There is no reason not to always do this when both ends agree.
Therefore a client that can accept offsets to delta base always sends
the "ofs-delta" flag. The server will stream a pack with or without
offset to delta base depending on whether that flag is provided or not
with no additional cost.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is the missing part to git-pack-objects allowing it to reuse delta
data to/from any of the two delta types. It can reuse delta from any
type, and it outputs base offsets when --allow-delta-base-offset is
provided and the base is also included in the pack. Otherwise it
outputs base sha1 references just like it always did.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is enabled with --delta-base-offset only, and doesn't work with
pack data reuse yet.
The idea is to allow for the fetch protocol to use an extension flag
to notify the remote end that --delta-base-offset can be used with
git-pack-objects. Eventually git-repack will always provide this flag.
With this, all delta base objects are now pushed before deltas that depend
on them. This is a requirements for OBJ_OFS_DELTA. This is not a
requirement for OBJ_REF_DELTA but always doing so makes the code simpler.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For delta resolution to be possible, a list of sha1/offset tuple must
be constructed in memory in order to load the appropriate base object.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a new object, namely OBJ_OFS_DELTA, renames OBJ_DELTA to
OBJ_REF_DELTA to better make the distinction between those two delta
objects, and adds support for the handling of those new delta objects
in sha1_file.c only.
The OBJ_OFS_DELTA contains a relative offset from the delta object's
position in a pack instead of the 20-byte SHA1 reference to identify
the base object. Since the base is likely to be not so far away, the
relative offset is more likely to have a smaller encoding on average
than an absolute offset. And for those delta objects the base must
always be stored first because there is no way to know the distance of
later objects when streaming a pack. Hence this relative offset is
always meant to be negative.
The offset encoding is slightly denser than the one used for object
size -- credits to <linux@horizon.com> (whoever this is) for bringing
it to my attention.
This allows for pack size reduction between 3.2% (Linux-2.6) to over 5%
(linux-historic). Runtime pack access should be faster too since delta
replay does skip a search in the pack index for each delta in a chain.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a simple one liner to decode long title string in perl's
internal form to utf-8 for link tooltips.
This is not crucial if the commit message is all in ASCII, however, if
you decide to use other encoding, such as UTF-8, tooltips ain't
readable any more.
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When using Subversion 1.3.1 without Perl bindings (GIT_SVN_NO_LIB=1),
"git-svn fetch --no-ignore-externals" fails with errors like:
Tree (.../.git/svn/git-svn/tree) is not clean:
X directory_with_external
In this case the 'X' lines in the "svn status" output are not a sign
of unclean tree, and therefore should be ignored.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has configured core.filemode=0 then we shouldn't set
the execute bit in the index when adding a new file as the user
has indicated that the local filesystem can't be trusted.
This means that when adding files that should be marked executable
in a repository with core.filemode=0 the user must perform a
'git update-index --chmod=+x' on the file before committing the
addition.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch documents zip backend options.
It also adds git-archive command into the main git manual
page.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Contents of %diffinfo hash should be quoted upon output but kept
unquoted internally. Later users of this hash expect filenames
to be filenames, not HTML gibberish.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When trying to import an SVN revision which has no author the Git
user may desire to relabel '(no author)' to another name and email
address with their svn.authorsfile.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added --ignore-nodate to allow 'git svn fetch' to import revisions
from Subversion which have '(no date)' listed as the date of the
revision. By default 'git svn fetch' will crash with an error
when encountering such a revision. The user may restart the fetch
operation by adding --ignore-nodate if they want to continue tracking
that repository.
I'm not entirely sure why a centralized version control system such
as Subversion permits revisions to be created with absolutely no
date/time associated with it but it apparently is possible as one
of the Subversion repositories that I'm tracking with 'git svn'
created such a revision on '(no date)' and by '(no user)'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The command now issues a big deprecation warning message and runs
git-archive command with appropriate arguments.
git-tar-tree $tree_ish $base always forces $base to be the leading
directory name, so the --prefix parameter passed internally to
git-archive is a slash appended to it, i.e. "--prefix=$base/".
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch doesn't change any functionality, it only moves code around. It
makes seeing the few remaining lines of git-tar-tree code easier. ;-)
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
generate_tar() eventually calls write_tar_archive() which does all the
"real" work and which also calls git_config(git_tar_config). We only
need to do this once.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/filter-commit:
git log: Unify header_filter and message_filter into one.
Update grep internal for grepping only in head/body
git-log --author and --committer are not left-anchored by default
rev-list: fix segfault with --{author,committer,grep}
revision traversal: --author, --committer, and --grep.
revision traversal: prepare for commit log match.
builtin-grep: make pieces of it available as library.
* sb/branch-attributes:
Add test for the default merges in fetch.
fetch: get the remote branches to merge from the branch properties
Add t5510 to test per branch configuration affecting git-fetch.
Fetch: default remote repository from branch properties
If in branch "foo" and this in config:
[branch "foo"]
merge=bar
"git fetch": fetch from the default repository and program the "bar"
branch to be merged with pull.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If in branch "foo" and this in config:
[branch "foo"]
remote=bar
"git fetch" = "git fetch bar"
"git pull" = "git pull bar"
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Looks like ctype again. Gotta be careful with that on BSD releases:
$ gmake prefix=/opt/git all
GIT_VERSION = 1.4.2.GIT
gcc -o builtin-upload-archive.o -c -g -O2 -Wall -I/usr/local/include -DSHA1_HEADER='<openssl/sha.h>' -DNO_STRCASESTR builtin-upload-archive.c
In file included from /usr/include/sys/poll.h:54,
from builtin-upload-archive.c:11:
/usr/include/ctype.h:68: error: syntax error before ']' token
/usr/include/ctype.h:69: error: syntax error before ']' token
...
/usr/include/sys/poll.h:53:1: unterminated #ifndef
/usr/include/sys/poll.h:28:1: unterminated #ifndef
gmake: *** [builtin-upload-archive.o] Error 1
This fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Consider:
http://repo.or.cz/?p=glibc-cvs.git;a=tree;h=2609cb0411389325f4ee2854cc7159756eb0671e;hb=2609cb0411389325f4ee2854cc7159756eb0671e
(click on the funny =__ify file)
We ought to handle anything in filenames and I actually see no reason why
we don't, modulo very little missing escaping that this patch hopefully
also fixes.
I have also made esc_param() escape [?=&;]. Not escaping [&;] was downright
buggy and [?=] just feels better escaped. ;-) YMMV.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Seriously, is anyone still using this thing? It's collecting dust and
blocking the name for something potentially useful like a tool for
user-friendly marking of resolved conflicts or resolving index conflicts.
We've loved you when Git was young, now thank you and please go away. ;-)
This makes git-resolve.sh print a big deprecation warning and sleep a bit
for extra annoyance. It should be removed completely after the next release.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-zip-tree can be safely removed because it was never part of a formal
release. This patch makes 'git-archive --format=zip' the one and only git
ZIP file creation command.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Those cleanups are mainly to set the table for the support of deltas
with base objects referenced by offsets instead of sha1. This means
that many pack lookup functions are converted to take a pack/offset
tuple instead of a sha1.
This eliminates many struct pack_entry usages since this structure
carried redundent information in many cases, and it increased stack
footprint needlessly for a couple recursively called functions that used
to declare a local copy of it for every recursion loop.
In the process, packed_object_info_detail() has been reorganized as well
so to look much saner and more amenable to deltas with offset support.
Finally the appropriate adjustments have been made to functions that
depend on the above changes. But there is no functionality changes yet
simply some code refactoring at this point.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's been quite a while now that GIT is able to read version 3 packs.
Let's create them at last.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This add '-S' option. When specified svn-import will try to parse
commit message for 'Signed-off-by: ...' line, and if found will use
the name and email address extracted at first occurrence as this commit
author name and author email address. Committer name and email are
extracted in usual way.
Signed-off-by: Sasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When there are single-character filenames in the test directory,
the shell tries to expand regexps meant for tr.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It would just give HEAD snapshot instead of one of the particular tree.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As it is now, that array was never used because the customurl accessor was
broken and ''unless @url_list'' never happenned.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The link forgot to have hb parameter and the resulting tree view
failed to show the navbar for that commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Based on talk on the IRC with Junio some evenings ago, I've updated the
path showing in tree view to look better and sent updated patches
privately, but it seems the old version ended up being used, so here's
the new one again.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"head" is a reference in refs/heads/, while those labels mean HEAD,
the latest revision of the default branch.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I don't have much preference either way and as far as I'm concerned, it may
go the other way as well. Consistency is what is important.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Navigation bars in various views were empty or missed important items that
should have been there, e.g. getting a snapshot in tree view or log of
ancestry in commit view...
This feeble patch attempts to consolidate that.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Current projects list is oriented on easily getting "what's new"
information. But when already using gitweb as an interface to something,
I personally find myself to _much_ more frequently wanting to rather
see "what's in" (or "what's new in") and it's quite annoying to have to
go through the summary page (which is also rather expensive to generate)
just to get there.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
