When switching branches, if the working tree has a local
modification at paths that are different between current and new
branches, we refused the operation saying "cannot merge." This
attempts to do an automerge for such paths.
This is still experimental.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier change to separate $(gitexecdir) from $(bindir) had
the installation location of the git wrapper and the rest of the
commands the wrong way (right now, both of them point at the
same location so there is no real harm).
Also gitk needs to be installed in $(bindir).
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git suite may not be in PATH (and thus programs such as
git-send-pack could not exec git-rev-list). Thus there is a need for
logic that will locate these programs. Modifying PATH is not
desirable as it result in behavior differing from the user's
intentions, as we may end up prepending "/usr/bin" to PATH.
- git C programs will use exec*_git_cmd() APIs to exec sub-commands.
- exec*_git_cmd() will execute a git program by searching for it in
the following directories:
1. --exec-path (as used by "git")
2. The GIT_EXEC_PATH environment variable.
3. $(gitexecdir) as set in Makefile (default value $(bindir)).
- git wrapper will modify PATH as before to enable shell scripts to
invoke "git-foo" commands.
Ideally, shell scripts should use the git wrapper to become independent
of PATH, and then modifying PATH will not be necessary.
[jc: with minor updates after a brief review.]
Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We rejected multi-base merge situations even though we used the
same underlying multi-base git-read-tree as the resolve strategy
uses. This was unneeded and did not add much to ensure the
merge to be truly trivial, so remove this restriction and be
more similar to what resolve does.
Also when the merge did not trivially resolve, we rejected
without stating that octopus strategy does not handle the
situation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is not invoked by any other target (most notably, "make
install" does not), but is provided as a convenience for people
who are building from the source.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier only '?' and '*' signalled the command that what the
user has given is a glob pattern. This prevented us to say:
$ git show-branch 'v0.99.[0-3]'
Now we notice '[' as well, so the above would work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a repository with mainto/1.0 (to keep maintaining the 1.0.X
series) and fixo/1.0 (to keep fixes that apply to both 1.0.X
series and upwards) branches, "git-name-rev mainto/1.0" answered
just "1.0" making things ambiguous. Show refnames unambiguously
like show-branch does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is based on the patch by Andreas Ericsson, but done slightly
differently, preferring to have separate loops -- one for options
and then arguments.
Signed-off-by: Junio C Hamano <junkio@cox.net>
update-index --stdin did not work with c-style quoted names even though
update-index --index-info did. This fixes the inconsistency.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you are a long time git user/developer, you forget that to a new git
user, these words have not the same meaning as to you.
[jc: with updates from J. Bruce Fields.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets showbranch.default multivalued configuration item to
be used as the default set of parameters to git-show-branch when
none is given on the command line.
I keep many topic branches (e.g. zzz/pack, net/misc) and
branches used only as a reference under subdirectories
(e.g. hold/{html,man,todo} track the same from git.git, but
clutters the show-branch output when shown along with the main
development; ko/master tracks what I have pushed out already and
refetched from the kernel.org server), and often run:
$ git show-branch ko/master heads/*
to view only the ko/master head and branches I keep immediately
under $GIT_DIR/refs/heads. With this change, I can have this in
my $GIT_DIR/config file:
[showbranch]
default = ko/master
default = heads/*
and say
$ git show-branch
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we are building from a working tree with local modifications,
mark the version accordingly.
Deliberately uses '-' to prevent RPM from being built from such
a tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When producing a release tarball, include a "version" file, which
GIT-VERSION-GEN can then use to do the right thing when building from a
tarball.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test exercises the standard feature that makes rebase useful.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test checks that git-cherry finds the expected number of patches
in two simple cases, and then tests the new limit arguments.
[jc: collapsed two patches into one and added sleep to make sure
the two commits would get different timestamps]
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows to use another commit than the merge base as a limit for
scanning patches.
[jc: part about t3500 test omitted.]
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Tommi Virtanen expressed a wish on #git to be able to use short and elegant
git URLs by making git-daemon 'root' in a given directory. This patch
implements this, causing git-daemon to interpret all paths relative to
the given base path if any is given.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The main loop was prepared to take more than one revs, but the actual
naming logic wad not (it used pop_most_recent_commit while forgetting
that the commit marks stay after it's done).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a trailing slash to directory names in the output
when "--others --directory" option shows only untracked
directories and not their contents, to make them stand out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When both howto-index.sh and howto/make-dist.txt exist under
Documentation/ directory, dir_exists() mistakenly checked it
without the trailing slash to see if there was something under
Documentation/howto directory, and did not realize there was,
because '-' sorts earlier than '/' and cache_name_pos() finds
howto-index.sh, which is not under howto/ directory. This
caused --others --directory to show it which was incorrect.
Check the directory name with the trailing slash, because having
an entry that has such as a prefix is what we are looking for.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Darrin Thompson notes that git-ls-files -o reports all the unknown
files it finds in a work area. Subversion and probably other systems
"simply ignore all the files and directories inside an unknown
directory and just note the directory as unknown."
With --directory option, ls-files --others shows untracked directories
without descending into them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I added things to ls-remote so that Cogito can auto-follow tags
easily and correctly a while ago, but git-fetch did not use the
facility. Recently added git-describe command relies on
repository keeping up-to-date set of tags, which made it much
more attractive to automatically follow tags, so we do that as
well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
--stdout was not mentionned, and the description for the case where -o
was not given was thus incomplete.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier commit 38ec15a973 forgot
to apply the same principle of not forcing go-w to the base
directory when specified.
Signed-off-by: Junio C Hamano <junkio@cox.net>
ISO C99 (and GCC 3.x or later) lets you write a flexible array
at the end of a structure, like this:
struct frotz {
int xyzzy;
char nitfol[]; /* more */
};
GCC 2.95 and 2.96 let you to do this with "char nitfol[0]";
unfortunately this is not allowed by ISO C90.
This declares such construct like this:
struct frotz {
int xyzzy;
char nitfol[FLEX_ARRAY]; /* more */
};
and git-compat-util.h defines FLEX_ARRAY to 0 for gcc 2.95 and
empty for others.
If you are using a C90 C compiler, you should be able
to override this with CFLAGS=-DFLEX_ARRAY=1 from the
command line of "make".
Signed-off-by: Junio C Hamano <junkio@cox.net>
When there is no pack yet, git-prune leaked an error message
from "git-pack-redundant --all" which complained that there is
no pack. Squelch the annoying message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The official maintainer is keeping up-to-date quite well, and now
the older Debian is supported with backports.org, there is no reason
for me to keep debian/ directory around here.
I have not been building and publishing debs since 1.0.4 anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In 'git cvsimport' changes "/" to "-" (or $opt_s) in branch names,
but not in tag names, which is inconsistent.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"cvs add" support was already there, but the "unknown" status
returned when querying a file not yet known to cvs caused the
script to abort prematurely.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I think it is probably a bug that "git non_existent_command"
returns its error message to stdout without an error, where
"git-non_existent_command" behaves differently and does return an
error.
Older versions of git did not implement "git describe" and
GIT-VERSION-GEN produces an empty version string if run on
a system with such a git installed. The consequence
is that "make rpm" fails.
This patch fixes GIT-VERSION-GEN so that it works in the
absence of a working "git describe"
Signed-off-by: John Ellson <ellson@research.att.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
