Whenever there are merge conflicts in file contents, we would mark the
different sides of the conflict with the two branches being merged.
However, when there is a rename involved as well, the branchname is not
sufficient to specify where the conflicting content came from. In such
cases, mark the two sides of the conflict with branchname:filename rather
than just branchname.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The consolidation of process_entry() and process_df_entry() allows us to
consolidate more code paths concerning rename conflicts, and to do
a few additional related cleanups. It also means we are using
rename_df_conflict_info in some cases where there is no D/F conflict;
rename it to rename_conflict_info.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The whole point of adding process_df_entry() was to ensure that files of
D/F conflicts were processed after paths under the corresponding
directory. However, given that the entries are in sorted order, all we
need to do is iterate through them in reverse order to achieve the same
effect. That lets us remove some duplicated code, and lets us keep
track of one less thing as we read the code ("do we need to make sure
this is processed before process_df_entry() or do we need to defer it
until then?").
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When dealing with file merging and renames and D/F conflicts and possible
criss-cross merges (how's that for a corner case?), we did not do a
thorough job ensuring the index and working directory had the correct
contents. Fix the logic in merge_content() to handle this. Also,
correct some erroneous tests in t6022 that were expecting the wrong number
of unmerged index entries. These changes fix one of the tests in t6042
(and almost fix another one from t6042 as well).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a couple of places where changes are needed to for situations
involving rename/add-source issues. Add comments about the needed changes
(and existing bugs) until git has been enabled to detect such cases.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for rename_rename_2to1 conflicts (two files both being renamed to
the same filename) was dead since the rename/add path was always being
independently triggered for each of the renames instead. Further,
reviving the dead code showed that it was inherently buggy and would
always segfault -- among a few other bugs.
Move the else-if branch for the rename/rename block before the rename/add
block to make sure it is checked first, and fix up the rename/rename(2to1)
code segments to make it handle most cases. Work is still needed to
handle higher dimensional corner cases such as rename/rename/modify/modify
issues.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the recursive case (o->call_depth > 0), we do not modify the working
directory. However, when o->call_depth==0, file renames can mean we need
to delete the old filename from the working copy. Since there have been
lots of changes and mistakes here, let's go through the details. Let's
start with a simple explanation of what we are trying to achieve:
Original goal: If a file is renamed on the side of history being merged
into head, the filename serving as the source of that rename needs to be
removed from the working directory.
The path to getting the above statement implemented in merge-recursive took
several steps. The relevant bits of code may be instructive to keep in
mind for the explanation, especially since an English-only description
involves double negatives that are hard to follow. These bits of code are:
int remove_file(..., const char *path, int no_wd)
{
...
int update_working_directory = !o->call_depth && !no_wd;
and
remove_file(o, 1, ren1_src, <expression>);
Where the choice for <expression> has morphed over time:
65ac6e9 (merge-recursive: adjust to loosened "working file clobbered"
check 2006-10-27), introduced the "no_wd" parameter to remove_file() and
used "1" for <expression>. This meant ren1_src was never deleted, leaving
it around in the working copy.
In 8371234 (Remove uncontested renamed files during merge. 2006-12-13),
<expression> was changed to "index_only" (where index_only ==
!!o->call_depth; see b7fa51da). This was equivalent to using "0" for
<expression> (due to the early logic in remove_file), and is orthogonal to
the condition we actually want to check at this point; it resulted in the
source file being removed except when index_only was false. This was
problematic because the file could have been renamed on the side of history
including head, in which case ren1_src could correspond to an untracked
file that should not be deleted.
In 183d797 (Keep untracked files not involved in a merge. 2007-02-04),
<expression> was changed to "index_only || stage == 3". While this gives
correct behavior, the "index_only ||" portion of <expression> is
unnecessary and makes the code slightly harder to follow.
There were also two further changes to this expression, though without
any change in behavior. First in b7fa51d (merge-recursive: get rid of the
index_only global variable 2008-09-02), it was changed to "o->call_depth
|| stage == 3". (index_only == !!o->call_depth). Later, in 41d70bd6
(merge-recursive: Small code clarification -- variable name and comments),
this was changed to "o->call_depth || renamed_stage == 2" (where stage was
renamed to other_stage and renamed_stage == other_stage ^ 1).
So we ended with <expression> being "o->call_depth || renamed_stage == 2".
But the "o->call_depth ||" piece was unnecessary. We can remove it,
leaving us with <expression> being "renamed_stage == 2". This doesn't
change behavior at all, but it makes the code clearer. Which is good,
because it's about to get uglier.
Corrected goal: If a file is renamed on the side of history being merged
into head, the filename serving as the source of that rename needs to be
removed from the working directory *IF* that file is tracked in head AND
the file tracked in head is related to the original file.
Note that the only difference between the original goal and the corrected
goal is the two extra conditions added at the end. The first condition is
relevant in a rename/delete conflict. If the file was deleted on the
HEAD side of the merge and an untracked file of the same name was added to
the working copy, then without that extra condition the untracked file
will be erroneously deleted. This changes <expression> to "renamed_stage
== 2 || !was_tracked(ren1_src)".
The second additional condition is relevant in two cases.
The first case the second condition can occur is when a file is deleted
and a completely different file is added with the same name. To my
knowledge, merge-recursive has no mechanism for detecting deleted-and-
replaced-by-different-file cases, so I am simply punting on this
possibility.
The second case for the second condition to occur is when there is a
rename/rename/add-source conflict. That is, when the original file was
renamed on both sides of history AND the original filename is being
re-used by some unrelated (but tracked) content. This case also presents
some additional difficulties for us since we cannot currently detect these
rename/rename/add-source conflicts; as long as the rename detection logic
"optimizes" by ignoring filenames that are present at both ends of the
diff, these conflicts will go unnoticed. However, rename/rename conflicts
are handled by an entirely separate codepath not being discussed here, so
this case is not relevant for the line of code under consideration.
In summary:
Change <expression> from "o->call_depth || renamed_stage == 2" to
"renamed_stage == 2 || !was_tracked(ren1_src)", in order to remove
unnecessary code and avoid deleting untracked files.
96 lines of explanation in the changelog to describe a one-line fix...
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having the process_renames logic update the stages in the index
for the rename destination, have the index updated after process_entry or
process_df_entry. This will also allow us to have process_entry determine
whether a file was tracked and existed in the working copy before the
merge started.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there were several files conflicting below a directory corresponding
to a D/F conflict, and the file of that D/F conflict is in the way, we
want it to be removed. Since files of D/F conflicts are handled last,
they can be reinstated later and possibly with a new unique name.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the string-list API how to remove an entry in O(1) runtime by
moving the last entry to the vacated spot. As such, the routine works
only for unsorted lists.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking whether a filename was part of stage 0 or stage 2 is code that we
would like to be able to call from a few other places without also
lstat()-ing the file to see if it exists in the working copy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename make_room_for_directories_of_df_conflicts() to
record_df_conflict_files() to reflect the change in functionality.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we were using lstat() to determine if a directory was still
present after a merge (and thus in the way of adding a file). We should
have been using lstat() only to determine if untracked directories were in
the way (and then only when necessary to check for untracked directories);
we should instead using the index to determine if there is a tracked
directory in the way. Create a new function to do this and use it to
replace the existing checks for directories being in the way.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cannot assume that directory/file conflicts will appear in sorted
order; for example, 'letters.txt' comes between 'letters' and
'letters/file'.
Thanks to Johannes for a pointer about qsort stability issues with
Windows and suggested code change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a D/F conflict is introduced via an add/add conflict, when
o->call_depth > 0 we need to ensure that the higher stage entry from the
base stage is removed.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
make_room_for_directories_of_df_conflicts() is about making sure necessary
working directory changes can succeed. When o->call_depth > 0 (i.e. the
recursive case), we do not want to make any working directory changes so
this function should be skipped.
Note that make_room_for_directories_of_df_conflicts() is broken as has
been pointed out by Junio; it should NOT be unlinking files. What it
should do is keep track of files that could be unlinked if a directory
later needs to be written in their place. However, that work also is only
relevant in the non-recursive case, so this change is helpful either way.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are only calling update_stages_options() one way really, so we can
consolidate the slightly different variants into one and remove some
parameters whose values are always the same.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hopefully no one ever hits this error except when making large changes to
merge-recursive.c and debugging...
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a testcase that was broken by b2c8c0a (merge-recursive: When we
detect we can skip an update, actually skip it 2011-02-28) and fixed by
6db4105 (Revert "Merge branch 'en/merge-recursive'" 2011-05-19). Include
this testcase to ensure we don't regress it again.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This testcase was part of en/merge-recursive that was reverted in 6db4105
(Revert "Merge branch 'en/merge-recursive'" 2011-05-19). While the other
changes in that series caused unfortunate breakage, this testcase is still
useful; reinstate it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this test later does a git add -A, we should clean out unnecessary
untracked files as part of our cleanup.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another challenging testcase trying to exercise the virtual merge
base creation in the rename/rename(1to2) code. A testcase is added that
we should be able to merge cleanly, but which requires a virtual merge
base to be created that is aware of rename/rename(1to2)/add-source
conflicts and can handle those.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is mostly just designed for testing optimality of the virtual
merge base in the event of a rename/rename(1to2) conflict. The current
choice for resolving this in git seems somewhat confusing and suboptimal.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testcases that cover three failures with current git merge, all
involving renaming one file on both sides of history:
Case 1:
If a single file is renamed to two different filenames on different sides
of history, there should be a conflict. Adding a new file on one of those
sides of history whose name happens to match the rename source should not
cause the merge to suddenly succeed.
Case 2:
If a single file is renamed on both sides of history but renamed
identically, there should not be a conflict. This works fine. However,
if one of those sides also added a new file that happened to match the
rename source, then that file should be left alone. Currently, the
rename/rename conflict handling causes that new file to become untracked.
Case 3:
If a single file is renamed to two different filenames on different sides
of history, there should be a conflict. This works currently. However,
if those renames also involve rename/add conflicts (i.e. there are new
files on one side of history that match the destination of the rename of
the other side of history), then the resulting conflict should be recorded
in the index, showing that there were multiple files with a given filename.
Currently, git silently discards one of file versions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rename/rename conflicts, both with one file being renamed to two different
files and with two files being renamed to the same file, should leave the
index and the working copy in a sane state with appropriate conflict
recording, auxiliary files, etc. Git seems to handle one of the two cases
alright, but has some problems with the two files being renamed to one
case. Add tests for both cases.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testcases that cover a variety of merge issues with files being
renamed and modified on different sides of history, when there are
directories possibly conflicting with the rename location.
Case 1:
On one side of history, a file is modified and a new directory is added.
On the other side of history, the file is modified in a non-conflicting
way but is renamed to the location of the new directory.
Case 2:
[Same as case 1, but there is also a content conflict. In detail:]
On one side of history, a file is modified and a new directory is added.
On the other side of history, the file is modified in a conflicting way
and it is renamed to the location of the new directory.
Case 3:
[Similar to case 1, but the "conflicting" directory is the directory
where the file original resided. In detail:]
On one side of history, a file is modified. On the other side of history,
the file is modified in a non-conflicting way, but the directory it was
under is removed and the file is renamed to the location of the directory
it used to reside in (i.e. 'sub/file' gets renamed to 'sub'). This is
flagged as a directory/rename conflict, but should be able to be resolved
since the directory can be cleanly removed by the merge.
One branch renames a file and makes a file where the directory the renamed
file used to be in, and the other branch updates the file in
place. Merging them should resolve it cleanly as long as the content level
change on the branches do not overlap and rename is detected, or should
leave conflict without losing information.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are cases where history should merge cleanly, and which current git
does merge cleanly despite not detecting a rename; however the merge
currently nukes files that should not be removed.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An undetected rename can cause a silent success where a conflict should
have been detected, or can cause an erroneous conflict state where the
merge should have been resolvable. Add testcases for both.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a cleanly resolvable rename/modify conflict AND there is a new
file introduced on the renamed side of the merge whose name happens to
match that of the source of the rename (but is otherwise unrelated to the
rename), then git fails to cleanly resolve the merge despite the fact that
the new file should not cause any problems.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current git will nuke an untracked file during a rename/delete conflict if
(a) there is an untracked file whose name matches the source of a rename
and (b) the merge is done in a certain direction. Add a simple testcase
demonstrating this bug.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-config-alias-fix:
handle_options(): do not miscount how many arguments were used
config: always parse GIT_CONFIG_PARAMETERS during git_config
git_config: don't peek at global config_parameters
config: make environment parsing routines static
* jk/maint-docs:
docs: fix some antique example output
docs: make sure literal "->" isn't converted to arrow
docs: update status --porcelain format
docs: minor grammar fixes to git-status
Since 9d8a5a5 (diffcore-rename: refactor "too many candidates" logic,
2011-01-06), diffcore_rename() initializes num_src but does not use it
anymore. "-Wunused-but-set-variable" in gcc-4.6 complains about this.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* vh/config-interactive-singlekey-doc:
git-reset.txt: better docs for '--patch'
git-checkout.txt: better docs for '--patch'
git-stash.txt: better docs for '--patch'
git-add.txt: document 'interactive.singlekey'
config.txt: 'interactive.singlekey; is used by...
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
