mkxp-z/mkxp.json

{
    // Lines starting with '//' are comments.
    //
    // About filesystem paths specified in this config:
    // The "gameFolder" path is resolved either relative
    // to the directory containing the mkxp executable
    // (the default behavior), or relative to the current
    // working directory (when compiled with
    // -DWORKDIR_CURRENT). All other paths are resolved
    // relative to gameFolder and ignoring both RTPs and
    // encrypted archives. Since this is JSON, any
    // backslashes in paths need to be escaped (i.e. a
    // single backslash becomes a double backslash). If
    // that's too much hassle, you can use a single forward
    // slash instead (even on Windows).

    // Some influential environment variables, set them to either "1" or "0":
    // "MKXPZ_WINDOWS_CONSOLE"
    //     - Enables/disables the extra console window on Windows. It appears by
    //       default whenever mkxp-z is started in debug mode.
    // "MKXPZ_MACOS_METAL"
    //     - Setting this will influence the rendering backend used.
    //       Probably not a good idea to mess with it unless you have some kind of issue.
    //       OpenGL is default on x86, and Metal is the default on Apple Silicon.
    //       This takes priority over the config option if it's set.
    // "MKXPZ_FOLDER_SELECT"
    //     - Allows the manual selection of the game's folder at startup.
    //       Only works on macOS at the moment.
    // "MTL_HUD_ENABLED"
    //     - On macOS 13 (Ventura) and over, provided the Metal backend is used,
    //       this will enable a full performance HUD containing more details than
    //       the built-in framerate display.


    // Specify the RGSS version to run under.
    // Possible values are 0, 1, 2, 3. If set to 0,
    // mkxp will try to guess the required version
    // based on the game files found in gameFolder.
    // If this fails, the version defaults to 1.
    // (default: 0)
    //
    // "rgssVersion": 1,


    // Continuously display average FPS in window title.
    // This can always be toggled with F2 at runtime.
    // (default: disabled)
    //
    // "displayFPS": false,


    // Continuously print average FPS to console.
    // This setting does not affect the window title
    // FPS display toggled via F2
    // (default: disabled)
    //
    // "printFPS": false,


    // Game window is resizable
    // (default: enabled)
    //
    // "winResizable": true,


    // Start game in fullscreen (this can
    // always be toggled with Alt-Enter at runtime)
    // (default: disabled)
    //
    // "fullscreen": false,


    // Preserve game screen aspect ratio,
    // as opposed to stretch-to-fill
    // (default: enabled)
    //
    // "fixedAspectRatio": true,


    // Apply smooth interpolation when game screen
    // is upscaled
    // 0: Nearest-Neighbor
    // 1: Bilinear
    // 2: Bicubic
    // 3: Lanczos3
    // 4: xBRZ
    // (default: 0)
    //
    // "smoothScaling": 0,


    // Apply smooth interpolation when game screen
    // is downscaled (same values as smoothScaling)
    // (default: 0)
    //
    // "smoothScalingDown": 0,


    // Apply smooth interpolation when bitmaps
    // are upscaled (same values as smoothScaling)
    // (default: 0)
    //
    // "bitmapSmoothScaling": 0,


    // Apply smooth interpolation when bitmaps
    // are downscaled (same values as smoothScaling)
    // (default: 0)
    //
    // "bitmapSmoothScalingDown": 0,


    // Apply mipmap interpolation when game screen
    // or bitmaps are downscaled (requires
    // "smoothScalingDown": 1 or "bitmapSmoothScalingDown": 1)
    // (default: false)
    //
    // "smoothScalingMipmaps": false,


    // Sharpness when using Bicubic scaling.
    // A good starting range is 0 to 100,
    // but you may wish to go outside that range in either direction.
    // (default: 100)
    //
    // "bicubicSharpness": 100,


    // Scaling factor for xBRZ interpolation
    // (set to at least the ratio of your window size
    // to the game's native resolution)
    // (default: 1.0)
    //
    // "xbrzScalingFactor": 4.0,


    // Replace the game's Bitmap files with external high-res files
    // provided in the "Hires" directory.
    // (You'll also need to set the below Scaling Factors.)
    // (default: disabled)
    //
    // "enableHires": false,


    // Scaling factor for textures (e.g. Bitmaps)
    // (higher values will look better if you use high-res textures)
    // (default: 1.0)
    //
    // "textureScalingFactor": 4.0,


    // Scaling factor for screen framebuffer
    // (higher values will look better if you use high-res textures)
    // (default: 1.0)
    //
    // "framebufferScalingFactor": 4.0,


    // Scaling factor for tileset atlas
    // (higher values will look better if you use high-res textures)
    // (default: 1.0)
    //
    // "atlasScalingFactor": 4.0,


    // Sync screen redraws to the monitor refresh rate
    // (default: disabled)
    //
    // "vsync": false,


    // Specify the window width on startup. If set to 0,
    // it will default to the default resolution width
    // specific to the RGSS version (640 in RGSS1, 544
    // in RGSS2 or higher).
    // (default: 0)
    //
    // "defScreenW": 640,


    // Specify the window height on startup. If set to 0,
    // it will default to the default resolution height
    // specific to the RGSS version (480 in RGSS1, 416
    // in RGSS2 or higher).
    // (default: 0)
    //
    // "defScreenH": 480,


    // Override the game window title
    // (default: none)
    //
    // "windowTitle": "Custom Title",


    // Enforce a static frame rate
    // (0 = disabled)
    //
    // "fixedFramerate": 0,


    // Skip (don't draw) frames when behind.
    // Can be changed at runtime, but this is the
    // default value when the game starts.
    // (default: disabled)
    //
    // "frameSkip": false,


    // Use a fixed framerate that is approx. equal to the
    // native screen refresh rate. This is different from
    // "fixedFramerate" because the actual frame rate is
    // reported back to the game, ensuring correct timers.
    // If the screen refresh rate cannot be determined,
    // this option is force-disabled.
    // This option may be force-disabled at build time.
    // (default: disabled)
    //
    // "syncToRefreshrate": false,


    // A list of fonts to render without alpha blending.
    // (default: none)
    //
    // "solidFonts": [
    //     "Arial",
    //     "Times New Roman",
    // ],


    // Prefer the use of Metal over OpenGL on macOS.
    // This defaults to false under Intel machines,
    // and true under ARM/Apple Silicon ones (which
    // merely emulate OpenGL anyway)
    //
    // Try changing this if you have graphics problems.
    // Metal is far better, but ANGLE may not initialize correctly
    // on some Intel machines.
    //
    // On Apple Silicon it's probably better to not touch it.
    // Emulated OpenGL is buggy, and it will also break things like
    // the Steam overlay.
    // (default: true if Apple Silicon, false if Intel)
    //
    // "preferMetalRenderer": true,
    
    
    // Work around buggy graphics drivers which don't
    // properly synchronize texture access, most
    // apparent when text doesn't show up or the map
    // tileset doesn't render at all
    // (default: disabled)
    //
    // "subImageFix": false,


    // Enable framebuffer blitting if the driver is
    // capable of it. Some drivers carry buggy
    // implementations of this functionality, so
    // disabling it can be used as a workaround.
    // Force-disabled when
    // smoothScaling or smoothScalingDown isn't
    // Nearest-Neighbor or Bilinear.
    // (default: disabled on windows, enabled on other systems)
    //
    // "enableBlitting": false,


    // Limit the maximum size (width, height) of
    // most textures mkxp will create (exceptions are
    // rendering backbuffers and similar).
    // If set to 0, the hardware maximum is used.
    // This is useful for recording traces that can
    // be played back on machines with lower specs.
    // (default: 0)
    //
    // "maxTextureSize": 0,

    // Scale up the game screen by an integer amount,
    // as large as the current window size allows, before
    // doing any last additional scalings to fill part or
    // all of the remaining window space (or none at all
    // if lastMileScaling is disabled).
    // If fixedAspectRatio is disabled, the integer scale
    // factors in horizontal and vertical direction can differ
    // depending on how much space is available, otherwise
    // they are forced to the smaller of the two.
    // (default: disabled)
    //
    // "integerScalingActive": false,


    // When integer scaling is enabled, this option controls
    // whether the scaled game screen is further scaled
    // (with linear interpolation when smoothScaling is enabled)
    // to fill the rest of the game window.
    // Note that this option still respects fixedAspectRatio.
    // (default: enabled)
    //
    // "integerScalingLastMile": true,
    
    
    // Set the base path of the game to '/path/to/game'
    // (default: executable directory)
    //
    // "gameFolder": ".",


    // Use either right or left Alt + Enter to toggle
    // fullscreen
    // (default: disabled)
    //
    // "anyAltToggleFS": false,


    // Enable F12 game reset
    // (default: enabled)
    //
    // "enableReset": true,
    
    // Enable F1/keybinding menu
    // (default: enabled)
    //
    // "enableSettings": true,


    // Allow symlinks for game assets to be followed
    // (default: enabled)
    //
    // "allowSymlinks": true,


    // Organisation / company and application / game
    // name to build the directory path where mkxp
    // will store game specific data (eg. key bindings).
    // If not specified, mkxp-z will use a folder based
    // on the name of the game, if possible, defaulting
    // to "." for Org and "mkxp-z" for App otherwise.
    // (default: none)
    //
    // "dataPathOrg": "mycompany",
    // "dataPathApp": "mygame",


    // Set the game window icon to 'path/to/icon.png'
    // Only functions on Linux.
    // (default: none)
    //
    // "iconPath": "/path/to/icon.png",


    // Instead of playing an RPG Maker game,
    // execute a single plain text script instead
    // (default: none)
    //
    // "customScript": "/path/to/script.rb",


    // Define raw scripts (e.g. compatibility wrappers)
    // to be executed before the actual Scripts.rxdata
    // execution starts
    // (default: none)
    //
    // "preloadScript": [
    //     "scripts/preload/ruby_classic_wrap.rb",
    //     "scripts/preload/mkxp_wrap.rb",
    //     "scripts/preload/win32_wrap.rb",
    // ],


    // Define raw scripts to be executed before the 
    // rgss_main execution starts for RGSS 3.
    // (default: none)
    //
    // "postloadScript": [
    //     "/path/to/script.rb",
    // ],


    // Index all accesible assets via their lower case path
    // (emulates windows case insensitivity)
    // (default: enabled)
    //
    // "pathCache": true,

    // Add 'rtp1', 'rtp2.zip' and 'game.rgssad' to the asset search path
    // (multiple allowed). You can use folders, RGSS archives, and any archive
    // formats supported by PhysicsFS; see the compatibility list at:
    // https://www.icculus.org/physfs/docs/html/
    // (default: none)
    //
    // "RTP": [
    //     "/path/to/rtp1",
    //     "/path/to/rtp2.zip",
    //     "/path/to/game.rgssad",
    // ],

    // Similar to the RTP option, except items are loaded before
    // the game archive and folder, for incremental game updates
    // or modding.
    // (default: none)
    //
    // "patches": [
    //     "/path/to/patch1.zip",
    //     "/path/to/patch2",
    // ],


    // Use the script's name as filename in warnings and error messages
    // (default: enabled)
    //
    // "useScriptNames": true,


    // Font substitutions allow drop-in replacements of fonts
    // to be used without changing the RGSS scripts,
    // eg. providing 'Open Sans' when the game thinkgs it's
    // using 'Arial'. Font family to be substituted and
    // replacement family are separated by one sole '>'.
    // Be careful not to include any spaces.
    // This is not connected to the built-in font, which is
    // always used when a non-existing font family is
    // requested by RGSS.
    // (default: none)
    //
    // "fontSub": [
    //     "Arial>Open Sans",
    //     "Times New Roman>Liberation Serif",
    // ],


    // Because mkxp is usually distributed as a stand alone
    // build, no predefined load paths are initialized
    // ($:, $LOAD_PATH) in the MRI backend. With this option,
    // they can be specified manually (eg. when using a system
    // libruby.so). It is however recommended to statically
    // link all required gems into libruby.so.
    // (default: none)
    //
    // "rubyLoadpath": [
    //     "/usr/lib64/ruby/",
    //     "/usr/local/share/ruby/site_ruby",
    // ],

    // Determines whether MJIT is enabled. This probably
    // won't work unless you also have the header file
    // that it needs. Only works with Ruby 2.6 or higher.
    // This Ruby feature is experimental.
    // (default: false)
    //
    // "JITEnable": false,
    
    // Determines what level of verbosity to use when
    // logging MJIT events. Starts at 0, which is next
    // to nothing. Set it higher to see more.
    // (default: 0)
    //
    // "JITVerboseLevel": 0,
    
    // Determines how many compiled methods that Ruby
    // will keep in its MJIT cache.
    // (default: 100)
    //
    // "JITMaxCache": 100,
    
    // Determines how many times a function has to be
    // called before it is compiled by MJIT.
    // (default: 10000)
    //
    // "JITMinCalls": 10000,

    // Determines whether YJIT is enabled.
    // Only works with Ruby 3.1 or higher.
    // This Ruby feature is experimental.
    // (default: false)
    //
    // "YJITEnable": false,

    // SoundFont to use for midi playback (via fluidsynth)
    // (default: none)
    //
    // "midiSoundFont": "Audio/BGM/GMGSx.sf2",


    // Activate "chorus" effect for midi playback
    //
    // "midiChorus": false,


    // Activate "reverb" effect for midi playback
    //
    // "midiReverb": false,


    // Number of OpenAL sources to allocate for SE playback.
    // If there are a lot of sounds playing at the same time
    // and audibly cutting each other off, try increasing
    // this number. Maximum: 64.
    //
    // "SESourceCount": 6,
    
    // Number of streams to open for BGM tracks. If the game
    // needs multitrack audio, this should be set to as many
    // available tracks as the game needs. Maximum: 16.
    //
    // "BGMTrackCount": 1,


    // The Windows game executable name minus ".exe". By default
    // this is "Game", but some developers manually rename it.
    // mkxp needs this name because both the .ini (game
    // configuration) and .rgssad (encrypted data archive) must
    // carry the same name minus their extension, and we cannot
    // guess the executable's name.
    // You could just as well rename them both to "Game.ini" and
    // "Game.rgssad", but specifying the executable name here
    // is a tiny bit less intrusive.
    //
    // "execName": "Game",
    
    // You can define alternate terminology for the different
    // inputs recognized by RPG Maker. A, B, C, X, Y, Z, L, and R
    // can all be set using this dictionary, and will be displayed
    // on the F1 menu. This is only a cosmetic effect, so it will
    // have no effect on the game's scripts.
    //
    // "bindingNames": {
    //  "c": "Confirm",
    //  "b": "Cancel",
    //  "x": ...,
    // },


    // Dump tile atlas (for debugging purposes)
    // (default: false)
    //
    // "dumpAtlas": false,

}