"git reset" needs to refresh the index when working in a working
tree (it can also be used to match the index to the HEAD in an
otherwise bare repository), but it failed to set up the working
tree properly, causing GIT_WORK_TREE to be ignored.
* nd/reset-setup-worktree:
reset: optionally setup worktree and refresh index on --mixed
"git config" learned to read from the standard input when "-" is
given as the value to its "--file" parameter (attempting an
operation to update the configuration in the standard input of
course is rejected).
* ks/config-file-stdin:
config: teach "git config --file -" to read from the standard input
config: change git_config_with_options() interface
builtin/config.c: rename check_blob_write() -> check_write()
config: disallow relative include paths from blobs
* jk/janitorial-fixes:
open_istream(): do not dereference NULL in the error case
builtin/mv: don't use memory after free
utf8: use correct type for values in interval table
utf8: fix iconv error detection
notes-utils: handle boolean notes.rewritemode correctly
Uses of curl's "multi" interface and "easy" interface do not mix
well when we attempt to reuse outgoing connections. Teach the RPC
over http code, used in the smart HTTP transport, not to use the
"easy" interface.
* jk/http-no-curl-easy:
http: never use curl_easy_perform
Trailing whitespaces in .gitignore files, unless they are quoted for
fnmatch(3), e.g. "path\ ", are warned and ignored.
Strictly speaking, this is a backward incompatible change, but very
unlikely to bite any sane user and adjusting should be obvious and
easy.
* nd/gitignore-trailing-whitespace:
t0008: skip trailing space test on Windows
dir: ignore trailing spaces in exclude patterns
dir: warn about trailing spaces in exclude patterns
"git check-attr" when (trying to) work on a repository with a
working tree did not work well when the working tree was specified
via --work-tree (and obviously with --git-dir).
The command also works in a bare repository but it reads from the
(possibly stale, irrelevant and/or nonexistent) index, which may
need to be fixed to read from HEAD, but that is a completely
separate issue. As a related tangent to this separate issue, we
may want to also fix "check-ignore", which refuses to work in a
bare repository, to also operate in a bare one.
* jc/check-attr-honor-working-tree:
check-attr: move to the top of working tree when in non-bare repository
t0003: do not chdir the whole test process
The Windows API does not preserve file names with trailing spaces (and
dots), but rather strips them. Our tools (MSYS bash, git) base the POSIX
emulation on the Windows API. As a consequence, it is impossible for bash
on Windows to allocate a file whose name has trailing spaces, and for git
to stat such a file. Both operate on a file whose name has the spaces
stripped. Skip the test that needs such a file name.
Note that we do not use (another incarnation of) prerequisite FUNNYNAMES.
The reason is that FUNNYNAMES is intended to represent a property of the
file system. But the inability to have trailing spaces in a file name is
a property of the Windows API. The file system (NTFS) does not have this
limitation.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow running "gc --auto" in the background.
* nd/daemonize-gc:
gc: config option for running --auto in background
daemon: move daemonize() to libgit.a
Teach combine-diff to honour the path-output-order imposed by
diffcore-order, and optimize how matching paths are found in
the N-way diffs made with parents.
* ks/combine-diff:
tests: add checking that combine-diff emits only correct paths
combine-diff: simplify intersect_paths() further
combine-diff: combine_diff_path.len is not needed anymore
combine-diff: optimize combine_diff_path sets intersection
diff test: add tests for combine-diff with orderfile
diffcore-order: export generic ordering interface
Add missing leading dash to proposed commands in french output when
using the command:
git branch --set-upstream remotename/branchname
and when upstream is gone
Signed-off-by: Sandy Carter <sandy.carter@savoirfairelinux.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempting to deepen a shallow repository by fetching over smart
HTTP transport failed in the protocol exchange, when no-done
extension was used. The fetching side waited for the list of
shallow boundary commits after the sending end stopped talking to
it.
* nd/http-fetch-shallow-fix:
t5537: move http tests out to t5539
fetch-pack: fix deepen shallow over smart http with no-done cap
protocol-capabilities.txt: document no-done
protocol-capabilities.txt: refer multi_ack_detailed back to pack-protocol.txt
pack-protocol.txt: clarify 'obj-id' in the last ACK after 'done'
test: rename http fetch and push test files
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
Code clean-up.
* dk/blame-janitorial:
builtin/blame.c::find_copy_in_blob: no need to scan for region end
blame.c: prepare_lines should not call xrealloc for every line
builtin/blame.c::prepare_lines: fix allocation size of sb->lineno
builtin/blame.c: eliminate same_suspect()
builtin/blame.c: struct blame_entry does not need a prev link
Teach "--gpg-sign" option to many commands that create commits.
* bc/gpg-sign-everywhere:
pull: add the --gpg-sign option.
rebase: add the --gpg-sign option
rebase: parse options in stuck-long mode
rebase: don't try to match -M option
rebase: remove useless arguments check
am: add the --gpg-sign option
am: parse options in stuck-long mode
git-sh-setup.sh: add variable to use the stuck-long mode
cherry-pick, revert: add the --gpg-sign option
A handful of documentation updates, all trivially harmless.
* al/docs:
docs/git-blame: explain more clearly the example pickaxe use
docs/git-clone: clarify use of --no-hardlinks option
docs/git-remote: capitalize first word of initial blurb
docs/merge-strategies: remove hyphen from mis-merges
Avoid having to assign port number to be used in tests manually.
* jk/test-ports:
tests: auto-set git-daemon port
tests: auto-set LIB_HTTPD_PORT from test name
* ks/tree-diff-walk:
tree-walk: finally switch over tree descriptors to contain a pre-parsed entry
revision: convert to using diff_tree_sha1()
line-log: convert to using diff_tree_sha1()
tree-diff: convert diff_root_tree_sha1() to just call diff_tree_sha1 with old=NULL
tree-diff: allow diff_tree_sha1 to accept NULL sha1
All subcommands that take pathspecs mishandled an in-tree symbolic
link when given it as a full path from the root (which arguably is
a sick way to use pathspecs). "git ls-files -s $(pwd)/RelNotes" in
our tree is an easy reproduction recipe.
* mw/symlinks:
setup: don't dereference in-tree symlinks for absolute paths
setup: add abspath_part_inside_repo() function
t0060: add tests for prefix_path when path begins with work tree
t0060: add test for prefix_path when path == work tree
t0060: add test for prefix_path on symlinks via absolute paths
t3004: add test for ls-files on symlinks via absolute paths
Make sure 'submodule update' modes that do not detach HEADs can
be used more pleasantly by checking out a concrete branch when
cloning them to prime the well.
* wk/submodule-on-branch:
Documentation: describe 'submodule update --remote' use case
submodule: explicit local branch creation in module_clone
submodule: document module_clone arguments in comments
submodule: make 'checkout' update_module mode more explicit
Shrink lifetime of variables by moving their definitions to an
inner scope where appropriate.
* ep/varscope:
builtin/gc.c: reduce scope of variables
builtin/fetch.c: reduce scope of variable
builtin/commit.c: reduce scope of variables
builtin/clean.c: reduce scope of variable
builtin/blame.c: reduce scope of variables
builtin/apply.c: reduce scope of variables
bisect.c: reduce scope of variable
When we replace broken macros from stdio.h in git-compat-util.h,
preprocessor.
* bs/stdio-undef-before-redef:
git-compat-util.h: #undef (v)snprintf before #define them
include.path variable (or any variable that expects a path that can
use ~username expansion) in the configuration file is not a
boolean, but the code failed to check it.
* jk/config-path-include-fix:
handle_path_include: don't look at NULL value
expand_user_path: do not look at NULL path
"git rev-parse --default" without the required option argument did
not diagnose it as an error.
* ds/rev-parse-required-args:
rev-parse: check i before using argv[i] against argc
"git diff --quiet -- pathspec1 pathspec2" sometimes did not return
correct status value.
* nd/diff-quiet-stat-dirty:
diff: do not quit early on stat-dirty files
diff.c: move diffcore_skip_stat_unmatch core logic out for reuse later
Allow "git cmd path/", when the 'path' is where a submodule is
bound to the top-level working tree, to match 'path', despite the
extra and unnecessary trailing slash.
* nd/submodule-pathspec-ending-with-slash:
clean: use cache_name_is_other()
clean: replace match_pathspec() with dir_path_match()
pathspec: pass directory indicator to match_pathspec_item()
match_pathspec: match pathspec "foo/" against directory "foo"
dir.c: prepare match_pathspec_item for taking more flags
pathspec: rename match_pathspec_depth() to match_pathspec()
pathspec: convert some match_pathspec_depth() to dir_path_match()
pathspec: convert some match_pathspec_depth() to ce_path_match()
Allow "merge-recursive" to work in an empty (temporary) working
tree again when there are renames involved, correcting an old
regression in 1.7.7 era.
* bk/refresh-missing-ok-in-merge-recursive:
merge-recursive.c: tolerate missing files while refreshing index
read-cache.c: extend make_cache_entry refresh flag with options
read-cache.c: refactor --ignore-missing implementation
t3030-merge-recursive: test known breakage with empty work tree
"git pull" learned to pay attention to pull.ff configuration
variable.
* da/pull-ff-configuration:
pull: add --ff-only to the help text
pull: add pull.ff configuration
Improvements to our hash table to get it to meet the needs of the
msysgit fscache project, with some nice performance improvements.
* kb/fast-hashmap:
name-hash: retire unused index_name_exists()
hashmap.h: use 'unsigned int' for hash-codes everywhere
test-hashmap.c: drop unnecessary #includes
.gitignore: test-hashmap is a generated file
read-cache.c: fix memory leaks caused by removed cache entries
builtin/update-index.c: cleanup update_one
fix 'git update-index --verbose --again' output
remove old hash.[ch] implementation
name-hash.c: remove cache entries instead of marking them CE_UNHASHED
name-hash.c: use new hash map implementation for cache entries
name-hash.c: remove unreferenced directory entries
name-hash.c: use new hash map implementation for directories
diffcore-rename.c: use new hash map implementation
diffcore-rename.c: simplify finding exact renames
diffcore-rename.c: move code around to prepare for the next patch
buitin/describe.c: use new hash map implementation
add a hashtable implementation that supports O(1) removal
submodule: don't access the .gitmodules cache entry after removing it
Introduce commit.gpgsign configuration variable to force every
commit to be GPG signed. The variable cannot be overriden from the
command line of some of the commands that create commits except for
"git commit" and "git commit-tree", but I am not convinced that it
is a good idea to sprinkle support for --no-gpg-sign everywhere,
which in turn means that this configuration variable may not be
such a good idea.
* nv/commit-gpgsign-config:
test the commit.gpgsign config option
commit-tree: add and document --no-gpg-sign
commit-tree: add the commit.gpgsign option to sign all commits
db5360f3f4 (name-hash: refactor polymorphic index_name_exists();
2013-09-17) split index_name_exists() into index_file_exists() and
index_dir_exists() but retained index_name_exists() as a thin wrapper
to avoid disturbing possible in-flight topics. Since this change
landed in 'master' some time ago and there are no in-flight topics
referencing index_name_exists(), retire it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests are checking that :
- when commit.gpgsign is true, "git commit" creates signed commits
- when commit.gpgsign is false, "git commit" creates unsigned commits
- when commit.gpgsign is true, "git commit --no-gpg-sign" creates
unsigned commits
- when commit.gpgsign is true, "git rebase -f" creates signed commits
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how to override commit.gpgsign configuration that is set to
true per "git commit" invocation (parse-options machinery lets us
say "--no-gpg-sign" to do so).
"git commit-tree" does not use parse-options, so manually add the
corresponding option for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you want to GPG sign all your commits, you have to add the -S option
all the time. The commit.gpgsign config option allows to sign all
commits automatically.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When QUICK is set (i.e. with --quiet) we try to do as little work as
possible, stopping after seeing the first change. stat-dirty is
considered a "change" but it may turn out not, if no actual content is
changed. The actual content test is performed too late in the process
and the shortcut may be taken prematurely, leading to incorrect return
code.
Assume we do "git diff --quiet". If we have a stat-dirty file "a" and
a really dirty file "b". We break the loop in run_diff_files() and
stop after "a" because we have got a "change". Later in
diffcore_skip_stat_unmatch() we find out "a" is actually not
changed. But there's nothing else in the diff queue, we incorrectly
declare "no change", ignoring the fact that "b" is changed.
This also happens to "git diff --quiet HEAD" when it hits
diff_can_quit_early() in oneway_diff().
This patch does the content test earlier in order to keep going if "a"
is unchanged. The test result is cached so that when
diffcore_skip_stat_unmatch() is done in the end, we spend no cycles on
re-testing "a".
Reported-by: IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
