[jc: the original from Pavel was limiting the variable names to only
fetch and url, but I loosened it to take valid variable names.]
[jc: cherry-picked from 'master', since people seem to be reinventing
this many times.]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git-diff-files --cc" to show conflicts during merge did not pass
the correct mode information for the working tree down, and showed
bogus combined diff.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit 3af244ca added unlink(2) before running symlink(2) to
update the working tree with the merge result, but it was
unlinking a wrong path. This resulted in loss of the path
pointed by a symlink.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Ancient commit e2b6a9d0 added code to pass "file modes" from
merge-index to merge-one-file, and then later commit 54dd99a1
wanted to make sure we do not end up creating a nonsense symlink
that points at a path whose name contains conflict markers.
However, nobody noticed that the code in merge-index added by
e2b6a9d0 were stripping the S_IFMT bits and the code in 54dd99a1
was meaningless. This fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If a repository ever gets in a situation where there are too many
packs (more than 60 or so), perhaps because of frequent use of
git-fetch -k or incremental git-repack, then it becomes impossible to
fully repack the repository with git-repack -a. That command just
dies with the cryptic message
fatal: too many internal rev-list options
This message comes from git-pack-objects, which is passed one command
line option like --unpacked=pack-<SHA1>.pack for each pack file to be
repacked. However, the current code has a static limit of 64 command
line arguments and just aborts if more arguments are passed to it.
Fix this by dynamically allocating the array of command line
arguments, and doubling the size each time it overflows.
Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We should always avoid rewriting a built file during `make install`
if nothing has changed since `make all`. This is to help support
the typical installation process of compiling a package as yourself,
then installing it as root.
Forcing CREDITS-FILE to be always be rebuilt in the Makefile means
that CREDITS-GEN needs to check for a change and only update
CREDITS-FILE if the file content actually differs. After all,
content is king in Git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the blobs recorded on the index lines in the patch as pre-image
blobs are not found in the repository, "git-am" punted saying
that the index line does not record anything useful. This was not
clear enough -- the index line does have something useful but the
problem was that it was not useful in _that_ repository.
Reword the message as Francis Moreau suggests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Badly formatted commits may have very long comments. This causes
git-format-patch to fail. To avoid that, truncate the filename
to a value we believe will always work.
Err out if the patch file cannot be created.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It explains what it does and why, and says how to use the new format.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-show-ref.c (cmd_show_ref): Fail if called with --verify option but
without a reference.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code forgets that typecast binds tighter than addition, in
other words:
(cast *)array + i === ((cast *)array) + i
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With current git:
$ git init
$ git commit -a
cp: cannot stat `.git/index': No such file or directory
Output a nice error message instead.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The Makefile for the git-gui subproject will fail to execute if run
outside of a git.git directory, such as when building from a .tar.gz
or .tar.bz2. This is because it is looking for the credits file,
which was created but omitted from the tarball by the toplevel
Makefile.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git-gui:
git-gui: Don't crash in citool mode on initial commit.
git-gui: Remove TODO list.
git-gui: Include browser in our usage message.
git-gui: Change summary of git-gui.
git-gui: Display all authors of git-gui.
git-gui: Use mixed path for docs on Cygwin.
git-gui: Correct crash when saving options in blame mode.
git-gui: Expose the browser as a subcommand.
git-gui: Create new branches from a tag.
git-gui: Prefer version file over git-describe.
git-gui: Print version on the console.
git-gui: More consistently display the application name.
git-gui: Permit merging tags into the current branch.
git-gui: Basic version check to ensure git 1.5.0 or later is used.
git-gui: Refactor 'exec git subcmd' idiom.
Not everyone has gzcat or bzcat installed on their system, but
gunzip -c and bunzip2 -c perform the same task and are available
if the user has installed gzip support or bzip2 support.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Attempting to use `git citool` to create an initial commit caused
git-gui to crash with a Tcl error as it tried to add the newly
born branch to the non-existant branch menu. Moving this code
to after the normal commit cleanup logic resolves the issue, as
we only have a branch menu if we are not in singlecommit mode.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm apparently not very good at keeping my own TODO file current.
I its also somewhat strange to keep the TODO list as part of the
software branch, as its meta-information that is not directly
related to the code. I'm pulling the TODO list from git-gui and
moving it into a seperate branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that the 'browser' subcommand can be used to startup the tree
browser, it should be listed as a possible subcommand option in
our usage message.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since git-gui does more than create commits, it is unfair to call
it "a commit creation tool". Instead lets just call it a graphical
user interface.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that git-gui has been released to the public as part of Git 1.5.0
I am starting to see some work from other people beyond myself and
Paul. Consequently the copyright for git-gui is not strictly the
two of us anymore, and these others deserve to have some credit
given to them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Firefox browser requires that a URL use / to delimit directories.
This is instead of \, as \ gets escaped by the browser into its hex
escape code and then relative URLs are incorrectly resolved, Firefox
no longer sees the directories for what they are. Since we are
handing the browser a true URL, we better use the standard / for
directories.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Thanks to Simon 'corecode' Schubert <corecode@fs.ei.tum.de> for
the clean-up. Defining the C99 standard PRIuMAX when necessary
replaces UM_FMT and the awkward UM10_FMT. There are no direct
C99 translations for other uses of NO_C99_FORMAT in git, alas.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Define UM_FMT and UM10_FMT and use in place of %ju and %10ju,
respectively. Both format as unsigned long long, so this
assumes the compiler supports long long.
Signed-off-by: Jason Riedy <jason@acm.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Solaris 8 was pre-c99, and they weren't willing to commit to
the strtoumax definition according to /usr/include/inttypes.h.
This adds NO_STRTOUMAX and NO_STRTOULL for ancient systems.
If NO_STRTOUMAX is defined, the routine in compat/strtoumax.c
will be used instead. That routine passes its arguments to
strtoull unless NO_STRTOULL is defined. If NO_STRTOULL, then
the routine uses strtoul (unsigned long).
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Acked-by: Shawn O Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation advertises the new `--depth <n>' parameter with an equal
sign, while the usage notes (shown after `git-clone --help') do not. If I
understood git-clone's source code correctly, the version without the
equal sign is correct, which is why this patch syncs documentation to the
usage note.
Signed-off-by: Christian Schlotter <schlotter@users.sourceforge.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise "git rev-list --header HEAD" will not do the right
thing if i18n.commitencoding is set.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Waitz noticed that git-gui crashed while saving the user's
options out if the application was started in blame mode. This
was caused by the do_save_config procedure invoking reshow_diff
incase the number of context lines was modified by the user.
Because we bypassed main window UI setup to enter blame mode we
did not set many of the globals which were accessed by reshow_diff,
and reading unset variables is an error in Tcl.
Aside from moving the globals to be set earlier, I also modified
reshow_diff to not invoke clear_diff if there is no path currently
in the diff viewer. This way reshow_diff does not crash when in
blame mode due to the $ui_diff command not being defined.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* git://git.kernel.org/pub/scm/gitk/gitk:
Make gitk save and restore window pane position on Linux and Cygwin.
Make gitk save and restore the user set window position.
[PATCH] gitk: Use show-ref instead of ls-remote
[PATCH] Make gitk work reasonably well on Cygwin.
[PATCH] gitk - remove trailing whitespace from a few lines.
Change git repo-config to git config
Since `git add` is the approved porcelain for an end-user to invoke
when they want to manipulate the index, porcelain documentation
should steer the user to this command rather than the pure plumbing
update-index.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was mentioned on #git this morning that the lead-in description
of git-rebase is very confusing. Too many branch this and branch
that in a very short run of text.
This new description attempts to walk the user through the command
syntax, while also describing exactly what git-rebase is doing to
their repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we do not trust executable bit from lstat(2), we copied
existing ce_mode bits without checking if the filesystem object
is a regular file (which is the only thing we apply the "trust
executable bit" business) nor if the blob in the index is a
regular file (otherwise, we should do the same as registering a
new regular file, which is to default non-executable).
Noticed by Johannes Sixt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 3rd branch in builtin-blame.c should also check for lacking
arguments. Running that in top dir does not trigger the problem
because the 'prefix' is NULL.
Signed-off-by: Tommi Kyntola <tommi.kyntola@ray.fi>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The shell loop to determine if we should skip the trivial
in-index merge stage based on what strategy is given was not
prepared to have more than one strategy listed in the variable
$no_trivial_merge_strategies.
This does not trigger unless you use a modified git but the fix
is simple and straightforward, so let's fix it before 1.5.0.1.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some users may find being able to browse around an arbitrary
branch to be handy, so we now expose our graphical browser
through `git gui browse <committish>`.
Yes, I'm being somewhat lazy and making the user give us
the name of the branch to browse. They can always enter
HEAD.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm missing the possibility to base a new branch on a tag.
The following adds a tag drop down to the new branch dialog.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When somebody else extracts git tarball inside a larger project,
'git describe' would reported the version number of that upper
level project.
Sometimes, using the consistent versioning across subdirectories
of a larger project is useful, but it may not always be the
right thing to do.
This changes the script to check ./vertion file first, and then
fall back to "git describe". This way, by default, tarball
distribution will get our own version. If the upper level wants
to use consistent versioning across its subdirectories, its
Makefile can overwrite ./version file to force whatever version
number they want to give us before descending into us.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This ensures that a given area is mapped at most twice, and greatly
reduces the virtual address space usage.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
