If the first patch in a series has a To: header in the file and the
second patch in the series doesn't the address from the first patch will
be part of the To: addresses in the second patch. Fix this by treating the
to list like the cc list. Have an initial to list come from the command
line, user input and config options. Then build up a to list from each
patch and concatenate the two together before sending the patch. Finally,
reset the list after sending each patch so the To: headers from a patch
don't get used for the next one.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a minor annoyance when you take the painstaking time to setup To:
headers for each patch in a large series, and then go out to send the
series with git-send-email and watch git ignore the To: headers in the
patch files.
Therefore, always add To: headers from a patch file to the To: headers
for that message. Keep the prompt for the blanket To: header so as to
not break scripts (and user expectations). This means even if a patch
has a To: header, git will prompt for the To: address. Otherwise, we'll
need to introduce interface breakage to either request the header for
each patch missing a To: header or default the header to whatever To:
address is found first (be it in a patch or from user input). Both of
these options don't seem very obvious/useful.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Tested-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GCC 4.4.4 on MacOS incorrectly warns about potential use of uninitialized memory.
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
valid_fqdn() may attempt to operate on an undefined value if
Net::Domain::domainname fails to determine the domain name. This causes
perl to emit unpleasant warnings.
So, add a check for whether $domain has been defined before using it.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When iterating through the list of directory entries, searching for
untracked entries, only the entries added to the string_list were free'd.
The rest (tracked or not matching the pathspec) were leaked.
Ditto for the "ignored" loop.
Rearrange the loops so that all entries are free'd.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test was missing some "&&" at the end of some lines and it
was wrong because, as the replacement refs were not fetched,
the commits from the parallel branch should not show up. This
was found by Elijah Newren.
This is fixed by checking that after the branch from HASH6 is
fetched, the commits from the parallel branch don't show up,
and then by fetching the replacement refs and checking that
they do show up afterwards.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the help for git filter-branch refers users of --env-filter
to git-commit for information about environment variables affecting
commits. However, this information is not contained in the git-commit
help, but is very explicitly detailed in git-commit-tree.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation in revisions.txt did not match the implementation, and
the comment in sha1_name.c was incomplete.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
be a little more verbose about what each option does
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "-L" is POSIX, the former is more portable, and
we tend to prefer it already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX wants shells to support both "N" and "$N" and requires them to yield
the same answer to $((N)) and $(($N)), but we should aim for portability
in a case like this, especially when the price we pay to do so is so
small, i.e. a few extra dollars.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems which have dash as /bin/sh, such as Ubuntu, the final
test (master@{n} for various n) fails with a syntax error while
processing an arithmetic expansion. The syntax error is caused by
using a bare name ('N') as a variable reference in the expression.
In order to avoid the syntax error, we spell the variable reference
as '$N' rather than simply 'N'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-stash uses `git rev-parse --no-revs -- "$@"` to set its
FLAGS variable. This is the same as `FLAGS="-- $@"`. It should use
`git rev-parse --no-revs --flags "$@"`, but that eats any "-q" or
"--quiet" argument. So move the check for quiet before rev-parse.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently, the 'stash show' functionality was broken for the case when a
stash-like argument was supplied. Since, commit 9bf09e, 'stash show' when
supplied a stash-like argument prints nothing and still exists with a zero
status. Unfortunately, the flaw slipped through the test suite cracks
since the output of 'stash show' was not verified to be correct.
Improve and expand on the existing tests so that this flaws is detected.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of cut do not cope well with lines that do not end in
an LF. In this case, we can completely avoid cut by using the
${var%% *} parameter expansion (suggested by Brandon Casey).
I found this problem when t3404's "avoid unnecessary reset" failed
due to the "rebase -i" not avoiding updating the tested timestamp.
On a Mac OS X 10.4.11 system:
% printf '%s' 'foo bar' | /usr/bin/cut -d ' ' -f 1
cut: stdin: Illegal byte sequence
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ancient touch on Solaris 7 thinks that a decimal number supplied as
the first argument specifies a date_time to give to the files specified by
the remaining arguments. In this case, it fails to parse '1' as a proper
date_time and exits with a failure status. Workaround this flaw by
rearranging the arguments supplied to touch so that a non-digit appears
first and touch will not be confused.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to descriptions of other options, state what -x does in imperative
mood. Start sentences for -X and --exclude-per-directory options in
capital letters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b5227d8, -x/--exclude does not apply to cached files.
This is easy to miss unless you read the discussion in the
EXCLUDE PATTERNS section. Clarify that the option applies
to untracked files and direct the reader to EXCLUDE PATTERNS.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/fix-test:
t1020: Get rid of 'cd "$HERE"' at the start of each test
t2016 (checkout -p): add missing &&
t1302 (core.repositoryversion): style tweaks
t2105 (gitfile): add missing &&
t1450 (fsck): remove dangling objects
tests: subshell indentation stylefix
Several tests: cd inside subshell instead of around
* 'master' of git://repo.or.cz/git-gui:
git-gui 0.13
git-gui: avoid mis-encoding the copyright message on Windows.
git-gui: Update Swedish translation (521t).
git-gui: ensure correct application termination in git-gui--askpass
git-gui: handle textconv filter on Windows and in development
git-gui: use shell to launch textconv filter in "blame"
git-gui: display error launching blame as a message box.
git-gui: Make usage statement visible on Windows.
On Windows the tcl script file will use the system encoding and attempting
to convert the copyright mis-encodes the string. Instead, keep the message
as ASCII and substitute in the correct unicode character when running.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
t7003-filter-branch.sh had a make_commit() function that was identical
to test_commit() in test-lib.sh except that it used tr to create a
lowercase file name from the uppercase branch name instead of
appending ".t".
Not only is this unneeded code duplication, it also was something
simply waiting to fail on case-insensitive file systems. So replace
all uses of make_commit with test_commit.
While we're editing the setup, chain it together with && so that
failures early in the sequence don't get lost and add a commit graph.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying two pathspecs, one of which is named as a prefix to the
other, we mistakenly recursed into the shorter one.
Noticed and fixed by David Reis.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, on systems that define uint32_t as an unsigned long,
gcc complains as follows:
CC vcs-svn/fast_export.o
vcs-svn/fast_export.c: In function `fast_export_modify':
vcs-svn/fast_export.c:28: warning: unsigned int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c:28: warning: int format, uint32_t arg (arg 3)
vcs-svn/fast_export.c: In function `fast_export_commit':
vcs-svn/fast_export.c:42: warning: int format, uint32_t arg (arg 5)
vcs-svn/fast_export.c:62: warning: int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c: In function `fast_export_blob':
vcs-svn/fast_export.c:72: warning: int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c:72: warning: int format, uint32_t arg (arg 3)
CC vcs-svn/svndump.o
vcs-svn/svndump.c: In function `svndump_read':
vcs-svn/svndump.c:260: warning: int format, uint32_t arg (arg 3)
In order to suppress the warnings we use the C99 format specifier
macros PRIo32 and PRIu32 from <inttypes.h>.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define the nedmalloc feature configuration macros for nedmalloc.o, only.
This keeps assert(3) working for the rest of the git source; it was
turned off for nedmalloc users before by defining NDEBUG globally.
Also remove -DUSE_NED_ALLOCATOR as this macro isn't used anywhere.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-config(1), diff.noprefix was placed in between
diff.mnemonicprefix and the list of mnemonic prefixes, which is
obviously incorrect and very confusing to readers. Now, it is located
after the end of the explanation of mnemonicprefix, which makes much
more sense.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously (e3bf5e43), a test was added to test whether the builtin
xfuncname regular expressions could be compiled without error by regcomp.
Let's do the same for the word_regex patterns. This should help catch any
cross-platform incompatibilities that exist between the pattern creator's
system and the various platforms that the test suite is commonly run on.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generally, trailing space is removed from the string matched by the
xfuncname patterns. The exception is when the matched string exceeds the
length of the fixed-size buffer that it will be copied in to. But, a
string that exceeds the buffer can still contain trailing space in the
portion of the string that will be copied into the buffer. So, simplify
this code slightly, and just perform the trailing space removal always.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
