1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-11-16 06:03:44 +01:00
git/t/lib-submodule-update.sh
Jens Lehmann da7fe3fb6d stash: add t3906 for submodule updates
Test that the stash apply command updates the work tree as expected for
changes which don't result in conflicts. To make that work add a helper
function that uses read-tree to apply the changes of the target commit
to the work tree, then stashes these changes and at last applies that
stash.

Implement the KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES switch
and reuse two other already present switches to expect the known
failure that stash does ignore submodule changes.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-14 12:06:16 -07:00

680 lines
23 KiB
Bash
Executable file

# Create a submodule layout used for all tests below.
#
# The following use cases are covered:
# - New submodule (no_submodule => add_sub1)
# - Removed submodule (add_sub1 => remove_sub1)
# - Updated submodule (add_sub1 => modify_sub1)
# - Submodule updated to invalid commit (add_sub1 => invalid_sub1)
# - Submodule updated from invalid commit (invalid_sub1 => valid_sub1)
# - Submodule replaced by tracked files in directory (add_sub1 =>
# replace_sub1_with_directory)
# - Directory containing tracked files replaced by submodule
# (replace_sub1_with_directory => replace_directory_with_sub1)
# - Submodule replaced by tracked file with the same name (add_sub1 =>
# replace_sub1_with_file)
# - Tracked file replaced by submodule (replace_sub1_with_file =>
# replace_file_with_sub1)
#
# --O-----O
# / ^ replace_directory_with_sub1
# / replace_sub1_with_directory
# /----O
# / ^
# / modify_sub1
# O------O-------O
# ^ ^\ ^
# | | \ remove_sub1
# | | -----O-----O
# | | \ ^ replace_file_with_sub1
# | | \ replace_sub1_with_file
# | add_sub1 --O-----O
# no_submodule ^ valid_sub1
# invalid_sub1
#
create_lib_submodule_repo () {
git init submodule_update_repo &&
(
cd submodule_update_repo &&
echo "expect" >>.gitignore &&
echo "actual" >>.gitignore &&
echo "x" >file1 &&
echo "y" >file2 &&
git add .gitignore file1 file2 &&
git commit -m "Base" &&
git branch "no_submodule" &&
git checkout -b "add_sub1" &&
git submodule add ./. sub1 &&
git config -f .gitmodules submodule.sub1.ignore all &&
git config submodule.sub1.ignore all &&
git add .gitmodules &&
git commit -m "Add sub1" &&
git checkout -b remove_sub1 &&
git revert HEAD &&
git checkout -b "modify_sub1" "add_sub1" &&
git submodule update &&
(
cd sub1 &&
git fetch &&
git checkout -b "modifications" &&
echo "z" >file2 &&
echo "x" >file3 &&
git add file2 file3 &&
git commit -m "modified file2 and added file3" &&
git push origin modifications
) &&
git add sub1 &&
git commit -m "Modify sub1" &&
git checkout -b "replace_sub1_with_directory" "add_sub1" &&
git submodule update &&
(
cd sub1 &&
git checkout modifications
) &&
git rm --cached sub1 &&
rm sub1/.git* &&
git config -f .gitmodules --remove-section "submodule.sub1" &&
git add .gitmodules sub1/* &&
git commit -m "Replace sub1 with directory" &&
git checkout -b replace_directory_with_sub1 &&
git revert HEAD &&
git checkout -b "replace_sub1_with_file" "add_sub1" &&
git rm sub1 &&
echo "content" >sub1 &&
git add sub1 &&
git commit -m "Replace sub1 with file" &&
git checkout -b replace_file_with_sub1 &&
git revert HEAD &&
git checkout -b "invalid_sub1" "add_sub1" &&
git update-index --cacheinfo 160000 0123456789012345678901234567890123456789 sub1 &&
git commit -m "Invalid sub1 commit" &&
git checkout -b valid_sub1 &&
git revert HEAD &&
git checkout master
)
}
# Helper function to replace gitfile with .git directory
replace_gitfile_with_git_dir () {
(
cd "$1" &&
git_dir="$(git rev-parse --git-dir)" &&
rm -f .git &&
cp -R "$git_dir" .git &&
GIT_WORK_TREE=. git config --unset core.worktree
)
}
# Test that the .git directory in the submodule is unchanged (except for the
# core.worktree setting, which appears only in $GIT_DIR/modules/$1/config).
# Call this function before test_submodule_content as the latter might
# write the index file leading to false positive index differences.
#
# Note that this only supports submodules at the root level of the
# superproject, with the default name, i.e. same as its path.
test_git_directory_is_unchanged () {
(
cd ".git/modules/$1" &&
# does core.worktree point at the right place?
test "$(git config core.worktree)" = "../../../$1" &&
# remove it temporarily before comparing, as
# "$1/.git/config" lacks it...
git config --unset core.worktree
) &&
diff -r ".git/modules/$1" "$1/.git" &&
(
# ... and then restore.
cd ".git/modules/$1" &&
git config core.worktree "../../../$1"
)
}
# Helper function to be executed at the start of every test below, it sets up
# the submodule repo if it doesn't exist and configures the most problematic
# settings for diff.ignoreSubmodules.
prolog () {
(test -d submodule_update_repo || create_lib_submodule_repo) &&
test_config_global diff.ignoreSubmodules all &&
test_config diff.ignoreSubmodules all
}
# Helper function to bring work tree back into the state given by the
# commit. This includes trying to populate sub1 accordingly if it exists and
# should be updated to an existing commit.
reset_work_tree_to () {
rm -rf submodule_update &&
git clone submodule_update_repo submodule_update &&
(
cd submodule_update &&
rm -rf sub1 &&
git checkout -f "$1" &&
git status -u -s >actual &&
test_must_be_empty actual &&
sha1=$(git rev-parse --revs-only HEAD:sub1) &&
if test -n "$sha1" &&
test $(cd "sub1" && git rev-parse --verify "$sha1^{commit}")
then
git submodule update --init --recursive "sub1"
fi
)
}
# Test that the superproject contains the content according to commit "$1"
# (the work tree must match the index for everything but submodules but the
# index must exactly match the given commit including any submodule SHA-1s).
test_superproject_content () {
git diff-index --cached "$1" >actual &&
test_must_be_empty actual &&
git diff-files --ignore-submodules >actual &&
test_must_be_empty actual
}
# Test that the given submodule at path "$1" contains the content according
# to the submodule commit recorded in the superproject's commit "$2"
test_submodule_content () {
if test $# != 2
then
echo "test_submodule_content needs two arguments"
return 1
fi &&
submodule="$1" &&
commit="$2" &&
test -d "$submodule"/ &&
if ! test -f "$submodule"/.git && ! test -d "$submodule"/.git
then
echo "Submodule $submodule is not populated"
return 1
fi &&
sha1=$(git rev-parse --verify "$commit:$submodule") &&
if test -z "$sha1"
then
echo "Couldn't retrieve SHA-1 of $submodule for $commit"
return 1
fi &&
(
cd "$submodule" &&
git status -u -s >actual &&
test_must_be_empty actual &&
git diff "$sha1" >actual &&
test_must_be_empty actual
)
}
# Test that the following transitions are correctly handled:
# - Updated submodule
# - New submodule
# - Removed submodule
# - Directory containing tracked files replaced by submodule
# - Submodule replaced by tracked files in directory
# - Submodule replaced by tracked file with the same name
# - tracked file replaced by submodule
#
# The default is that submodule contents aren't changed until "git submodule
# update" is run. And even then that command doesn't delete the work tree of
# a removed submodule.
#
# Removing a submodule containing a .git directory must fail even when forced
# to protect the history!
#
# Test that submodule contents are currently not updated when switching
# between commits that change a submodule.
test_submodule_switch () {
command="$1"
######################### Appearing submodule #########################
# Switching to a commit letting a submodule appear creates empty dir ...
if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1
then
# Restoring stash fails to restore submodule index entry
RESULT="failure"
else
RESULT="success"
fi
test_expect_$RESULT "$command: added submodule creates empty directory" '
prolog &&
reset_work_tree_to no_submodule &&
(
cd submodule_update &&
git branch -t add_sub1 origin/add_sub1 &&
$command add_sub1 &&
test_superproject_content origin/add_sub1 &&
test_dir_is_empty sub1 &&
git submodule update --init --recursive &&
test_submodule_content sub1 origin/add_sub1
)
'
# ... and doesn't care if it already exists ...
test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" '
prolog &&
reset_work_tree_to no_submodule &&
(
cd submodule_update &&
mkdir sub1 &&
git branch -t add_sub1 origin/add_sub1 &&
$command add_sub1 &&
test_superproject_content origin/add_sub1 &&
test_dir_is_empty sub1 &&
git submodule update --init --recursive &&
test_submodule_content sub1 origin/add_sub1
)
'
# ... unless there is an untracked file in its place.
test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" '
prolog &&
reset_work_tree_to no_submodule &&
(
cd submodule_update &&
git branch -t add_sub1 origin/add_sub1 &&
>sub1 &&
test_must_fail $command add_sub1 &&
test_superproject_content origin/no_submodule &&
test_must_be_empty sub1
)
'
# Replacing a tracked file with a submodule produces an empty
# directory ...
test_expect_$RESULT "$command: replace tracked file with submodule creates empty directory" '
prolog &&
reset_work_tree_to replace_sub1_with_file &&
(
cd submodule_update &&
git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
$command replace_file_with_sub1 &&
test_superproject_content origin/replace_file_with_sub1 &&
test_dir_is_empty sub1 &&
git submodule update --init --recursive &&
test_submodule_content sub1 origin/replace_file_with_sub1
)
'
# ... as does removing a directory with tracked files with a
# submodule.
if test "$KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR" = 1
then
# Non fast-forward merges fail with "Directory sub1 doesn't
# exist. sub1" because the empty submodule directory is not
# created
RESULT="failure"
else
RESULT="success"
fi
test_expect_$RESULT "$command: replace directory with submodule" '
prolog &&
reset_work_tree_to replace_sub1_with_directory &&
(
cd submodule_update &&
git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
$command replace_directory_with_sub1 &&
test_superproject_content origin/replace_directory_with_sub1 &&
test_dir_is_empty sub1 &&
git submodule update --init --recursive &&
test_submodule_content sub1 origin/replace_directory_with_sub1
)
'
######################## Disappearing submodule #######################
# Removing a submodule doesn't remove its work tree ...
if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1
then
RESULT="failure"
else
RESULT="success"
fi
test_expect_$RESULT "$command: removed submodule leaves submodule directory and its contents in place" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t remove_sub1 origin/remove_sub1 &&
$command remove_sub1 &&
test_superproject_content origin/remove_sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
# ... especially when it contains a .git directory.
test_expect_$RESULT "$command: removed submodule leaves submodule containing a .git directory alone" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t remove_sub1 origin/remove_sub1 &&
replace_gitfile_with_git_dir sub1 &&
$command remove_sub1 &&
test_superproject_content origin/remove_sub1 &&
test_git_directory_is_unchanged sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
# Replacing a submodule with files in a directory must fail as the
# submodule work tree isn't removed ...
if test "$KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES" = 1
then
# Non fast-forward merges attempt to merge the former
# submodule files with the newly checked out ones in the
# directory of the same name while it shouldn't.
RESULT="failure"
else
RESULT="success"
fi
test_expect_$RESULT "$command: replace submodule with a directory must fail" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
test_must_fail $command replace_sub1_with_directory &&
test_superproject_content origin/add_sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
# ... especially when it contains a .git directory.
test_expect_$RESULT "$command: replace submodule containing a .git directory with a directory must fail" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
replace_gitfile_with_git_dir sub1 &&
test_must_fail $command replace_sub1_with_directory &&
test_superproject_content origin/add_sub1 &&
test_git_directory_is_unchanged sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
# Replacing it with a file must fail as it could throw away any local
# work tree changes ...
test_expect_failure "$command: replace submodule with a file must fail" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
test_must_fail $command replace_sub1_with_file &&
test_superproject_content origin/add_sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
# ... or even destroy unpushed parts of submodule history if that
# still uses a .git directory.
test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
replace_gitfile_with_git_dir sub1 &&
test_must_fail $command replace_sub1_with_file &&
test_superproject_content origin/add_sub1 &&
test_git_directory_is_unchanged sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
########################## Modified submodule #########################
# Updating a submodule sha1 doesn't update the submodule's work tree
if test "$KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT" = 1
then
# When cherry picking a SHA-1 update for an ignored submodule
# the commit incorrectly fails with "The previous cherry-pick
# is now empty, possibly due to conflict resolution."
RESULT="failure"
else
RESULT="success"
fi
test_expect_$RESULT "$command: modified submodule does not update submodule work tree" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t modify_sub1 origin/modify_sub1 &&
$command modify_sub1 &&
test_superproject_content origin/modify_sub1 &&
test_submodule_content sub1 origin/add_sub1 &&
git submodule update &&
test_submodule_content sub1 origin/modify_sub1
)
'
# Updating a submodule to an invalid sha1 doesn't update the
# submodule's work tree, subsequent update will fail
test_expect_$RESULT "$command: modified submodule does not update submodule work tree to invalid commit" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t invalid_sub1 origin/invalid_sub1 &&
$command invalid_sub1 &&
test_superproject_content origin/invalid_sub1 &&
test_submodule_content sub1 origin/add_sub1 &&
test_must_fail git submodule update &&
test_submodule_content sub1 origin/add_sub1
)
'
# Updating a submodule from an invalid sha1 doesn't update the
# submodule's work tree, subsequent update will succeed
test_expect_$RESULT "$command: modified submodule does not update submodule work tree from invalid commit" '
prolog &&
reset_work_tree_to invalid_sub1 &&
(
cd submodule_update &&
git branch -t valid_sub1 origin/valid_sub1 &&
$command valid_sub1 &&
test_superproject_content origin/valid_sub1 &&
test_dir_is_empty sub1 &&
git submodule update --init --recursive &&
test_submodule_content sub1 origin/valid_sub1
)
'
}
# Test that submodule contents are currently not updated when switching
# between commits that change a submodule, but throwing away local changes in
# the superproject is allowed.
test_submodule_forced_switch () {
command="$1"
######################### Appearing submodule #########################
# Switching to a commit letting a submodule appear creates empty dir ...
test_expect_success "$command: added submodule creates empty directory" '
prolog &&
reset_work_tree_to no_submodule &&
(
cd submodule_update &&
git branch -t add_sub1 origin/add_sub1 &&
$command add_sub1 &&
test_superproject_content origin/add_sub1 &&
test_dir_is_empty sub1 &&
git submodule update --init --recursive &&
test_submodule_content sub1 origin/add_sub1
)
'
# ... and doesn't care if it already exists ...
test_expect_success "$command: added submodule leaves existing empty directory alone" '
prolog &&
reset_work_tree_to no_submodule &&
(
cd submodule_update &&
git branch -t add_sub1 origin/add_sub1 &&
mkdir sub1 &&
$command add_sub1 &&
test_superproject_content origin/add_sub1 &&
test_dir_is_empty sub1 &&
git submodule update --init --recursive &&
test_submodule_content sub1 origin/add_sub1
)
'
# ... unless there is an untracked file in its place.
test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" '
prolog &&
reset_work_tree_to no_submodule &&
(
cd submodule_update &&
git branch -t add_sub1 origin/add_sub1 &&
>sub1 &&
$command add_sub1 &&
test_superproject_content origin/add_sub1 &&
test_dir_is_empty sub1
)
'
# Replacing a tracked file with a submodule produces an empty
# directory ...
test_expect_success "$command: replace tracked file with submodule creates empty directory" '
prolog &&
reset_work_tree_to replace_sub1_with_file &&
(
cd submodule_update &&
git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
$command replace_file_with_sub1 &&
test_superproject_content origin/replace_file_with_sub1 &&
test_dir_is_empty sub1 &&
git submodule update --init --recursive &&
test_submodule_content sub1 origin/replace_file_with_sub1
)
'
# ... as does removing a directory with tracked files with a
# submodule.
test_expect_success "$command: replace directory with submodule" '
prolog &&
reset_work_tree_to replace_sub1_with_directory &&
(
cd submodule_update &&
git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
$command replace_directory_with_sub1 &&
test_superproject_content origin/replace_directory_with_sub1 &&
test_dir_is_empty sub1 &&
git submodule update --init --recursive &&
test_submodule_content sub1 origin/replace_directory_with_sub1
)
'
######################## Disappearing submodule #######################
# Removing a submodule doesn't remove its work tree ...
test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t remove_sub1 origin/remove_sub1 &&
$command remove_sub1 &&
test_superproject_content origin/remove_sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
# ... especially when it contains a .git directory.
test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t remove_sub1 origin/remove_sub1 &&
replace_gitfile_with_git_dir sub1 &&
$command remove_sub1 &&
test_superproject_content origin/remove_sub1 &&
test_git_directory_is_unchanged sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
# Replacing a submodule with files in a directory must fail as the
# submodule work tree isn't removed ...
test_expect_failure "$command: replace submodule with a directory must fail" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
test_must_fail $command replace_sub1_with_directory &&
test_superproject_content origin/add_sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
# ... especially when it contains a .git directory.
test_expect_failure "$command: replace submodule containing a .git directory with a directory must fail" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
replace_gitfile_with_git_dir sub1 &&
test_must_fail $command replace_sub1_with_directory &&
test_superproject_content origin/add_sub1 &&
test_git_directory_is_unchanged sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
# Replacing it with a file must fail as it could throw away any local
# work tree changes ...
test_expect_failure "$command: replace submodule with a file must fail" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
test_must_fail $command replace_sub1_with_file &&
test_superproject_content origin/add_sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
# ... or even destroy unpushed parts of submodule history if that
# still uses a .git directory.
test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
replace_gitfile_with_git_dir sub1 &&
test_must_fail $command replace_sub1_with_file &&
test_superproject_content origin/add_sub1 &&
test_git_directory_is_unchanged sub1 &&
test_submodule_content sub1 origin/add_sub1
)
'
########################## Modified submodule #########################
# Updating a submodule sha1 doesn't update the submodule's work tree
test_expect_success "$command: modified submodule does not update submodule work tree" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t modify_sub1 origin/modify_sub1 &&
$command modify_sub1 &&
test_superproject_content origin/modify_sub1 &&
test_submodule_content sub1 origin/add_sub1 &&
git submodule update &&
test_submodule_content sub1 origin/modify_sub1
)
'
# Updating a submodule to an invalid sha1 doesn't update the
# submodule's work tree, subsequent update will fail
test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" '
prolog &&
reset_work_tree_to add_sub1 &&
(
cd submodule_update &&
git branch -t invalid_sub1 origin/invalid_sub1 &&
$command invalid_sub1 &&
test_superproject_content origin/invalid_sub1 &&
test_submodule_content sub1 origin/add_sub1 &&
test_must_fail git submodule update &&
test_submodule_content sub1 origin/add_sub1
)
'
# Updating a submodule from an invalid sha1 doesn't update the
# submodule's work tree, subsequent update will succeed
test_expect_success "$command: modified submodule does not update submodule work tree from invalid commit" '
prolog &&
reset_work_tree_to invalid_sub1 &&
(
cd submodule_update &&
git branch -t valid_sub1 origin/valid_sub1 &&
$command valid_sub1 &&
test_superproject_content origin/valid_sub1 &&
test_dir_is_empty sub1 &&
git submodule update --init --recursive &&
test_submodule_content sub1 origin/valid_sub1
)
'
}