1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-10-31 14:27:54 +01:00
git/t/t9107-git-svn-migrate.sh
Johan Herland fe191fcaa5 Git 2.0: git svn: Set default --prefix='origin/' if --prefix is not given
git-svn by default puts its Subversion-tracking refs directly in
refs/remotes/*. This runs counter to Git's convention of using
refs/remotes/$remote/* for storing remote-tracking branches.

Furthermore, combining git-svn with regular git remotes run the risk of
clobbering refs under refs/remotes (e.g. if you have a git remote
called "tags" with a "v1" branch, it will overlap with the git-svn's
tracking branch for the "v1" tag from Subversion.

Even though the git-svn refs stored in refs/remotes/* are not "proper"
remote-tracking branches (since they are not covered by a proper git
remote's refspec), they clearly represent a similar concept, and would
benefit from following the same convention.

For example, if git-svn tracks Subversion branch "foo" at
refs/remotes/foo, and you create a local branch refs/heads/foo to add
some commits to be pushed back to Subversion (using "git svn dcommit),
then it is clearly unhelpful of Git to throw

  warning: refname 'foo' is ambiguous.

every time you checkout, rebase, or otherwise interact with the branch.

The existing workaround for this is to supply the --prefix=quux/ to
git svn init/clone, so that git-svn's tracking branches end up in
refs/remotes/quux/* instead of refs/remotes/*. However, encouraging
users to specify --prefix to work around a design flaw in git-svn is
suboptimal, and not a long term solution to the problem. Instead,
git-svn should default to use a non-empty prefix that saves
unsuspecting users from the inconveniences described above.

This patch will only affect newly created git-svn setups, as the
--prefix option only applies to git svn init (and git svn clone).
Existing git-svn setups will continue with their existing (lack of)
prefix. Also, if anyone somehow prefers git-svn's old layout, they
can recreate that by explicitly passing an empty prefix (--prefix "")
on the git svn init/clone command line.

The patch changes the default value for --prefix from "" to "origin/",
updates the git-svn manual page, and fixes the fallout in the git-svn
testcases.

(Note that this patch might be easier to review using the --word-diff
and --word-diff-regex=. diff options.)

[ew: squashed description of <= 1.9 behavior into manpage]

Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
2014-04-19 11:30:13 +00:00

125 lines
5 KiB
Bash
Executable file

#!/bin/sh
# Copyright (c) 2006 Eric Wong
test_description='git svn metadata migrations from previous versions'
. ./lib-git-svn.sh
test_expect_success 'setup old-looking metadata' '
cp "$GIT_DIR"/config "$GIT_DIR"/config-old-git-svn &&
mkdir import &&
(
cd import &&
for i in trunk branches/a branches/b tags/0.1 tags/0.2 tags/0.3
do
mkdir -p $i &&
echo hello >>$i/README ||
exit 1
done &&
svn_cmd import -m test . "$svnrepo"
) &&
git svn init "$svnrepo" &&
git svn fetch &&
rm -rf "$GIT_DIR"/svn &&
git update-ref refs/heads/git-svn-HEAD refs/${remotes_git_svn} &&
git update-ref refs/heads/svn-HEAD refs/${remotes_git_svn} &&
git update-ref -d refs/${remotes_git_svn} refs/${remotes_git_svn}
'
head=`git rev-parse --verify refs/heads/git-svn-HEAD^0`
test_expect_success 'git-svn-HEAD is a real HEAD' "test -n '$head'"
svnrepo_escaped=`echo $svnrepo | sed 's/ /%20/'`
test_expect_success 'initialize old-style (v0) git svn layout' '
mkdir -p "$GIT_DIR"/git-svn/info "$GIT_DIR"/svn/info &&
echo "$svnrepo" > "$GIT_DIR"/git-svn/info/url &&
echo "$svnrepo" > "$GIT_DIR"/svn/info/url &&
git svn migrate &&
! test -d "$GIT_DIR"/git-svn &&
git rev-parse --verify refs/${remotes_git_svn}^0 &&
git rev-parse --verify refs/remotes/svn^0 &&
test "$(git config --get svn-remote.svn.url)" = "$svnrepo_escaped" &&
test `git config --get svn-remote.svn.fetch` = \
":refs/${remotes_git_svn}"
'
test_expect_success 'initialize a multi-repository repo' '
git svn init "$svnrepo" -T trunk -t tags -b branches &&
git config --get-all svn-remote.svn.fetch > fetch.out &&
grep "^trunk:refs/remotes/origin/trunk$" fetch.out &&
test -n "`git config --get svn-remote.svn.branches \
"^branches/\*:refs/remotes/origin/\*$"`" &&
test -n "`git config --get svn-remote.svn.tags \
"^tags/\*:refs/remotes/origin/tags/\*$"`" &&
git config --unset svn-remote.svn.branches \
"^branches/\*:refs/remotes/origin/\*$" &&
git config --unset svn-remote.svn.tags \
"^tags/\*:refs/remotes/origin/tags/\*$" &&
git config --add svn-remote.svn.fetch "branches/a:refs/remotes/origin/a" &&
git config --add svn-remote.svn.fetch "branches/b:refs/remotes/origin/b" &&
for i in tags/0.1 tags/0.2 tags/0.3; do
git config --add svn-remote.svn.fetch \
$i:refs/remotes/origin/$i || exit 1; done &&
git config --get-all svn-remote.svn.fetch > fetch.out &&
grep "^trunk:refs/remotes/origin/trunk$" fetch.out &&
grep "^branches/a:refs/remotes/origin/a$" fetch.out &&
grep "^branches/b:refs/remotes/origin/b$" fetch.out &&
grep "^tags/0\.1:refs/remotes/origin/tags/0\.1$" fetch.out &&
grep "^tags/0\.2:refs/remotes/origin/tags/0\.2$" fetch.out &&
grep "^tags/0\.3:refs/remotes/origin/tags/0\.3$" fetch.out &&
grep "^:refs/${remotes_git_svn}" fetch.out
'
# refs should all be different, but the trees should all be the same:
test_expect_success 'multi-fetch works on partial urls + paths' "
git svn multi-fetch &&
for i in trunk a b tags/0.1 tags/0.2 tags/0.3; do
git rev-parse --verify refs/remotes/origin/\$i^0 >> refs.out || exit 1;
done &&
test -z \"\`sort < refs.out | uniq -d\`\" &&
for i in trunk a b tags/0.1 tags/0.2 tags/0.3; do
for j in trunk a b tags/0.1 tags/0.2 tags/0.3; do
if test \$j != \$i; then continue; fi
test -z \"\`git diff refs/remotes/origin/\$i \
refs/remotes/origin/\$j\`\" ||exit 1; done; done
"
test_expect_success 'migrate --minimize on old inited layout' '
git config --unset-all svn-remote.svn.fetch &&
git config --unset-all svn-remote.svn.url &&
rm -rf "$GIT_DIR"/svn &&
for i in `cat fetch.out`; do
path=`expr $i : "\([^:]*\):.*$"`
ref=`expr $i : "[^:]*:\(refs/remotes/.*\)$"`
if test -z "$ref"; then continue; fi
if test -n "$path"; then path="/$path"; fi
( mkdir -p "$GIT_DIR"/svn/$ref/info/ &&
echo "$svnrepo"$path > "$GIT_DIR"/svn/$ref/info/url ) || exit 1;
done &&
git svn migrate --minimize &&
test -z "`git config -l | grep "^svn-remote\.git-svn\."`" &&
git config --get-all svn-remote.svn.fetch > fetch.out &&
grep "^trunk:refs/remotes/origin/trunk$" fetch.out &&
grep "^branches/a:refs/remotes/origin/a$" fetch.out &&
grep "^branches/b:refs/remotes/origin/b$" fetch.out &&
grep "^tags/0\.1:refs/remotes/origin/tags/0\.1$" fetch.out &&
grep "^tags/0\.2:refs/remotes/origin/tags/0\.2$" fetch.out &&
grep "^tags/0\.3:refs/remotes/origin/tags/0\.3$" fetch.out &&
grep "^:refs/${remotes_git_svn}" fetch.out
'
test_expect_success ".rev_db auto-converted to .rev_map.UUID" '
git svn fetch -i trunk &&
test -z "$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db.* 2>/dev/null)" &&
expect="$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_map.*)" &&
test -n "$expect" &&
rev_db="$(echo $expect | sed -e "s,_map,_db,")" &&
convert_to_rev_db "$expect" "$rev_db" &&
rm -f "$expect" &&
test -f "$rev_db" &&
git svn fetch -i trunk &&
test -z "$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db.* 2>/dev/null)" &&
test ! -e "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db &&
test -f "$expect"
'
test_done