Sparse checkout narrows worktree down based on the skip-worktree bit
before and after $GIT_DIR/info/sparse-checkout application. If it does
not have that bit before but does after, a narrow is detected and the
file will be removed from worktree.
New files added by merge, however, does not have skip-worktree bit. If
those files appear to be outside checkout area, the same rule applies:
the file gets removed from worktree even though they don't exist in
worktree.
Just pretend they have skip-worktree before in that case, so the rule
is ignored.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of sparse checkout is conflict entries should always stay
in worktree, regardless $GIT_DIR/info/sparse-checkout. Therefore,
ce_stage(ce) usually means no CE_SKIP_WORKTREE. This is true when all
entries have been merged into the index, and identical staged entries
collapsed.
However, will_have_skip_worktree() since f1f523e (unpack-trees():
ignore worktree check outside checkout area) is also used earlier in
verify_* functions, where entries have not been merged to index yet
and ce_stage() is not zero. Checking ce_stage() then may provoke
unnecessary verification on entries outside checkout area and error
out.
This fixes part of test case "read-tree adds to worktree, dirty case".
The error
error: Untracked working tree file 'sub/added' would be overwritten by merge.
is now gone and (unfortunately) replaced by another error, which will
be addressed in the next patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid touching the worktree outside a sparse checkout,
when the update flag is enabled unpack_trees() clears the
CE_UPDATE and CE_REMOVE flags on entries that do not match the
sparse pattern before actually committing any updates to the
index file or worktree.
The effect on the index was unintentional; sparse checkout was
never meant to prevent index updates outside the area checked
out. And the result is very confusing: for example, after a
failed merge, currently "git reset --hard" does not reset the
state completely but an additional "git reset --mixed" will.
So stop clearing the CE_REMOVE flag. Instead, maintain a
CE_WT_REMOVE flag to separately track whether a particular
file removal should apply to the worktree in addition to the
index or not.
The CE_WT_REMOVE flag is used already to mark files that
should be removed because of a narrowing checkout area. That
usage will still apply; do not clear the CE_WT_REMOVE flag
in that case (detectable because the CE_REMOVE flag is not
set).
This bug masked some other bugs illustrated by the test
suite, which will be addressed by later patches.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Fixes: http://bugs.debian.org/583699
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of this clearing is, as explained in comment, because
verify_*() may set those bits before apply_sparse_checkout() is
called. By that time, it's not clear whether an entry will stay in
checkout area or out. After $GIT_DIR/info/sparse-checkout is applied,
we know what entries will be in finally. It's time to clean unwanted
bits.
That works perfectly when checkout area remains unchanged. When
checkout area changes, apply_sparse_checkout() may set CE_UPDATE
or CE_WT_REMOVE to widen/narrow checkout area. Doing the clearing
after apply_sparse_checkout() may clear those widening/narrowing
bits unexpectedly.
So, only do that on entries that are not affected by checkout area
changes (i.e. skip-worktree bit does not change after
apply_sparse_checkout).
This code does not actually fix anything though, just
future-proof. The removed code and the narrow/widen code inside
apply_sparse_checkout are currently independent (narrow code never
sets CE_REMOVE, widen code sets CE_UPDATE, but ce_skip_worktree()
would be false).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the rest of the script to more closely follow the test
style guide. Guarding setup commands with test_expect_success
makes it easy to see the scope in which some particular data is
used; removal of whitespace after >redirection operators is just
for consistency.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not double-backslash we forbid; backslashes are forbidden since
a4c2e699 (Disallow '\' in ref names, 2009-05-08)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git-archive takes attributes from the tree being archived.
People however often wonder why their attempts to affect the way how the
command archives their tree by changing .gitattributes in their work tree
fail.
Add a bit of explanatory note to tell them how to achieve what they want
to do.
Noticed-by: Francois Marier
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running filter-branch with --prune-empty and --commit-filter reports:
"Cannot set --prune-empty and --filter-commit at the same time".
Change it to use the correct option name: --commit-filter
Signed-off-by: Jacob Helwig <jacob.helwig@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rebase calls this same function "--continue", which means
users may be trained to type it. There is no reason to
deprecate --resolved (or -r), so we will keep it as a
synonym.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shell reports exit status only from the most downstream command
in a pipeline. In these tests, we want to make sure that the
command fails in a controlled way, and produces a correct error
message.
This issue was known by Jay who submitted the patch, and also was
pointed out by Hannes during the review process, but I forgot to
fix it up before applying. Sorry about that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-reflog-bad-timestamp:
t0101: use a fixed timestamp when searching in the reflog
Update @{bogus.timestamp} fix not to die()
approxidate_careful() reports errorneous date string
The last item in the enumerated refname rule was mistakenly made into
a sub-item of the 7th one. It should be the 8th one in the list on its
own.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lack of quoting made the entire line disappear.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
8424981: "Fix invalid read in quote_c_style_counted" introduced a test
that used "caractère spécial" as a directory name.
Git creates it as "caract\303\250re sp\303\251cial"
OS X stores it as "caracte\314\200re spe\314\201cial"
To work around this problem, use the already introduced $FN as the
directory name.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
blame: prevent a segv when -L given start > EOF
git-push: document all the status flags used in the output
Fix parsing of imap.preformattedHTML and imap.sslverify
git-add documentation: Fix shell quoting example
blame would segv if given -L <lineno> with <lineno> past the end of the file.
While we're fixing the bug, add test cases for an invalid <start> when called
as -L <start>,<end> or -L<start>.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two variables are boolean and can lack "= value" in the
configuration file. Do not reject such input early in the
parser callback function.
Also the key are downcased before being given to the callback,
so we should run strcmp() with keyword spelled in all-lowercase.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 921177f (Documentation: improve "add", "pull" and "format-patch"
examples, 2008-05-07) converted this from enumeration header to displayed
text, it failed to adjust for the AsciiDoc's rule to quote backslashes.
In displayed text, backslash is shown verbatim, while in enumeration
header, we need to double it.
We have a similar construct in git-rm.txt documentation, and need to be
careful when somebody wants to update it to match the style of the "git
add" example.
Noticed by: Greg Bacon <gbacon@dbresearch.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts most of commit a2430dde8c.
That commit made the situation better for repositories with relatively
small number of objects. However with many objects and a small pack size
limit, the time required to complete the repack tends towards O(n^2),
or even much worse with long delta chains.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: update french translation
git-gui: update Japanese translation
git-gui: fix shortcut for menu "Commit/Revert Changes"
git-gui: Quote git path when starting another gui in a submodule
git-gui: update Italian translation
git-gui: Update Swedish translation (520t0f0u)
git-gui: use themed tk widgets with Tk 8.5
git-gui: Update German translation (12 new or changed strings).
git-gui: Update translation template
git-gui: Remove unused icon file_parttick
git-gui: use different icon for new and modified files in the index
git-gui: set GIT_DIR and GIT_WORK_TREE after setup
git-gui: update shortcut tools to use _gitworktree
git-gui: handle bare repos correctly
git-gui: handle non-standard worktree locations
git-gui: Support applying a range of changes at once
git-gui: Add a special diff popup menu for submodules
git-gui: Use git diff --submodule when available
The code to guess an output archive's format consumed any --format
options and built a new one. Jonathan noticed that it does so in an
unsafe way, risking to overflow the static buffer fmt_opt.
Change the code to keep the existing --format options intact and to only
add a new one if a format could be guessed based on the output file name.
The new option is added as the first one, allowing the existing ones to
overrule it, i.e. explicit --format options given on the command line win
over format guesses, as before.
To simplify the code further, format_from_name() is changed to return the
full --format option, thus no potentially dangerous sprintf() calls are
needed any more.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function did not work on strings that were not NUL-terminated. It
reads through a length-bounded string, searching for characters in need of
quoting. After we find one, we output the quoted character, then advance
our pointer to find the next one. However, we never decremented the
length, meaning we ended up looking at whatever random junk was stored
after the string.
This bug was not found by the existing tests because most code paths feed
a NUL-terminated string. The notable exception is a directory name being
fed by ls-tree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a quoted path, update-index will correctly
unquote it. However, we must take care to put our new prefix
inside the double-quote.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revert the previous attempt to skip this test on platforms where we
currently cannot determine the system load. We want to make sure that
the max-load-limit codepath produces results cleanly, when gitweb is
updated and becomes capable of reading the load average by some other
method.
The code to check for load returns 0 if it doesn't know how to find
load. It also checks to see if the current load is higher than the
max load. So to force the script to quit early by setting the maxload
variable negative which should work for systems where we can detect
load (which should be a positive number) and systems where we can't
(where detected load is 0)
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently gitweb only knows how to check for load using /proc/loadavg,
which isn't available on all systems. We shouldn't fail the test just
because we don't know how to check the system load.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
