A user shouldn't perform a commit if any of the following are true:
* The repository state has changed since the last rescan.
* There are no files updated in the index to commit.
* There are unmerged stages still in the index.
* The commit message has not been provided.
* The pre-commit hook is executable and declined.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we are refreshing from the index or updating the index we shouldn't
let the user cause other index based operations to occur as these would
likely conflict with the currently running operations possibly causing
some index changes to be lost.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Documentation: Transplanting branch with git-rebase --onto
merge-recursive implicitely depends on trust_executable_bit
adjust_shared_perm: chmod() only when needed.
Fix git-runstatus for repositories containing a file named HEAD
With this change, you can specify the beginning and the ending
line of the range you wish to inspect with pattern matching.
For example, these are equivalent with the git.git sources:
git pickaxe -L 7,21 v1.4.0 -- commit.c
git pickaxe -L '/^struct sort_node/,/^}/' v1.4.0 -- commit.c
git pickaxe -L '7,/^}/' v1.4.0 -- commit.c
git pickaxe -L '/^struct sort_node/,21' v1.4.0 -- commit.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added example of transplantig feature branch from one development
branch (for example "next") into the other development branch (for
example "master").
[jc: talking Carl's advice this contains both examples sent to
the list by Jakub in his original message.]
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* Run refresh before diff-index.
* Load saved commit message during rescan.
* Save current commit message (if any) during quit.
* Add Signed-off-by line to commit buffer.
* Batch update-index invocations through --stdin.
* Better highlight which file is in the diff viewer.
* Key bindings for signoff, check-in all and commit.
* Improved formatting of status table within source.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is based on Paul Mackerras' gitool prototype which he offered up
to the community earlier in 2006. Its mostly however a rewrite from
scratch of a Tcl/Tk based graphical interface for Git and the most
common commands users might need to perform.
Currently it can display the status of the current repository, and not
much else.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Read the configuration in to get core.filemode value for this
particular repository.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When widening permission for files and directories in a 'shared'
repository for a user with inappropriate umask() setting for
shared work, make sure we call chmod() only when we actually
need to.
The primary idea owes credit to Johannes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The wt_status_print_updated() and wt_status_print_untracked() routines
call setup_revisions() with 'HEAD' being the reference to the tip of the
current branch. However, setup_revisions() gets confused if the branch
also contains a file named 'HEAD' resulting in a fatal error.
Instead, don't pass an argv to setup_revisions() at all; simply give it no
arguments, and make 'HEAD' the default revision.
Bug noticed by Rocco Rutte <pdmef@gmx.net>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This change removes between 1 and 4 sed invocations per completion
entered by the user. In the case of cat-file the 4 invocations per
completion can take a while on Cygwin; running these replacements
directly within bash saves some time for the end user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that log, whatchanged, rev-list, etc. support the symmetric
difference operator '...' we should provide bash completion for it
just like we do for '..'.
While we are at it we can remove two sed invocations during the
interactive prompt and replace them with internal bash operations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has setup a command line of "git --git-dir=baz" then
anything we complete must be performed within the scope of "baz"
and not the current working directory.
This is useful with commands such as "git --git-dir=git.git log m"
to complete out "master" and view the log for the master branch of
the git.git repository. As a nice side effect this also works for
aliases within the target repository, just as git would honor them.
Unfortunately because we still examine arguments by absolute position
in most of the more complex commands (e.g. git push) using --git-dir
with those commands will probably still cause completion to fail.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that Git natively supports remote specifications within the
config file such as:
[remote "origin"]
url = ...
we should provide bash completion support "out of the box" for
these remotes, just like we do for the .git/remotes directory.
Also cleaned up the __git_aliases expansion to use the same form
of querying and filtering repo-config as this saves two fork/execs
in the middle of a user prompted completion. Finally also forced
the variable 'word' to be local within __git_aliased_command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only platform which actually needs to define .exe suffixes as
part of its completion set is Cygwin. So don't define them on any
other platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The show-branch and merge-base commands were partially supported
when it came to bash completions as they were only specified in
one form another. Now we specify them in both forms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It turns out that pickaxe reads the same blob repeatedly while
blame can reuse the blob already read for the parent when
handling a child commit when it's parent's turn to pass its
blame to the grandparent. Have a cache in the origin structure
to keep the blob there, which will be garbage collected when the
origin loses the last reference to it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Remove unsupported C99 style struct initializers in git-archive.
Remove SIMPLE_PROGRAMS and make git-daemon a normal program.
Use ULONG_MAX rather than implicit cast of -1.
At least one older version of the Solaris C compiler doesn't support
the newer C99 style struct initializers. To allow Git to compile
on those systems use an archive description struct which is easier
to initialize without the C99 struct initializer syntax.
Also since the archives array is not used by anyone other than
archive.c we can make it static.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some platforms (Solaris in particular) appear to require -lz as
part of the link line for git-daemon, due to it linking against
sha1_file.o and that module requiring inflate/deflate support.
So its time to retire SIMPLE_PROGRAMS and move its last remaining
member into the standard PROGRAMS list, allowing it to link against
all libraries used by the rest of Git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
At least one (older) version of the Solaris C compiler won't allow
'unsigned long x = -1' without explicitly casting -1 to a type of
unsigned long. So instead use ULONG_MAX, which is really the
correct constant anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
--copy-remote and --upgrade are rarely (never?) used together,
so if --copy-remote is specified, that means the user really
wanted to copy the remote ref, and we should fail if that fails.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is purely an aesthetic change, we already skip importing of
files that don't affect the subdirectory we import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we introduced the cached origin per commit, we gave up proper
garbage collecting because it meant that commits hold onto their
cached copy. There is no need to do so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Completion for the --hard/--soft/--mixed modes of operation as
well as a ref name for <commit-ish> can be very useful and save
some fingers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Cygwin a user might complete the new git-branch builtin as
git-branch.exe, at which point bash requires a new completion
registration for the command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The reason to do this is the same as in the previous change for
line copy detection within the same file (-M).
Also this fixes -C and -C -C (aka find-copies-harder) logic; in
this application we are not interested in the similarity
matching diffcore-rename makes, because we are only interested
in scanning files that were modified, or in the case of -C -C,
scanning all files in the parent and we want to do that
ourselves.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise we would miss copied lines that are contained in the
parts before or after the part that we find after splitting the
blame_entry (i.e. split[0] and split[2]).
Signed-off-by: Junio C Hamano <junkio@cox.net>
If more than one parents in an Octopus merge have the same
origin, ignore later ones because it would not make any
difference in the outcome.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The idea is that we are interested in renaming into only one path, so
we do not care about renames that happen elsewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We deduced a GNU diff output that does not use /dev/null convention
as creation (deletion) diff correctly by looking at the lack of context
and deleted lines (added lines), but forgot to reset the new (old) name
field properly.
This was a regression when we added a workaround for --unified=0 insanity.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this change we get a wrong $pfxlen value and the check_export_ok()
checks with with a wrong directory name. Without this patch the below
$projects_list fails with gitweb
$projects_list = "/tmp/a/b/";
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets us take advantage of the fact that git-cherry-pick now saves
the message in MERGE_MSG too.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Bound to 'o' by default, compatible with pcl-cvs and
buffer-mode. Suggested by Han-Wen Nienhuys.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is useful when doing a merge that changes many files with only a
few conflicts here and there.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes both git-fetch and git-push (fetch-pack and receive-pack)
safe against a possible race with aparallel git-repack -a -d that could
prune the new pack while it is not yet referenced, and remove the .keep
file after refs have been updated.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If by chance we receive a pack which content (list of objects) matches
another pack that we already have, and if that pack is marked with a
.keep file, then we should not overwrite it.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since functions in fetch-clone.c were only used from fetch-pack.c,
its content has been merged with fetch-pack.c. This allows for better
coupling of features with much simpler implementations.
One new thing is that the (abscence of) --thin also enforce it on
index-pack now, such that index-pack will abort if a thin pack was
_not_ asked for.
The -k or --keep, when provided twice, now causes the fetched pack
to be left as a kept pack just like receive-pack currently does.
Eventually this will be used to close a race against concurrent
repacking.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since keeping a pushed pack or exploding it into loose objects
should be a local repository decision this teaches receive-pack
to decide if it should call unpack-objects or index-pack --stdin
--fix-thin based on the setting of receive.unpackLimit and the
number of objects contained in the received pack.
If the number of objects (hdr_entries) in the received pack is
below the value of receive.unpackLimit (which is 5000 by default)
then we unpack-objects as we have in the past.
If the hdr_entries >= receive.unpackLimit then we call index-pack and
ask it to include our pid and hostname in the .keep file to make it
easier to identify why a given pack has been kept in the repository.
Currently this leaves every received pack as a kept pack. We really
don't want that as received packs will tend to be small. Instead we
want to delete the .keep file automatically after all refs have
been updated. That is being left as room for future improvement.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some applications which invoke unpack-objects or index-pack --stdin
may want to examine the pack header to determine the number of
objects contained in the pack and use that value to determine which
executable to invoke to handle the rest of the pack stream.
However if the caller consumes the pack header from the input stream
then its no longer available for unpack-objects or index-pack --stdin,
both of which need the version and object count to process the stream.
This change introduces --pack_header=ver,cnt as a command line option
that the caller can supply to indicate it has already consumed the
pack header and what version and object count were found in that
header. As this option is only meant for low level applications
such as receive-pack we are not documenting it at this time.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
