Some email clients (e.g., claws-mail) display the message body
incorrectly when the charset is not defined explicitly in a
Content-Type header. "git log" generates logs in UTF-8 encoding by
default, so add a Content-Type header declaring that encoding to
the emails the post-receive-email example hook sends.
[jn: also setting the Content-Transfer-Encoding so MTAs know what
kind of mangling might be needed when sending to a non 8-bit clean
SMTP host]
Requested-by: Alexander Gerasiov <gq@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git commands write commit messages in UTF-8 by default, but that
default can be overridden by the [i18n] commitEncoding and
logOutputEncoding settings. With such a setting, the emails written
by the post-receive-email hook use a mixture of encodings:
1. Log messages use the configured log output encoding, which is
meant to be whatever encoding works best with local terminals
(and does not have much to do with what encoding should be used
for email)
2. Filenames are left as is: on Linux, usually UTF-8, and in the Mingw
port (which uses Unicode filesystem APIs), always UTF-8
3. The "This is an automated email" preface uses a project description
from .git/description, which is typically in UTF-8 to support
gitweb.
So (1) is configurable, and (2) and (3) are unconfigurable and
typically UTF-8. Override the log output encoding to always use UTF-8
when writing the email to get the best chance of a comprehensible
single-encoding email.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way the hook doesn't have to keep being tweaked as porcelain
learns new features like color and pagination.
While at it, replace the "git rev-list | git shortlog" idiom with
plain "git shortlog" for simplicity.
Except for depending less on the value of settings like '[log]
abbrevCommit', no change in output intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin port added a "not quite correct but a lot faster and good
enough for many lstat() calls that are only used to see if the
working tree entity matches the index entry" lstat() emulation some
time ago, and it started biting us in places. This removes it and
uses the standard lstat() that comes with Cygwin.
Recent topic that uses lstat on packed-refs file is broken when
this cheating lstat is used, and this is a simplest fix that is
also the cleanest direction to go in the long run.
* rj/cygwin-clarify-use-of-cheating-lstat:
cygwin: Remove the Win32 l/stat() implementation
This reverts commit c334b87b30c1464a1ab563fe1fb8de5eaf0e5bac; the
update assumed that people only used the command to read from
"rev-list --objects" output, whose lines begin with a 40-hex object
name followed by a whitespace, but it turns out that scripts feed
random extended SHA-1 expressions (e.g. "HEAD:$pathname") in which
a whitespace has to be kept.
Consolidate two messages phrased subtly differently without a good
reason.
* jc/rm-submodule-error-message:
builtin/rm.c: consolidate error reporting for removing submodules
We spell config variables in camelCase instead of with_underscores.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a NULL-pointer dereference during nested iterations over
references (for example, when replace references are being used).
* mh/packed-refs-do-one-ref-recursion:
do_one_ref(): save and restore value of current_ref
If the libexec directory doesn't exist, git-subtree gets installed as
$prefix/share/libexec/git-core file. This patch creates the directory
before installing git-subtree file into it.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`echo -n` is non-portable. The POSIX specification says:
Conforming applications that wish to do prompting without <newline>
characters or that could possibly be expecting to echo a -n, should
use the printf utility derived from the Ninth Edition system.
Since all of the affected shell scripts use a POSIX shell shebang,
replace `echo -n` invocations with printf.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The slab initialization code includes the calculation of the
slab 'elem_size', which is in turn used to determine the size
(capacity) of the slab. Each element of the slab represents an
array, of length 'stride', of 'elemtype'. (Note that it may be
clearer if the define_commit_slab macro parameter was called
'basetype' rather than 'elemtype'). However, the 'elem_size'
calculation incorrectly uses 'sizeof(struct slabname)' in the
expression, rather than 'sizeof(elemtype)'.
Within the slab access routine, <slabname>_at(), the given commit
'index' is transformed into an (slab#, slot#) pair used to address
the required element (a pointer to the first element of the array
of 'elemtype' associated with that commit). The current code to
calculate these address coordinates multiplies the commit index
by the 'stride' which, at least for the slab#, produces the wrong
result. Using the commit index directly, without scaling by the
'stride', produces the correct 'logical' address.
Also, when allocating a new slab, the size of the allocation only
allows for a slab containing elements of single element arrays of
'elemtype'. This should allow for elements of an array of length
'stride' of 'elemtype'. In order to fix this, we need to change
the element size parameter to xcalloc() by multiplying the current
element size (sizeof(**s->slab)) by the s->stride.
Having changed the calculation of the slot#, we now need to convert
the logical 'nth_slot', by scaling with s->stride, into the correct
physical address.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we refuse to make an empty commit, we check whether we
are in a cherry-pick in order to give better advice on how
to proceed. We instruct the user to repeat the commit with
"--allow-empty" to force the commit, or to use "git reset"
to skip it and abort the cherry-pick.
In the case of a single cherry-pick, the distinction between
skipping and aborting is not important, as there is no more
work to be done afterwards. When we are using the sequencer
to cherry pick a series of commits, though, the instruction
is confusing: does it skip this commit, or does it abort the
rest of the cherry-pick?
It does skip, after which the user can continue the
cherry-pick. This is the right thing to be advising the user
to do, but let's make it more clear what will happen, both
by using the word "skip", and by mentioning that the rest of
the sequence can be continued via "cherry-pick --continue"
(whether we skip or take the commit).
Noticed-by: Ramkumar Ramachandra <artagnon@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stress the difference between the two with a suggestion on
when the user should use one in place of the other.
Signed-off-by: Daniele Segato <daniele.segato@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --global section of git-config(1) currently reads like:
For writing options: write to global /.gitconfig file rather than the
^
start tilde
repository .git/config, write to $XDG_CONFIG_HOME/git/config file if
this file exists and the/.gitconfig file doesn’t.
^
end tilde
Instead of tilde (~) being interpreted literally, asciidoc subscripts
the text between the two tildes. To fix this problem, use backticks (`)
to quote all the paths in the file uniformly, just like config.txt does.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
See 390eb36 (upload-pack: optionally allow fetching from the tips of
hidden refs - 2013-01-28) for more information.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two (not identical) copies of error reporting when
attempting to remove submodules that have their repositories
embedded within them. Add a helper function so that we do not have
to repeat similar error messages with subtly different wording
without a good reason.
Noticed by Jiang Xin.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We mention twice that the from_ident field of struct
pretty_print_context is internal.
The first comment was added by 10f2fbf, which prepares the
struct for internal fields, and then the second by a908047,
which actually adds such a field. This was a mistake made
when re-rolling the series on the list; the comment should
have been removed from the latter commit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An enhanced "post-receive" hook to send e-mail messages.
* mh/multimail:
post-receive-email: deprecate script in favor of git-multimail
git-multimail: an improved replacement for post-receive-email
A helper to read from a set of format-patch output files or a range
of commits and find those who may have insights to the code that
the changes touch by running a series of "git blame" commands.
* es/contacts:
contrib: contacts: add documentation
contrib: contacts: add mailmap support
contrib: contacts: interpret committish akin to format-patch
contrib: contacts: add ability to parse from committish
contrib: add git-contacts helper
The tip one does _not_ revert c869753e (Force core.filemode to
false on Cygwin., 2006-12-30) on purpose, so that people can
still retain the old behaviour if they wanted to.
* ml/cygwin-updates:
cygwin: stop forcing core.filemode=false
Cygwin 1.7 supports mmap
Cygwin 1.7 has thread-safe pread
Cygwin 1.7 needs compat/regex
If somebody wants to only know on-disk footprint of an object
without having to know its type or payload size, we can bypass a
lot of code to cheaply learn it.
* jk/cat-file-batch-optim:
Fix some sparse warnings
sha1_object_info_extended: pass object_info to helpers
sha1_object_info_extended: make type calculation optional
packed_object_info: make type lookup optional
packed_object_info: hoist delta type resolution to helper
sha1_loose_object_info: make type lookup optional
sha1_object_info_extended: rename "status" to "type"
cat-file: disable object/refname ambiguity check for batch mode
On systems that understand a CRLF as a line ending, tests in this
script that worked on files with CRLF line endings using "grep" to
extract matching lines may lose the CR at the end of lines that
match, causing the actual output not to match the expected output.
* ml/avoid-using-grep-on-crlf-files:
test-lib.sh - define and use GREP_STRIPS_CR
Assorted code cleanups and a minor fix.
* sb/misc-fixes:
diff.c: Do not initialize a variable, which gets reassigned anyway.
commit: Fix a memory leak in determine_author_info
daemon.c:handle: Remove unneeded check for null pointer.
Fix "log -L" command line parsing bugs.
* tr/line-log:
t4211: fix incorrect rebase at f8395edc (range-set: satisfy non-empty ranges invariant)
line-log: fix "log -LN" crash when N is last line of file
range-set: satisfy non-empty ranges invariant
t4211: demonstrate crash when first -L encountered is empty range
t4211: demonstrate empty -L range crash
range-set: fix sort_and_merge_range_set() corner case bug
Document for interactive git-clean says: "You also could say `c` or
`clean` above as long as the choice is unique". But it's not true,
because only hotkey `c` and full match (`clean`) could work.
Implement partial matching via find_unique function to make the
document right.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The descriptions of "select by numbers" section for interactive
git-clean are borrowed from git-add, and one sentence should be
replaced.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
