When "git clone --separate-git-dir=$over_there" is interrupted, it
failed to remove the real location of the $GIT_DIR it created. This
was most visible when interrupting a submodule update.
* jl/interrupt-clone-remove-separate-git-dir:
clone: support atomic operation with --separate-git-dir
"git merge --no-edit" computed who were involved in the work done
on the side branch, even though that information is to be discarded
without getting seen in the editor.
* jc/maint-fmt-merge-msg-no-edit-lose-credit:
merge --no-edit: do not credit people involved in the side branch
"git apply" misbehaved when fixing whitespace breakages by removing
excess trailing blank lines.
* jc/apply-trailing-blank-removal:
apply.c:update_pre_post_images(): the preimage can be truncated
The behaviour visible to the end users was confusing, when they
attempt to kill a process spawned in the editor that was in turn
launched by Git with SIGINT (or SIGQUIT), as Git would catch that
signal and die. We ignore these signals now.
* pf/editor-ignore-sigint:
fix compilation with NO_PTHREADS
launch_editor: propagate signals from editor to git
run-command: do not warn about child death from terminal
launch_editor: ignore terminal signals while editor has control
launch_editor: refactor to use start/finish_command
run-command: drop silent_exec_failure arg from wait_or_whine
We have two simple and quick tests to catch common mistakes when
writing test scripts, but we did not run them by default when
running tests.
* jk/enable-test-lint-by-default:
tests: turn on test-lint by default
"git merge" started calling prepare-commit-msg hook like "git
commit" does some time ago, but forgot to pay attention to the exit
status of the hook.
* ap/merge-stop-at-prepare-commit-msg-failure:
merge: Honor prepare-commit-msg return code
* jc/submittingpatches:
SubmittingPatches: give list and maintainer addresses
SubmittingPatches: remove overlong checklist
SubmittingPatches: mention subsystems with dedicated repositories
SubmittingPatches: who am I and who cares?
"gitweb", when sorting by age to show repositories with new
activities first, used to sort repositories with absolutely nothing
in it early, which was not very useful.
* os/gitweb-highlight-uncaptured:
gitweb: fix error in sanitize when highlight is enabled
When autoconf is used, any build on a different commit always ran
"config.status --recheck" even when unnecessary.
* jn/less-reconfigure:
build: do not automatically reconfigure unless configure.ac changed
When attempting to read the XDG-style $HOME/.config/git/config and
finding that $HOME/.config/git is a file, we gave a wrong error
message, instead of treating the case as "a custom config file does
not exist there" and moving on.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
The attribute mechanism didn't allow limiting attributes to be
applied to only a single directory itself with "path/" like the
exclude mechanism does.
* ja/directory-attrs:
Add directory pattern matching to attributes
"git fetch --mirror" and fetch that uses other forms of refspec with
wildcard used to attempt to update a symbolic ref that match the
wildcard on the receiving end, which made little sense (the real ref
that is pointed at by the symbolic ref would be updated anyway).
Symbolic refs no longer are affected by such a fetch.
* jc/fetch-ignore-symref:
fetch: ignore wildcarded refspecs that update local symbolic refs
The way "git svn" asked for password using SSH_ASKPASS and
GIT_ASKPASS was not in line with the rest of the system.
* ss/svn-prompt:
git-svn, perl/Git.pm: extend and use Git->prompt method for querying users
perl/Git.pm: Honor SSH_ASKPASS as fallback if GIT_ASKPASS is not set
git-svn, perl/Git.pm: add central method for prompting passwords
When make is run, the python scripts are created from *.py files that
are changed to use the python given by PYTHON_PATH. And PYTHON_PATH
is set by default to /usr/bin/python on Linux.
However, next time make is run with a different value in PYTHON_PATH,
we failed to regenerate these scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/invalidate-i-t-a-cache-tree:
cache-tree: invalidate i-t-a paths after generating trees
cache-tree: fix writing cache-tree when CE_REMOVE is present
cache-tree: replace "for" loops in update_one with "while" loops
cache-tree: remove dead i-t-a code in verify_cache()
The test fails for me on NetBSD 6.0.1 and reports:
ok 1 - ref name '' is invalid
ok 2 - ref name '/' is invalid
ok 3 - ref name '/' is invalid with options --allow-onelevel
ok 4 - ref name '/' is invalid with options --normalize
error: bug in the test script: not 2 or 3 parameters to test-expect-success
The alleged bug is in this line:
invalid_ref NOT_MINGW '/' '--allow-onelevel --normalize'
invalid_ref() constructs a test case description using its last argument,
but the shell seems to split it up into two pieces if it contains a
space. Minimal test case:
# on NetBSD with /bin/sh
$ a() { echo $#-$1-$2; }
$ t="x"; a "${t:+$t}"
1-x-
$ t="x y"; a "${t:+$t}"
2-x-y
$ t="x y"; a "${t:+x y}"
1-x y-
# and with bash
$ t="x y"; a "${t:+$t}"
1-x y-
$ t="x y"; a "${t:+x y}"
1-x y-
This may be a bug in the shell, but here's a simple workaround: Construct
the description string first and store it in a variable, and then use
that to call test_expect_success().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the ALLOC_GROW API implicitly encouraged
developers to use "ary" as the variable name for the array which is
dynamically grown. However "ary" is an unusual abbreviation hardly
used anywhere else in the source tree, and it is also better to name
variables based on their contents not on their type.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 1327452 cleaned up an unused parameter from
wait_or_whine, but forgot to update a caller that is inside
"#ifdef NO_PTHREADS".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b57fb80a7d (init, clone: support --separate-git-dir for .git file)
git clone supports the --separate-git-dir option to create the git dir
outside the work tree. But when that option is used, the git dir won't be
deleted in case the clone fails like it would be without this option. This
makes clone lose its atomicity as in case of a failure a partly set up git
dir is left behind. A real world example where this leads to problems is
when "git submodule update" fails to clone a submodule and later calls to
"git submodule update" stumble over the partially set up git dir and try
to revive the submodule from there, which then fails with a not very user
friendly error message.
Fix that by updating the junk_git_dir variable (used to remember if and
what git dir should be removed in case of failure) to the new value given
with the --seperate-git-dir option. Also add a test for this to t5600 (and
while at it fix the former last test to not cd into a directory to test
for its existence but use "test -d" instead).
Reported-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
65969d4 (merge: honor prepare-commit-msg hook, 2011-02-14) tried to
make "git commit" and "git merge" consistent, because a merge that
required user assistance has to be concluded with "git commit", but
back then only "git commit" triggered prepare-commit-msg hook.
When it added a call to run the prepare-commit-msg hook, however, it
forgot to check the exit code from the hook like "git commit" does,
and ended up replacing one inconsistency with another.
When prepare-commit-msg hook that is run from "git merge" exits with
a non-zero status, abort the commit.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test Makefile knows about a few "lint" checks for common
errors. However, they are not enabled as part of "make test"
by default, which means that many people do not bother
running them. Since they are both quick to run and accurate
(i.e., no false positives), there should be no harm in
turning them on and helping submitters catch errors earlier.
We could just set:
TEST_LINT = test-lint
to enable all tests. But that would be unnecessarily
annoying later on if we add slower or less accurate tests
that should not be part of the default. Instead, we name the
tests individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with v1.7.12-rc0~4^2 (build: reconfigure automatically if
configure.ac changes, 2012-07-19), "config.status --recheck" is
automatically run every time the "configure" script changes. In
particular, that means the configuration procedure repeats whenever
the version number changes (since the configure script changes to
support "./configure --version" and "./configure --help"), making
bisecting painfully slow.
The intent was to make the reconfiguration process only trigger for
changes to configure.ac's logic. Tweak the Makefile rule to match
that intent by depending on configure.ac instead of configure.
Reported-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We told readers to "send it to the list" (or the maintainer) without
telling what addresses are to be used. Correct this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The section is no longer a concise checklist. It also talks about
things that are not covered in the "Long version" text, which means
people need to read both, covering more or less the same thing in
different phrasing.
Fold the details into the main text and remove the section.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sed -i is not portable on all systems. Use sed with different input
and output files. Utilize a tmp file whenever needed.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$1 becomes undef by internal regex, since it has no capture groups.
Match against accpetable control characters using index() instead of a regex.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>