The diff.external examples pass a flag to gnu-diff, but GNU diff
does not follow the GIT_EXTERNAL_DIFF interface.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: "Stage Line": Treat independent changes in adjacent lines better
git-gui: Fix "Stage/Unstage Line" with one line of context.
git-gui: Correct 'Visualize Branches' on Mac OS X to start gitk
git-gui: Look for gitk in $PATH, not $LIBEXEC/git-core
Add a menu item to invoke full copy detection in blame.
Kill the blame back-end on window close.
Add options to control the search for copies in blame.
Fix pre-commit hooks under MinGW/MSYS
Assume that we want to commit these states:
Old state == HEAD Intermediate state New state
--------------------------------------------------------
context before context before context before
old 1 new 1 new 1
old 2 old 2 new 2
context after context after context after
that is, want to commit two changes in this order:
1. transform "old 1" into "new 1"
2. transform "old 2" into "new 2"
[This discussion and this patch is about this very case and one other case
as outlined below; any other intermediate states that one could imagine are
not affected by this patch.]
Now assume further, that we have not staged and commited anything, but we
have already changed the working file to the new state. Then we will see
this hunk in the "Unstaged Changes":
@@ -1,4 +1,4 @@
context before
-old 1
-old 2
+new 1
+new 2
context after
The obvious way to stage the intermediate state is to apply "Stage This
Line" to "-old 1" and "+new 1". Unfortunately, this resulted in this
intermediate state:
context before
old 2
new 1
context after
which is not what we wanted. In fact, it was impossible to stage the
intermediate state using "Stage Line". The crux was that if a "+" line was
staged, then the "-" lines were converted to context lines and arranged
*before* the "+" line in the forged hunk that we fed to 'git apply'.
With this patch we now treat "+" lines that are staged differently. In
particular, the "-" lines before the "+" block are moved *after* the
staged "+" line. Now it is possible to get the correct intermediate state
by staging "-old 1" and "+new 1". Problem solved.
But there is a catch.
Noticing that we didn't get the right intermediate state by staging
"-old 1" and "+new 1", we could have had the idea to stage the complete
hunk and to *unstage* "-old 2" and "+new 2". But... the result is the same.
The reason is that there is the exact symmetric problem with unstaging the
last "-" and "+" line that are in adjacent blocks of "-" and "+" lines.
This patch does *not* change the way in which "-" lines are *unstaged*.
Why? Because if we did (i.e. move "+" lines before the "-" line after
converting them to context lines), then it would be impossible to stage
this intermediate state:
context before
old 1
new 2
context after
that is, it would be impossible to stage the two independet changes in the
opposite order.
Let's look at this case a bit further: The obvious way to get this
intermediate state would be to apply "Stage This Line" to "-old 2" and
"+new 2". Before this patch, this worked as expected. With this patch, it
does not work as expected, but it can still be achieved by first staging
the entire hunk, then *unstaging* "-old 1" and "+new 1".
In summary, this patch makes a common case possible, at the expense that
a less common case is made more complicated for the user.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To "Stage/Unstage Line" we construct a patch that contains exactly one
change (either addition or removal); the hunk header was forged by counting
the old side and adjusting the count by +/-1 for the new side. But when we
counted the context we never counted the changed line itself. If the hunk
had only one removal line and one line of context, like this:
@@ -1,3 +1,2 @@
context 1
-removal
context 2
We had constructed this patch:
@@ -1,2 +1,1 @@
context 1
-removal
context 2
which does not apply because git apply deduces that it must apply at the
end of the file. ("context 2" is considered garbage and ignored.) The fix
is that removal lines must be counted towards the context of the old side.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
"git reset -q" is advertised to "only report errors", but "locally
modified" messages are still shown. They are not errors but diagnostics.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subversion repositories often require files to have properties such as
svn:mime-type and svn:eol-style set when they are added. Users
typically set these properties automatically using the SVN auto-props
feature with 'svn add'. This commit teaches dcommit to look at the user
SVN configuration and apply matching auto-props entries for files added
by a diff as it is applied to the SVN remote.
Signed-off-by: Brad King <brad.king@kitware.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the exec-path on Windows is derived from the program invocation path,
we must ensure that argv[0] always has a path. Unfortunately, if a program
is invoked from CMD, argv[0] has no path. But on the other hand, the
C runtime offers a global variable, _pgmptr, that always has the full path
to the program. We hook into main() with a preprocessor macro, where we
replace argv[0].
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function had used make_absolute_path(); but this function dies if
the directory that contains the entry whose relative path was supplied in
the argument does not exist. This is a problem if the argument is, for
example, "../libexec/git-core", and that "../libexec" does not exist.
Since the resolution of symbolic links is not required for elements in
PATH, we can fall back to using make_nonrelative_path(), which simply
prepends $PWD to the path.
We have to move make_nonrelative_path() alongside make_absolute_path() in
abspath.c so that git-shell can be linked. See 5b8e6f85f.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_EXEC_PATH (the macro that is defined in the Makefile) is relative,
it is interpreted relative to the command's invocation path, which usually
is $(bindir).
The Makefile rules were written with the assumption that $(gitexecdir) is
an absolute path. We introduce a separate variable that names the
(absolute) installation directory.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$(gitexecdir) (as defined in the Makefile) has gained another path
component, but the relative paths in the MINGW section of the Makefile,
which are interpreted relative to it, do not account for it.
Instead of adding another ../ in front of the path, we change the code that
constructs the absolute paths to do it relative to the command's directory,
which is essentially $(bindir). We do it this way because we will also
allow a relative $(gitexecdir) later.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need the command invocation path in system_path(). This path was
passed to setup_path(), but system_path() can be called earlier, for
example via:
main
commit_pager_choice
setup_pager
git_config
git_etc_gitconfig
system_path
Therefore, we introduce git_set_argv0_path() and call it as soon as
possible.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The install target needs to check whether the user has opted to make
$(gitexecdir) equal to $(bindir). It did so by a straight string
comparison. Since we are going to allow a relative $(gitexecdir), we have
to normalize paths before comparison, which we do with $(cd there && pwd).
The normalized paths are stored in shell variables. These we can now
reuse in the subsequent install statements, which conveniently shortens
the lines a bit.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is already a copy in $(bindir). A subsequent patch will enable git
to derive the exec-path from its invocation path. If git is invoked
recursively, the first invocation puts the exec-path into PATH, so that
the recursive invocation would find the instance in the exec-path. This
second instance would again try to derive an exec-path from its invocation
path, but would base its result on the wrong "bindir".
We do install the copy of git first, but remove it later, so that we can
use it as the source of the hardlinks for the builtins.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "--remote repo" and "--exec cmd" in addition to "--remote=repo" and
"--exec=cmd" to make their usage consistent with parameters handled by
parse_options().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the declaration of struct archiver to archive.c, as this is the only
file left where it is used.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MAX_EXTRA_ARGS is not used anymore, so remove it. MAX_ARGS is used only
in builtin-upload-archive.c, so define it there. Also report the actual
value we're comparing against when the number of args is too big.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_archive() in archive.c is the only callsite for the command line
parsing functions located in builtin-archive.c. Move them to the place
where they are used, un-export them and make them static, as hinted at
by Stephan.
Cc: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both archive and upload-archive have to parse command line arguments and
then call the archiver specific write function. Move the duplicate code
to a new function, write_archive().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" no longer calls "git-fetch-pack", so the documentation is a bit
stale. Instead, state that the -u option is to be used when accessing a
repository over ssh.
Signed-off-by: Steve Haslam <shaslam@lastminute.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The three separate lines for --skip, --resolved and --abort
are merged into one so that it is easy to see that they're
alternative and related options.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -u option to override the remote system's path to git-upload-pack was
being ignored by "git clone"; caused by a missing call to
transport_set_option to set TRANS_OPT_UPLOADPACK. Presumably this crept in
when git-clone was converted from shell to C.
Signed-off-by: Steve Haslam <shaslam@lastminute.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes exit()/die() calls and builtin-specific messages
from launch_editor(), so that it can be used as a general libgit.a
function to launch an editor.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
launch_editor() is declared in strbuf.h but defined in builtin-tag.c.
This patch moves launch_editor() into a new source file editor.c,
but keeps the declaration in strbuf.h.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Git 1.6 and later gitk is in $prefix/bin while git-gui and all
of the other commands are in $gitexecdir, which is typically not
the same as $prefix/bin. So we cannot launch $gitexecdir/gitk and
expect it to actually start gitk properly.
By allowing git-gui to locate the script via $PATH and then using
exactly that path when we source it during the application start
we can correctly run gitk on any Git 1.5 or later.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Makefile records paths to a few programs in GIT-BUILD-OPTIONS file. These
paths need to be quoted twice: once to protect specials from the shell
that runs the generated GIT-BUILD-OPTIONS file, and again to protect them
(and the first level of quoting itself) from the shell that runs the
"echo" inside the Makefile.
You can test this by trying:
$ ln -s /bin/tar "$HOME/Tes' program/tar"
$ make TAR="$HOME/Tes' program/tar" test
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When index-pack completes a thin pack it appends objects to the pack.
Since the commit 92392b4(index-pack: Honor core.deltaBaseCacheLimit when
resolving deltas) such an object can be pruned in case of memory
pressure, and will be read back again by get_data_from_pack(). For this
to work, the fields in object_entry structure need to be initialized
properly.
Noticed by Pierre Habouzit.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8291db6 (git-send-email: add charset header if we add encoded 'From',
2007-11-16), "$1" is used from a regexp without using () to capture
anything in $1. Later, when that value was used, it causes a warning about
a variable being undefined, instead of using the correct value for
comparison (not that it makes difference in the current code that does not
do actual re-encoding).
Signed-off-by: Peter Valdemar Mørch <peter@morch.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After looking the git-tag manpage, someone on #git wondered how
to tag a commit that is not a branch head. This patch changes
the synopsis to say "<commit> | <object>" instead of "<head>" to
address his question.
Samuel Bronson had the idea of putting "<commit> | <object>"
for "<object>" because most tags point to commits (and for the
rest of the manpage, all tags point to commits).
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perl modules must be copied to blib/lib so they are available for
testing.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d773c631 (bash: offer only paths after '--', 2008-07-08) did the
same for several other git commands, but 'git checkout' went unnoticed.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git checkout' uses '--' to separate options from paths, but it was not
mentioned in the documentation
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch is twofold: it moves the option consistency checks just under
the parse_options call so that it doesn't get in the way of the tree
reference vs. pathspecs desambiguation.
The other part rewrites the way to understand arguments so that when
git-checkout fails it does with an understandable message. Compared to the
previous behavior we now have:
- a better error message when doing:
git checkout <blob reference> --
now complains about the reference not pointing to a tree, instead of
things like:
error: pathspec <blob reference> did not match any file(s) known to git.
error: pathspec '--' did not match any file(s) known to git.
- a better error message when doing:
git checkout <path> --
It now complains about <path> not being a reference instead of the
completely obscure:
error: pathspec '--' did not match any file(s) known to git.
- an error when -- wasn't used, and the first argument is ambiguous
(i.e. can be interpreted as both ref and as path).
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5723fe7e, temporary objects are now created in their final destination
directories, rather than in .git/objects/. Teach fsck to recognize and
ignore the temporary objects it encounters, and teach prune to remove them.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f2eba66 (Enable HEAD@{...} and make it independent from the current
branch, 2007-02-03) introduced dwim_log() to handle <refname>@{...}
syntax, and as part of its processing, it checks if the ref exists by
calling refsolve_ref(). It should call it as a reader to make sure the
call returns NULL for a nonexistent ref (not as a potential writer in
which case it does not return NULL).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It previously used the same as 'log', but the options are quite
different and the arguments must be single refs (or globs).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Options added: --cached --dry-run --ignore-unmatch --quiet
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In r27729, libsvn introduced an assert which explicitly
forbids searching the tree at "/". Luckily enough, it
still accepts an empty string "" as the starting point.
http://svn.collab.net/viewvc/svn/trunk/subversion/libsvn_ra/ra_loader.c?r1=27653&r2=27729
Tested against libsvn0-1.5.0-4mdv2009.0 (needs the fix),
libsvn0-1.4.6-5mdv2008.1 (works anyway)
Signed-off-by: P. Christeas <p_christ@hol.gr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The example to remove paths using index-filter was done with
"git update-index --remove"; "git rm --cached" would be more familiar to
new people and is sufficient for this particular case.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
