mirror of
https://github.com/git/git.git
synced 2024-10-31 06:17:56 +01:00
fada767463
If both core.bare and core.worktree are set, we complain about the bogus config and die. Dying is good, because it avoids commands running and doing damage in a potentially incorrect setup. But dying _there_ is bad, because it means that commands which do not even care about the work tree cannot run. This can make repairing the situation harder: [setup] $ git config core.bare true $ git config core.worktree /some/path [OK, expected.] $ git status fatal: core.bare and core.worktree do not make sense [Hrm...] $ git config --unset core.worktree fatal: core.bare and core.worktree do not make sense [Nope...] $ git config --edit fatal: core.bare and core.worktree do not make sense [Gaaah.] $ git help config fatal: core.bare and core.worktree do not make sense Instead, let's issue a warning about the bogus config when we notice it (i.e., for all commands), but only die when the command tries to use the work tree (by calling setup_work_tree). So we now get: $ git status warning: core.bare and core.worktree do not make sense fatal: unable to set up work tree using invalid config $ git config --unset core.worktree warning: core.bare and core.worktree do not make sense We have to update t1510 to accomodate this; it uses symbolic-ref to check whether the configuration works or not, but of course that command does not use the working tree. Instead, we switch it to use `git status`, as it requires a work-tree, does not need any special setup, and is read-only (so a failure will not adversely affect further tests). In addition, we add a new test that checks the desired behavior (i.e., that running "git config" with the bogus config does in fact work). Reported-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
801 lines
25 KiB
Bash
Executable file
801 lines
25 KiB
Bash
Executable file
#!/bin/sh
|
|
|
|
test_description="Tests of cwd/prefix/worktree/gitdir setup in all cases
|
|
|
|
A few rules for repo setup:
|
|
|
|
1. GIT_DIR is relative to user's cwd. --git-dir is equivalent to
|
|
GIT_DIR.
|
|
|
|
2. .git file is relative to parent directory. .git file is basically
|
|
symlink in disguise. The directory where .git file points to will
|
|
become new git_dir.
|
|
|
|
3. core.worktree is relative to git_dir.
|
|
|
|
4. GIT_WORK_TREE is relative to user's cwd. --work-tree is
|
|
equivalent to GIT_WORK_TREE.
|
|
|
|
5. GIT_WORK_TREE/core.worktree was originally meant to work only if
|
|
GIT_DIR is set, but earlier git didn't enforce it, and some scripts
|
|
depend on the implementation that happened to first discover .git by
|
|
going up from the users $cwd and then using the specified working tree
|
|
that may or may not have any relation to where .git was found in. This
|
|
historical behaviour must be kept.
|
|
|
|
6. Effective GIT_WORK_TREE overrides core.worktree and core.bare
|
|
|
|
7. Effective core.worktree conflicts with core.bare
|
|
|
|
8. If GIT_DIR is set but neither worktree nor bare setting is given,
|
|
original cwd becomes worktree.
|
|
|
|
9. If .git discovery is done inside a repo, the repo becomes a bare
|
|
repo. .git discovery is performed if GIT_DIR is not set.
|
|
|
|
10. If no worktree is available, cwd remains unchanged, prefix is
|
|
NULL.
|
|
|
|
11. When user's cwd is outside worktree, cwd remains unchanged,
|
|
prefix is NULL.
|
|
"
|
|
. ./test-lib.sh
|
|
|
|
here=$(pwd)
|
|
|
|
test_repo () {
|
|
(
|
|
cd "$1" &&
|
|
if test -n "$2"
|
|
then
|
|
GIT_DIR="$2" &&
|
|
export GIT_DIR
|
|
fi &&
|
|
if test -n "$3"
|
|
then
|
|
GIT_WORK_TREE="$3" &&
|
|
export GIT_WORK_TREE
|
|
fi &&
|
|
rm -f trace &&
|
|
GIT_TRACE_SETUP="$(pwd)/trace" git symbolic-ref HEAD >/dev/null &&
|
|
grep '^setup: ' trace >result &&
|
|
test_cmp expected result
|
|
)
|
|
}
|
|
|
|
maybe_config () {
|
|
file=$1 var=$2 value=$3 &&
|
|
if test "$value" != unset
|
|
then
|
|
git config --file="$file" "$var" "$value"
|
|
fi
|
|
}
|
|
|
|
setup_repo () {
|
|
name=$1 worktreecfg=$2 gitfile=$3 barecfg=$4 &&
|
|
sane_unset GIT_DIR GIT_WORK_TREE &&
|
|
|
|
git init "$name" &&
|
|
maybe_config "$name/.git/config" core.worktree "$worktreecfg" &&
|
|
maybe_config "$name/.git/config" core.bare "$barecfg" &&
|
|
mkdir -p "$name/sub/sub" &&
|
|
|
|
if test "${gitfile:+set}"
|
|
then
|
|
mv "$name/.git" "$name.git" &&
|
|
echo "gitdir: ../$name.git" >"$name/.git"
|
|
fi
|
|
}
|
|
|
|
maybe_set () {
|
|
var=$1 value=$2 &&
|
|
if test "$value" != unset
|
|
then
|
|
eval "$var=\$value" &&
|
|
export $var
|
|
fi
|
|
}
|
|
|
|
setup_env () {
|
|
worktreenv=$1 gitdirenv=$2 &&
|
|
sane_unset GIT_DIR GIT_WORK_TREE &&
|
|
maybe_set GIT_DIR "$gitdirenv" &&
|
|
maybe_set GIT_WORK_TREE "$worktreeenv"
|
|
}
|
|
|
|
expect () {
|
|
cat >"$1/expected" <<-EOF
|
|
setup: git_dir: $2
|
|
setup: worktree: $3
|
|
setup: cwd: $4
|
|
setup: prefix: $5
|
|
EOF
|
|
}
|
|
|
|
try_case () {
|
|
name=$1 worktreeenv=$2 gitdirenv=$3 &&
|
|
setup_env "$worktreeenv" "$gitdirenv" &&
|
|
expect "$name" "$4" "$5" "$6" "$7" &&
|
|
test_repo "$name"
|
|
}
|
|
|
|
run_wt_tests () {
|
|
N=$1 gitfile=$2
|
|
|
|
absgit="$here/$N/.git"
|
|
dotgit=.git
|
|
dotdotgit=../../.git
|
|
|
|
if test "$gitfile"
|
|
then
|
|
absgit="$here/$N.git"
|
|
dotgit=$absgit dotdotgit=$absgit
|
|
fi
|
|
|
|
test_expect_success "#$N: explicit GIT_WORK_TREE and GIT_DIR at toplevel" '
|
|
try_case $N "$here/$N" .git \
|
|
"$dotgit" "$here/$N" "$here/$N" "(null)" &&
|
|
try_case $N . .git \
|
|
"$dotgit" "$here/$N" "$here/$N" "(null)" &&
|
|
try_case $N "$here/$N" "$here/$N/.git" \
|
|
"$absgit" "$here/$N" "$here/$N" "(null)" &&
|
|
try_case $N . "$here/$N/.git" \
|
|
"$absgit" "$here/$N" "$here/$N" "(null)"
|
|
'
|
|
|
|
test_expect_success "#$N: explicit GIT_WORK_TREE and GIT_DIR in subdir" '
|
|
try_case $N/sub/sub "$here/$N" ../../.git \
|
|
"$absgit" "$here/$N" "$here/$N" sub/sub/ &&
|
|
try_case $N/sub/sub ../.. ../../.git \
|
|
"$absgit" "$here/$N" "$here/$N" sub/sub/ &&
|
|
try_case $N/sub/sub "$here/$N" "$here/$N/.git" \
|
|
"$absgit" "$here/$N" "$here/$N" sub/sub/ &&
|
|
try_case $N/sub/sub ../.. "$here/$N/.git" \
|
|
"$absgit" "$here/$N" "$here/$N" sub/sub/
|
|
'
|
|
|
|
test_expect_success "#$N: explicit GIT_WORK_TREE from parent of worktree" '
|
|
try_case $N "$here/$N/wt" .git \
|
|
"$dotgit" "$here/$N/wt" "$here/$N" "(null)" &&
|
|
try_case $N wt .git \
|
|
"$dotgit" "$here/$N/wt" "$here/$N" "(null)" &&
|
|
try_case $N wt "$here/$N/.git" \
|
|
"$absgit" "$here/$N/wt" "$here/$N" "(null)" &&
|
|
try_case $N "$here/$N/wt" "$here/$N/.git" \
|
|
"$absgit" "$here/$N/wt" "$here/$N" "(null)"
|
|
'
|
|
|
|
test_expect_success "#$N: explicit GIT_WORK_TREE from nephew of worktree" '
|
|
try_case $N/sub/sub "$here/$N/wt" ../../.git \
|
|
"$dotdotgit" "$here/$N/wt" "$here/$N/sub/sub" "(null)" &&
|
|
try_case $N/sub/sub ../../wt ../../.git \
|
|
"$dotdotgit" "$here/$N/wt" "$here/$N/sub/sub" "(null)" &&
|
|
try_case $N/sub/sub ../../wt "$here/$N/.git" \
|
|
"$absgit" "$here/$N/wt" "$here/$N/sub/sub" "(null)" &&
|
|
try_case $N/sub/sub "$here/$N/wt" "$here/$N/.git" \
|
|
"$absgit" "$here/$N/wt" "$here/$N/sub/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success "#$N: chdir_to_toplevel uses worktree, not git dir" '
|
|
try_case $N "$here" .git \
|
|
"$absgit" "$here" "$here" $N/ &&
|
|
try_case $N .. .git \
|
|
"$absgit" "$here" "$here" $N/ &&
|
|
try_case $N .. "$here/$N/.git" \
|
|
"$absgit" "$here" "$here" $N/ &&
|
|
try_case $N "$here" "$here/$N/.git" \
|
|
"$absgit" "$here" "$here" $N/
|
|
'
|
|
|
|
test_expect_success "#$N: chdir_to_toplevel uses worktree (from subdir)" '
|
|
try_case $N/sub/sub "$here" ../../.git \
|
|
"$absgit" "$here" "$here" $N/sub/sub/ &&
|
|
try_case $N/sub/sub ../../.. ../../.git \
|
|
"$absgit" "$here" "$here" $N/sub/sub/ &&
|
|
try_case $N/sub/sub ../../../ "$here/$N/.git" \
|
|
"$absgit" "$here" "$here" $N/sub/sub/ &&
|
|
try_case $N/sub/sub "$here" "$here/$N/.git" \
|
|
"$absgit" "$here" "$here" $N/sub/sub/
|
|
'
|
|
}
|
|
|
|
# try_repo #c GIT_WORK_TREE GIT_DIR core.worktree .gitfile? core.bare \
|
|
# (git dir) (work tree) (cwd) (prefix) \ <-- at toplevel
|
|
# (git dir) (work tree) (cwd) (prefix) <-- from subdir
|
|
try_repo () {
|
|
name=$1 worktreeenv=$2 gitdirenv=$3 &&
|
|
setup_repo "$name" "$4" "$5" "$6" &&
|
|
shift 6 &&
|
|
try_case "$name" "$worktreeenv" "$gitdirenv" \
|
|
"$1" "$2" "$3" "$4" &&
|
|
shift 4 &&
|
|
case "$gitdirenv" in
|
|
/* | ?:/* | unset) ;;
|
|
*)
|
|
gitdirenv=../$gitdirenv ;;
|
|
esac &&
|
|
try_case "$name/sub" "$worktreeenv" "$gitdirenv" \
|
|
"$1" "$2" "$3" "$4"
|
|
}
|
|
|
|
# Bit 0 = GIT_WORK_TREE
|
|
# Bit 1 = GIT_DIR
|
|
# Bit 2 = core.worktree
|
|
# Bit 3 = .git is a file
|
|
# Bit 4 = bare repo
|
|
# Case# = encoding of the above 5 bits
|
|
|
|
test_expect_success '#0: nonbare repo, no explicit configuration' '
|
|
try_repo 0 unset unset unset "" unset \
|
|
.git "$here/0" "$here/0" "(null)" \
|
|
.git "$here/0" "$here/0" sub/ 2>message &&
|
|
! test -s message
|
|
'
|
|
|
|
test_expect_success '#1: GIT_WORK_TREE without explicit GIT_DIR is accepted' '
|
|
mkdir -p wt &&
|
|
try_repo 1 "$here" unset unset "" unset \
|
|
"$here/1/.git" "$here" "$here" 1/ \
|
|
"$here/1/.git" "$here" "$here" 1/sub/ 2>message &&
|
|
! test -s message
|
|
'
|
|
|
|
test_expect_success '#2: worktree defaults to cwd with explicit GIT_DIR' '
|
|
try_repo 2 unset "$here/2/.git" unset "" unset \
|
|
"$here/2/.git" "$here/2" "$here/2" "(null)" \
|
|
"$here/2/.git" "$here/2/sub" "$here/2/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success '#2b: relative GIT_DIR' '
|
|
try_repo 2b unset ".git" unset "" unset \
|
|
".git" "$here/2b" "$here/2b" "(null)" \
|
|
"../.git" "$here/2b/sub" "$here/2b/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success '#3: setup' '
|
|
setup_repo 3 unset "" unset &&
|
|
mkdir -p 3/sub/sub 3/wt/sub
|
|
'
|
|
run_wt_tests 3
|
|
|
|
test_expect_success '#4: core.worktree without GIT_DIR set is accepted' '
|
|
setup_repo 4 ../sub "" unset &&
|
|
mkdir -p 4/sub sub &&
|
|
try_case 4 unset unset \
|
|
.git "$here/4/sub" "$here/4" "(null)" \
|
|
"$here/4/.git" "$here/4/sub" "$here/4/sub" "(null)" 2>message &&
|
|
! test -s message
|
|
'
|
|
|
|
test_expect_success '#5: core.worktree + GIT_WORK_TREE is accepted' '
|
|
# or: you cannot intimidate away the lack of GIT_DIR setting
|
|
try_repo 5 "$here" unset "$here/5" "" unset \
|
|
"$here/5/.git" "$here" "$here" 5/ \
|
|
"$here/5/.git" "$here" "$here" 5/sub/ 2>message &&
|
|
try_repo 5a .. unset "$here/5a" "" unset \
|
|
"$here/5a/.git" "$here" "$here" 5a/ \
|
|
"$here/5a/.git" "$here/5a" "$here/5a" sub/ &&
|
|
! test -s message
|
|
'
|
|
|
|
test_expect_success '#6: setting GIT_DIR brings core.worktree to life' '
|
|
setup_repo 6 "$here/6" "" unset &&
|
|
try_case 6 unset .git \
|
|
.git "$here/6" "$here/6" "(null)" &&
|
|
try_case 6 unset "$here/6/.git" \
|
|
"$here/6/.git" "$here/6" "$here/6" "(null)" &&
|
|
try_case 6/sub/sub unset ../../.git \
|
|
"$here/6/.git" "$here/6" "$here/6" sub/sub/ &&
|
|
try_case 6/sub/sub unset "$here/6/.git" \
|
|
"$here/6/.git" "$here/6" "$here/6" sub/sub/
|
|
'
|
|
|
|
test_expect_success '#6b: GIT_DIR set, core.worktree relative' '
|
|
setup_repo 6b .. "" unset &&
|
|
try_case 6b unset .git \
|
|
.git "$here/6b" "$here/6b" "(null)" &&
|
|
try_case 6b unset "$here/6b/.git" \
|
|
"$here/6b/.git" "$here/6b" "$here/6b" "(null)" &&
|
|
try_case 6b/sub/sub unset ../../.git \
|
|
"$here/6b/.git" "$here/6b" "$here/6b" sub/sub/ &&
|
|
try_case 6b/sub/sub unset "$here/6b/.git" \
|
|
"$here/6b/.git" "$here/6b" "$here/6b" sub/sub/
|
|
'
|
|
|
|
test_expect_success '#6c: GIT_DIR set, core.worktree=../wt (absolute)' '
|
|
setup_repo 6c "$here/6c/wt" "" unset &&
|
|
mkdir -p 6c/wt/sub &&
|
|
|
|
try_case 6c unset .git \
|
|
.git "$here/6c/wt" "$here/6c" "(null)" &&
|
|
try_case 6c unset "$here/6c/.git" \
|
|
"$here/6c/.git" "$here/6c/wt" "$here/6c" "(null)" &&
|
|
try_case 6c/sub/sub unset ../../.git \
|
|
../../.git "$here/6c/wt" "$here/6c/sub/sub" "(null)" &&
|
|
try_case 6c/sub/sub unset "$here/6c/.git" \
|
|
"$here/6c/.git" "$here/6c/wt" "$here/6c/sub/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success '#6d: GIT_DIR set, core.worktree=../wt (relative)' '
|
|
setup_repo 6d "$here/6d/wt" "" unset &&
|
|
mkdir -p 6d/wt/sub &&
|
|
|
|
try_case 6d unset .git \
|
|
.git "$here/6d/wt" "$here/6d" "(null)" &&
|
|
try_case 6d unset "$here/6d/.git" \
|
|
"$here/6d/.git" "$here/6d/wt" "$here/6d" "(null)" &&
|
|
try_case 6d/sub/sub unset ../../.git \
|
|
../../.git "$here/6d/wt" "$here/6d/sub/sub" "(null)" &&
|
|
try_case 6d/sub/sub unset "$here/6d/.git" \
|
|
"$here/6d/.git" "$here/6d/wt" "$here/6d/sub/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success '#6e: GIT_DIR set, core.worktree=../.. (absolute)' '
|
|
setup_repo 6e "$here" "" unset &&
|
|
try_case 6e unset .git \
|
|
"$here/6e/.git" "$here" "$here" 6e/ &&
|
|
try_case 6e unset "$here/6e/.git" \
|
|
"$here/6e/.git" "$here" "$here" 6e/ &&
|
|
try_case 6e/sub/sub unset ../../.git \
|
|
"$here/6e/.git" "$here" "$here" 6e/sub/sub/ &&
|
|
try_case 6e/sub/sub unset "$here/6e/.git" \
|
|
"$here/6e/.git" "$here" "$here" 6e/sub/sub/
|
|
'
|
|
|
|
test_expect_success '#6f: GIT_DIR set, core.worktree=../.. (relative)' '
|
|
setup_repo 6f ../../ "" unset &&
|
|
try_case 6f unset .git \
|
|
"$here/6f/.git" "$here" "$here" 6f/ &&
|
|
try_case 6f unset "$here/6f/.git" \
|
|
"$here/6f/.git" "$here" "$here" 6f/ &&
|
|
try_case 6f/sub/sub unset ../../.git \
|
|
"$here/6f/.git" "$here" "$here" 6f/sub/sub/ &&
|
|
try_case 6f/sub/sub unset "$here/6f/.git" \
|
|
"$here/6f/.git" "$here" "$here" 6f/sub/sub/
|
|
'
|
|
|
|
# case #7: GIT_WORK_TREE overrides core.worktree.
|
|
test_expect_success '#7: setup' '
|
|
setup_repo 7 non-existent "" unset &&
|
|
mkdir -p 7/sub/sub 7/wt/sub
|
|
'
|
|
run_wt_tests 7
|
|
|
|
test_expect_success '#8: gitfile, easy case' '
|
|
try_repo 8 unset unset unset gitfile unset \
|
|
"$here/8.git" "$here/8" "$here/8" "(null)" \
|
|
"$here/8.git" "$here/8" "$here/8" sub/
|
|
'
|
|
|
|
test_expect_success '#9: GIT_WORK_TREE accepted with gitfile' '
|
|
mkdir -p 9/wt &&
|
|
try_repo 9 wt unset unset gitfile unset \
|
|
"$here/9.git" "$here/9/wt" "$here/9" "(null)" \
|
|
"$here/9.git" "$here/9/sub/wt" "$here/9/sub" "(null)" 2>message &&
|
|
! test -s message
|
|
'
|
|
|
|
test_expect_success '#10: GIT_DIR can point to gitfile' '
|
|
try_repo 10 unset "$here/10/.git" unset gitfile unset \
|
|
"$here/10.git" "$here/10" "$here/10" "(null)" \
|
|
"$here/10.git" "$here/10/sub" "$here/10/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success '#10b: relative GIT_DIR can point to gitfile' '
|
|
try_repo 10b unset .git unset gitfile unset \
|
|
"$here/10b.git" "$here/10b" "$here/10b" "(null)" \
|
|
"$here/10b.git" "$here/10b/sub" "$here/10b/sub" "(null)"
|
|
'
|
|
|
|
# case #11: GIT_WORK_TREE works, gitfile case.
|
|
test_expect_success '#11: setup' '
|
|
setup_repo 11 unset gitfile unset &&
|
|
mkdir -p 11/sub/sub 11/wt/sub
|
|
'
|
|
run_wt_tests 11 gitfile
|
|
|
|
test_expect_success '#12: core.worktree with gitfile is accepted' '
|
|
try_repo 12 unset unset "$here/12" gitfile unset \
|
|
"$here/12.git" "$here/12" "$here/12" "(null)" \
|
|
"$here/12.git" "$here/12" "$here/12" sub/ 2>message &&
|
|
! test -s message
|
|
'
|
|
|
|
test_expect_success '#13: core.worktree+GIT_WORK_TREE accepted (with gitfile)' '
|
|
# or: you cannot intimidate away the lack of GIT_DIR setting
|
|
try_repo 13 non-existent-too unset non-existent gitfile unset \
|
|
"$here/13.git" "$here/13/non-existent-too" "$here/13" "(null)" \
|
|
"$here/13.git" "$here/13/sub/non-existent-too" "$here/13/sub" "(null)" 2>message &&
|
|
! test -s message
|
|
'
|
|
|
|
# case #14.
|
|
# If this were more table-driven, it could share code with case #6.
|
|
|
|
test_expect_success '#14: core.worktree with GIT_DIR pointing to gitfile' '
|
|
setup_repo 14 "$here/14" gitfile unset &&
|
|
try_case 14 unset .git \
|
|
"$here/14.git" "$here/14" "$here/14" "(null)" &&
|
|
try_case 14 unset "$here/14/.git" \
|
|
"$here/14.git" "$here/14" "$here/14" "(null)" &&
|
|
try_case 14/sub/sub unset ../../.git \
|
|
"$here/14.git" "$here/14" "$here/14" sub/sub/ &&
|
|
try_case 14/sub/sub unset "$here/14/.git" \
|
|
"$here/14.git" "$here/14" "$here/14" sub/sub/ &&
|
|
|
|
setup_repo 14c "$here/14c/wt" gitfile unset &&
|
|
mkdir -p 14c/wt/sub &&
|
|
|
|
try_case 14c unset .git \
|
|
"$here/14c.git" "$here/14c/wt" "$here/14c" "(null)" &&
|
|
try_case 14c unset "$here/14c/.git" \
|
|
"$here/14c.git" "$here/14c/wt" "$here/14c" "(null)" &&
|
|
try_case 14c/sub/sub unset ../../.git \
|
|
"$here/14c.git" "$here/14c/wt" "$here/14c/sub/sub" "(null)" &&
|
|
try_case 14c/sub/sub unset "$here/14c/.git" \
|
|
"$here/14c.git" "$here/14c/wt" "$here/14c/sub/sub" "(null)" &&
|
|
|
|
setup_repo 14d "$here/14d/wt" gitfile unset &&
|
|
mkdir -p 14d/wt/sub &&
|
|
|
|
try_case 14d unset .git \
|
|
"$here/14d.git" "$here/14d/wt" "$here/14d" "(null)" &&
|
|
try_case 14d unset "$here/14d/.git" \
|
|
"$here/14d.git" "$here/14d/wt" "$here/14d" "(null)" &&
|
|
try_case 14d/sub/sub unset ../../.git \
|
|
"$here/14d.git" "$here/14d/wt" "$here/14d/sub/sub" "(null)" &&
|
|
try_case 14d/sub/sub unset "$here/14d/.git" \
|
|
"$here/14d.git" "$here/14d/wt" "$here/14d/sub/sub" "(null)" &&
|
|
|
|
setup_repo 14e "$here" gitfile unset &&
|
|
try_case 14e unset .git \
|
|
"$here/14e.git" "$here" "$here" 14e/ &&
|
|
try_case 14e unset "$here/14e/.git" \
|
|
"$here/14e.git" "$here" "$here" 14e/ &&
|
|
try_case 14e/sub/sub unset ../../.git \
|
|
"$here/14e.git" "$here" "$here" 14e/sub/sub/ &&
|
|
try_case 14e/sub/sub unset "$here/14e/.git" \
|
|
"$here/14e.git" "$here" "$here" 14e/sub/sub/
|
|
'
|
|
|
|
test_expect_success '#14b: core.worktree is relative to actual git dir' '
|
|
setup_repo 14b ../14b gitfile unset &&
|
|
try_case 14b unset .git \
|
|
"$here/14b.git" "$here/14b" "$here/14b" "(null)" &&
|
|
try_case 14b unset "$here/14b/.git" \
|
|
"$here/14b.git" "$here/14b" "$here/14b" "(null)" &&
|
|
try_case 14b/sub/sub unset ../../.git \
|
|
"$here/14b.git" "$here/14b" "$here/14b" sub/sub/ &&
|
|
try_case 14b/sub/sub unset "$here/14b/.git" \
|
|
"$here/14b.git" "$here/14b" "$here/14b" sub/sub/ &&
|
|
|
|
setup_repo 14f ../ gitfile unset &&
|
|
try_case 14f unset .git \
|
|
"$here/14f.git" "$here" "$here" 14f/ &&
|
|
try_case 14f unset "$here/14f/.git" \
|
|
"$here/14f.git" "$here" "$here" 14f/ &&
|
|
try_case 14f/sub/sub unset ../../.git \
|
|
"$here/14f.git" "$here" "$here" 14f/sub/sub/ &&
|
|
try_case 14f/sub/sub unset "$here/14f/.git" \
|
|
"$here/14f.git" "$here" "$here" 14f/sub/sub/
|
|
'
|
|
|
|
# case #15: GIT_WORK_TREE overrides core.worktree (gitfile case).
|
|
test_expect_success '#15: setup' '
|
|
setup_repo 15 non-existent gitfile unset &&
|
|
mkdir -p 15/sub/sub 15/wt/sub
|
|
'
|
|
run_wt_tests 15 gitfile
|
|
|
|
test_expect_success '#16a: implicitly bare repo (cwd inside .git dir)' '
|
|
setup_repo 16a unset "" unset &&
|
|
mkdir -p 16a/.git/wt/sub &&
|
|
|
|
try_case 16a/.git unset unset \
|
|
. "(null)" "$here/16a/.git" "(null)" &&
|
|
try_case 16a/.git/wt unset unset \
|
|
"$here/16a/.git" "(null)" "$here/16a/.git/wt" "(null)" &&
|
|
try_case 16a/.git/wt/sub unset unset \
|
|
"$here/16a/.git" "(null)" "$here/16a/.git/wt/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success '#16b: bare .git (cwd inside .git dir)' '
|
|
setup_repo 16b unset "" true &&
|
|
mkdir -p 16b/.git/wt/sub &&
|
|
|
|
try_case 16b/.git unset unset \
|
|
. "(null)" "$here/16b/.git" "(null)" &&
|
|
try_case 16b/.git/wt unset unset \
|
|
"$here/16b/.git" "(null)" "$here/16b/.git/wt" "(null)" &&
|
|
try_case 16b/.git/wt/sub unset unset \
|
|
"$here/16b/.git" "(null)" "$here/16b/.git/wt/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success '#16c: bare .git has no worktree' '
|
|
try_repo 16c unset unset unset "" true \
|
|
.git "(null)" "$here/16c" "(null)" \
|
|
"$here/16c/.git" "(null)" "$here/16c/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success '#16d: bareness preserved across alias' '
|
|
setup_repo 16d unset "" unset &&
|
|
(
|
|
cd 16d/.git &&
|
|
test_must_fail git status &&
|
|
git config alias.st status &&
|
|
test_must_fail git st
|
|
)
|
|
'
|
|
|
|
test_expect_success '#16e: bareness preserved by --bare' '
|
|
setup_repo 16e unset "" unset &&
|
|
(
|
|
cd 16e/.git &&
|
|
test_must_fail git status &&
|
|
test_must_fail git --bare status
|
|
)
|
|
'
|
|
|
|
test_expect_success '#17: GIT_WORK_TREE without explicit GIT_DIR is accepted (bare case)' '
|
|
# Just like #16.
|
|
setup_repo 17a unset "" true &&
|
|
setup_repo 17b unset "" true &&
|
|
mkdir -p 17a/.git/wt/sub &&
|
|
mkdir -p 17b/.git/wt/sub &&
|
|
|
|
try_case 17a/.git "$here/17a" unset \
|
|
"$here/17a/.git" "$here/17a" "$here/17a" .git/ \
|
|
2>message &&
|
|
try_case 17a/.git/wt "$here/17a" unset \
|
|
"$here/17a/.git" "$here/17a" "$here/17a" .git/wt/ &&
|
|
try_case 17a/.git/wt/sub "$here/17a" unset \
|
|
"$here/17a/.git" "$here/17a" "$here/17a" .git/wt/sub/ &&
|
|
|
|
try_case 17b/.git "$here/17b" unset \
|
|
"$here/17b/.git" "$here/17b" "$here/17b" .git/ &&
|
|
try_case 17b/.git/wt "$here/17b" unset \
|
|
"$here/17b/.git" "$here/17b" "$here/17b" .git/wt/ &&
|
|
try_case 17b/.git/wt/sub "$here/17b" unset \
|
|
"$here/17b/.git" "$here/17b" "$here/17b" .git/wt/sub/ &&
|
|
|
|
try_repo 17c "$here/17c" unset unset "" true \
|
|
.git "$here/17c" "$here/17c" "(null)" \
|
|
"$here/17c/.git" "$here/17c" "$here/17c" sub/ 2>message &&
|
|
! test -s message
|
|
'
|
|
|
|
test_expect_success '#18: bare .git named by GIT_DIR has no worktree' '
|
|
try_repo 18 unset .git unset "" true \
|
|
.git "(null)" "$here/18" "(null)" \
|
|
../.git "(null)" "$here/18/sub" "(null)" &&
|
|
try_repo 18b unset "$here/18b/.git" unset "" true \
|
|
"$here/18b/.git" "(null)" "$here/18b" "(null)" \
|
|
"$here/18b/.git" "(null)" "$here/18b/sub" "(null)"
|
|
'
|
|
|
|
# Case #19: GIT_DIR + GIT_WORK_TREE suppresses bareness.
|
|
test_expect_success '#19: setup' '
|
|
setup_repo 19 unset "" true &&
|
|
mkdir -p 19/sub/sub 19/wt/sub
|
|
'
|
|
run_wt_tests 19
|
|
|
|
test_expect_success '#20a: core.worktree without GIT_DIR accepted (inside .git)' '
|
|
# Unlike case #16a.
|
|
setup_repo 20a "$here/20a" "" unset &&
|
|
mkdir -p 20a/.git/wt/sub &&
|
|
try_case 20a/.git unset unset \
|
|
"$here/20a/.git" "$here/20a" "$here/20a" .git/ 2>message &&
|
|
try_case 20a/.git/wt unset unset \
|
|
"$here/20a/.git" "$here/20a" "$here/20a" .git/wt/ &&
|
|
try_case 20a/.git/wt/sub unset unset \
|
|
"$here/20a/.git" "$here/20a" "$here/20a" .git/wt/sub/ &&
|
|
! test -s message
|
|
'
|
|
|
|
test_expect_success '#20b/c: core.worktree and core.bare conflict' '
|
|
setup_repo 20b non-existent "" true &&
|
|
mkdir -p 20b/.git/wt/sub &&
|
|
(
|
|
cd 20b/.git &&
|
|
test_must_fail git status >/dev/null
|
|
) 2>message &&
|
|
grep "core.bare and core.worktree" message
|
|
'
|
|
|
|
test_expect_success '#20d: core.worktree and core.bare OK when working tree not needed' '
|
|
setup_repo 20d non-existent "" true &&
|
|
mkdir -p 20d/.git/wt/sub &&
|
|
(
|
|
cd 20d/.git &&
|
|
git config foo.bar value
|
|
)
|
|
'
|
|
|
|
# Case #21: core.worktree/GIT_WORK_TREE overrides core.bare' '
|
|
test_expect_success '#21: setup, core.worktree warns before overriding core.bare' '
|
|
setup_repo 21 non-existent "" unset &&
|
|
mkdir -p 21/.git/wt/sub &&
|
|
(
|
|
cd 21/.git &&
|
|
GIT_WORK_TREE="$here/21" &&
|
|
export GIT_WORK_TREE &&
|
|
git status >/dev/null
|
|
) 2>message &&
|
|
! test -s message
|
|
|
|
'
|
|
run_wt_tests 21
|
|
|
|
test_expect_success '#22a: core.worktree = GIT_DIR = .git dir' '
|
|
# like case #6.
|
|
|
|
setup_repo 22a "$here/22a/.git" "" unset &&
|
|
setup_repo 22ab . "" unset &&
|
|
mkdir -p 22a/.git/sub 22a/sub &&
|
|
mkdir -p 22ab/.git/sub 22ab/sub &&
|
|
try_case 22a/.git unset . \
|
|
. "$here/22a/.git" "$here/22a/.git" "(null)" &&
|
|
try_case 22a/.git unset "$here/22a/.git" \
|
|
"$here/22a/.git" "$here/22a/.git" "$here/22a/.git" "(null)" &&
|
|
try_case 22a/.git/sub unset .. \
|
|
"$here/22a/.git" "$here/22a/.git" "$here/22a/.git" sub/ &&
|
|
try_case 22a/.git/sub unset "$here/22a/.git" \
|
|
"$here/22a/.git" "$here/22a/.git" "$here/22a/.git" sub/ &&
|
|
|
|
try_case 22ab/.git unset . \
|
|
. "$here/22ab/.git" "$here/22ab/.git" "(null)" &&
|
|
try_case 22ab/.git unset "$here/22ab/.git" \
|
|
"$here/22ab/.git" "$here/22ab/.git" "$here/22ab/.git" "(null)" &&
|
|
try_case 22ab/.git/sub unset .. \
|
|
"$here/22ab/.git" "$here/22ab/.git" "$here/22ab/.git" sub/ &&
|
|
try_case 22ab/.git unset "$here/22ab/.git" \
|
|
"$here/22ab/.git" "$here/22ab/.git" "$here/22ab/.git" "(null)"
|
|
'
|
|
|
|
test_expect_success '#22b: core.worktree child of .git, GIT_DIR=.git' '
|
|
setup_repo 22b "$here/22b/.git/wt" "" unset &&
|
|
setup_repo 22bb wt "" unset &&
|
|
mkdir -p 22b/.git/sub 22b/sub 22b/.git/wt/sub 22b/wt/sub &&
|
|
mkdir -p 22bb/.git/sub 22bb/sub 22bb/.git/wt 22bb/wt &&
|
|
|
|
try_case 22b/.git unset . \
|
|
. "$here/22b/.git/wt" "$here/22b/.git" "(null)" &&
|
|
try_case 22b/.git unset "$here/22b/.git" \
|
|
"$here/22b/.git" "$here/22b/.git/wt" "$here/22b/.git" "(null)" &&
|
|
try_case 22b/.git/sub unset .. \
|
|
.. "$here/22b/.git/wt" "$here/22b/.git/sub" "(null)" &&
|
|
try_case 22b/.git/sub unset "$here/22b/.git" \
|
|
"$here/22b/.git" "$here/22b/.git/wt" "$here/22b/.git/sub" "(null)" &&
|
|
|
|
try_case 22bb/.git unset . \
|
|
. "$here/22bb/.git/wt" "$here/22bb/.git" "(null)" &&
|
|
try_case 22bb/.git unset "$here/22bb/.git" \
|
|
"$here/22bb/.git" "$here/22bb/.git/wt" "$here/22bb/.git" "(null)" &&
|
|
try_case 22bb/.git/sub unset .. \
|
|
.. "$here/22bb/.git/wt" "$here/22bb/.git/sub" "(null)" &&
|
|
try_case 22bb/.git/sub unset "$here/22bb/.git" \
|
|
"$here/22bb/.git" "$here/22bb/.git/wt" "$here/22bb/.git/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success '#22c: core.worktree = .git/.., GIT_DIR=.git' '
|
|
setup_repo 22c "$here/22c" "" unset &&
|
|
setup_repo 22cb .. "" unset &&
|
|
mkdir -p 22c/.git/sub 22c/sub &&
|
|
mkdir -p 22cb/.git/sub 22cb/sub &&
|
|
|
|
try_case 22c/.git unset . \
|
|
"$here/22c/.git" "$here/22c" "$here/22c" .git/ &&
|
|
try_case 22c/.git unset "$here/22c/.git" \
|
|
"$here/22c/.git" "$here/22c" "$here/22c" .git/ &&
|
|
try_case 22c/.git/sub unset .. \
|
|
"$here/22c/.git" "$here/22c" "$here/22c" .git/sub/ &&
|
|
try_case 22c/.git/sub unset "$here/22c/.git" \
|
|
"$here/22c/.git" "$here/22c" "$here/22c" .git/sub/ &&
|
|
|
|
try_case 22cb/.git unset . \
|
|
"$here/22cb/.git" "$here/22cb" "$here/22cb" .git/ &&
|
|
try_case 22cb/.git unset "$here/22cb/.git" \
|
|
"$here/22cb/.git" "$here/22cb" "$here/22cb" .git/ &&
|
|
try_case 22cb/.git/sub unset .. \
|
|
"$here/22cb/.git" "$here/22cb" "$here/22cb" .git/sub/ &&
|
|
try_case 22cb/.git/sub unset "$here/22cb/.git" \
|
|
"$here/22cb/.git" "$here/22cb" "$here/22cb" .git/sub/
|
|
'
|
|
|
|
test_expect_success '#22.2: core.worktree and core.bare conflict' '
|
|
setup_repo 22 "$here/22" "" true &&
|
|
(
|
|
cd 22/.git &&
|
|
GIT_DIR=. &&
|
|
export GIT_DIR &&
|
|
test_must_fail git status 2>result
|
|
) &&
|
|
(
|
|
cd 22 &&
|
|
GIT_DIR=.git &&
|
|
export GIT_DIR &&
|
|
test_must_fail git status 2>result
|
|
) &&
|
|
grep "core.bare and core.worktree" 22/.git/result &&
|
|
grep "core.bare and core.worktree" 22/result
|
|
'
|
|
|
|
# Case #23: GIT_DIR + GIT_WORK_TREE(+core.worktree) suppresses bareness.
|
|
test_expect_success '#23: setup' '
|
|
setup_repo 23 non-existent "" true &&
|
|
mkdir -p 23/sub/sub 23/wt/sub
|
|
'
|
|
run_wt_tests 23
|
|
|
|
test_expect_success '#24: bare repo has no worktree (gitfile case)' '
|
|
try_repo 24 unset unset unset gitfile true \
|
|
"$here/24.git" "(null)" "$here/24" "(null)" \
|
|
"$here/24.git" "(null)" "$here/24/sub" "(null)"
|
|
'
|
|
|
|
test_expect_success '#25: GIT_WORK_TREE accepted if GIT_DIR unset (bare gitfile case)' '
|
|
try_repo 25 "$here/25" unset unset gitfile true \
|
|
"$here/25.git" "$here/25" "$here/25" "(null)" \
|
|
"$here/25.git" "$here/25" "$here/25" "sub/" 2>message &&
|
|
! test -s message
|
|
'
|
|
|
|
test_expect_success '#26: bare repo has no worktree (GIT_DIR -> gitfile case)' '
|
|
try_repo 26 unset "$here/26/.git" unset gitfile true \
|
|
"$here/26.git" "(null)" "$here/26" "(null)" \
|
|
"$here/26.git" "(null)" "$here/26/sub" "(null)" &&
|
|
try_repo 26b unset .git unset gitfile true \
|
|
"$here/26b.git" "(null)" "$here/26b" "(null)" \
|
|
"$here/26b.git" "(null)" "$here/26b/sub" "(null)"
|
|
'
|
|
|
|
# Case #27: GIT_DIR + GIT_WORK_TREE suppresses bareness (with gitfile).
|
|
test_expect_success '#27: setup' '
|
|
setup_repo 27 unset gitfile true &&
|
|
mkdir -p 27/sub/sub 27/wt/sub
|
|
'
|
|
run_wt_tests 27 gitfile
|
|
|
|
test_expect_success '#28: core.worktree and core.bare conflict (gitfile case)' '
|
|
setup_repo 28 "$here/28" gitfile true &&
|
|
(
|
|
cd 28 &&
|
|
test_must_fail git status
|
|
) 2>message &&
|
|
grep "core.bare and core.worktree" message
|
|
'
|
|
|
|
# Case #29: GIT_WORK_TREE(+core.worktree) overrides core.bare (gitfile case).
|
|
test_expect_success '#29: setup' '
|
|
setup_repo 29 non-existent gitfile true &&
|
|
mkdir -p 29/sub/sub 29/wt/sub &&
|
|
(
|
|
cd 29 &&
|
|
GIT_WORK_TREE="$here/29" &&
|
|
export GIT_WORK_TREE &&
|
|
git status
|
|
) 2>message &&
|
|
! test -s message
|
|
'
|
|
run_wt_tests 29 gitfile
|
|
|
|
test_expect_success '#30: core.worktree and core.bare conflict (gitfile version)' '
|
|
# Just like case #22.
|
|
setup_repo 30 "$here/30" gitfile true &&
|
|
(
|
|
cd 30 &&
|
|
test_must_fail env GIT_DIR=.git git status 2>result
|
|
) &&
|
|
grep "core.bare and core.worktree" 30/result
|
|
'
|
|
|
|
# Case #31: GIT_DIR + GIT_WORK_TREE(+core.worktree) suppresses
|
|
# bareness (gitfile version).
|
|
test_expect_success '#31: setup' '
|
|
setup_repo 31 non-existent gitfile true &&
|
|
mkdir -p 31/sub/sub 31/wt/sub
|
|
'
|
|
run_wt_tests 31 gitfile
|
|
|
|
test_done
|