` to mean that the option takes an optional argument. You probably want to use the `--stuck-long` mode to be able to unambiguously parse the optional argument. * Use `*` to mean that this option should not be listed in the usage generated for the `-h` argument. It's shown for `--help-all` as documented in linkgit:gitcli[7]. * Use `!` to not make the corresponding negated long option available. ``:: ``, if specified, is used as a name of the argument in the help output, for options that take arguments. `` is terminated by the first whitespace. It is customary to use a dash to separate words in a multi-word argument hint. The remainder of the line, after stripping the spaces, is used as the help associated to the option. Blank lines are ignored, and lines that don't match this specification are used as option group headers (start the line with a space to create such lines on purpose). Example ~~~~~~~ ------------ OPTS_SPEC="\ some-command [options] ... some-command does foo and bar! -- h,help show the help foo some nifty option --foo bar= some cool option --bar with an argument baz=arg another cool option --baz with a named argument qux?path qux may take a path argument but has meaning by itself An option group Header C? option C with an optional argument" eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)" ------------ Usage text ~~~~~~~~~~ When `"$@"` is `-h` or `--help` in the above example, the following usage text would be shown: ------------ usage: some-command [options] ... some-command does foo and bar! -h, --help show the help --foo some nifty option --foo --bar ... some cool option --bar with an argument --baz another cool option --baz with a named argument --qux[=] qux may take a path argument but has meaning by itself An option group Header -C[...] option C with an optional argument ------------ SQ-QUOTE -------- In `--sq-quote` mode, 'git rev-parse' echoes on the standard output a single line suitable for `sh(1)` `eval`. This line is made by normalizing the arguments following `--sq-quote`. Nothing other than quoting the arguments is done. If you want command input to still be interpreted as usual by 'git rev-parse' before the output is shell quoted, see the `--sq` option. Example ~~~~~~~ ------------ $ cat >your-git-script.sh <<\EOF #!/bin/sh args=$(git rev-parse --sq-quote "$@") # quote user-supplied arguments command="git frotz -n24 $args" # and use it inside a handcrafted # command line eval "$command" EOF $ sh your-git-script.sh "a b'c" ------------ EXAMPLES -------- * Print the object name of the current commit: + ------------ $ git rev-parse --verify HEAD ------------ * Print the commit object name from the revision in the $REV shell variable: + ------------ $ git rev-parse --verify $REV^{commit} ------------ + This will error out if $REV is empty or not a valid revision. * Similar to above: + ------------ $ git rev-parse --default master --verify $REV ------------ + but if $REV is empty, the commit object name from master will be printed. GIT --- Part of the linkgit:git[1] suite