* jk/repack-pack-keep-objects:
repack: s/write_bitmap/&s/ in code
repack: respect pack.writebitmaps
repack: do not accidentally pack kept objects by default
We create a directory that cannot be removed, confirm that
it cannot be removed, and then fix it like:
chmod 0 foo &&
test_must_fail git clean -d -f &&
chmod 755 foo
If the middle step fails but leaves the directory (e.g., the
bug is that clean does not notice the failure), this
pollutes the test repo with an unremovable directory. Not
only does this cause further tests to fail, but it means
that "rm -rf" fails on the whole trash directory, and the
user has to intervene manually to even re-run the test script.
We can bump the "chmod 755" recovery to a test_when_finished
block to be sure that it always runs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" (and "git commit") behaved as if changes in a modified
submodule are not there if submodule.*.ignore configuration is set,
which was misleading. The configuration is only to unclutter diff
output during the course of development, and should not to hide
changes in the "status" output to cause the users forget to commit
them.
* jl/status-added-submodule-is-never-ignored:
commit -m: commit staged submodules regardless of ignore config
status/commit: show staged submodules regardless of ignore config
"git status", even though it is a read-only operation, tries to
update the index with refreshed lstat(2) info to optimize future
accesses to the working tree opportunistically, but this could
race with a "read-write" operation that modify the index while it
is running. Detect such a race and avoid overwriting the index.
* ym/fix-opportunistic-index-update-race:
read-cache.c: verify index file before we opportunistically update it
wrapper.c: add xpread() similar to xread()
"git show -s" (i.e. show log message only) used to incorrectly emit
an extra blank line after a merge commit.
* mk/show-s-no-extra-blank-line-for-merges:
git-show: fix 'git show -s' to not add extra terminator after merge commit
The autostash mode of "git rebase -i" did not restore the dirty
working tree state if the user aborted the interactive rebase by
emptying the insn sheet.
* rr/rebase-autostash-fix:
rebase -i: test "Nothing to do" case with autostash
rebase -i: handle "Nothing to do" case with autostash
"git log --exclude=<glob> --all | git shortlog" worked as expected,
but "git shortlog --exclude=<glob> --all", which is supposed to be
identical to the above pipeline, was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
"git remote rm" and "git remote prune" can involve removing many
refs at once, which is not a very efficient thing to do when very
many refs exist in the packed-refs file.
* jl/remote-rm-prune:
remote prune: optimize "dangling symref" check/warning
remote: repack packed-refs once when deleting multiple refs
remote rm: delete remote configuration as the last
"git rerere forget" did not work well when merge.conflictstyle
was set to a non-default value.
* fc/rerere-conflict-style:
rerere: fix for merge.conflictstyle
"git pack-objects" unnecessarily copied the previous contents when
extending the hashtable, even though it will populate the table
from scratch anyway.
* rs/pack-objects-no-unnecessary-realloc:
pack-objects: use free()+xcalloc() instead of xrealloc()+memset()
On a case insensitive filesystem, merge-recursive incorrectly
deleted the file that is to be renamed to a name that is the same
except for case differences.
* dt/merge-recursive-case-insensitive:
mv: allow renaming to fix case on case insensitive filesystems
merge-recursive.c: fix case-changing merge bug
"git mailinfo" used to read beyond the end of header string while
parsing an incoming e-mail message to extract the patch.
* rs/mailinfo-header-cmp:
mailinfo: use strcmp() for string comparison
The error reporting from "git index-pack" has been improved to
distinguish missing objects from type errors.
* jk/index-pack-report-missing:
index-pack: distinguish missing objects from type errors
We used to disable threaded "git index-pack" on platforms without
thread-safe pread(); use a different workaround for such
platforms to allow threaded "git index-pack".
* nd/index-pack-one-fd-per-thread:
index-pack: work around thread-unsafe pread()
"git grep -O" to show the lines that hit in the pager did not work
well with case insensitive search. We now spawn "less" with its
"-I" option when it is used as the pager (which is the default).
* sk/spawn-less-case-insensitively-from-grep-O-i:
git grep -O -i: if the pager is 'less', pass the '-I' option
"git gc --auto" was recently changed to run in the background to
give control back early to the end-user sitting in front of the
terminal, but it forgot that housekeeping involving reflogs should
be done without other processes competing for accesses to the refs.
* nd/daemonize-gc:
gc --auto: do not lock refs in the background
"git format-patch" did not enforce the rule that the "--follow"
option from the log/diff family of commands must be used with
exactly one pathspec.
* jk/diff-follow-must-take-one-pathspec:
move "--follow needs one pathspec" rule to diff_setup_done
"git diff --find-copies-harder" sometimes pretended as if the mode
bits have changed for paths that are marked with assume-unchanged
bit.
* jk/diff-files-assume-unchanged:
run_diff_files: do not look at uninitialized stat data
"git commit --allow-empty-message -C $commit" did not work when the
commit did not have any log message.
* jk/commit-C-pick-empty:
commit: do not complain of empty messages from -C
"git blame" assigned the blame to the copy in the working-tree if
the repository is set to core.autocrlf=input and the file used CRLF
line endings.
* bc/blame-crlf-test:
blame: correctly handle files regardless of autocrlf
"git blame" miscounted number of columns needed to show localized
timestamps, resulting in jaggy left-side-edge of the source code
lines in its output.
* jx/blame-align-relative-time:
blame: dynamic blame_date_width for different locales
blame: fix broken time_buf paddings in relative timestamp
"--ignore-space-change" option of "git apply" ignored the spaces
at the beginning of line too aggressively, which is inconsistent
with the option of the same name "diff" and "git diff" have.
* jc/apply-ignore-whitespace:
apply --ignore-space-change: lines with and without leading whitespaces do not match
The completion scripts (in contrib/) did not know about quite a few
options that are common between "git merge" and "git pull", and a
couple of options unique to "git merge".
* jk/complete-merge-pull:
completion: add missing options for git-merge
completion: add a note that merge options are shared
The "mailmap.file" configuration option did not support the tilde
expansion (i.e. ~user/path and ~/path).
* ow/config-mailmap-pathname:
config: respect '~' and '~user' in mailmap.file
The "%<(10,trunc)%s" pretty format specifier in the log family of
commands is used to truncate the string to a given length (e.g. 10
in the example) with padding to column-align the output, but did
not take into account that number of bytes and number of display
columns are different.
* as/pretty-truncate:
pretty.c: format string with truncate respects logOutputEncoding
t4205, t6006: add tests that fail with i18n.logOutputEncoding set
t4205 (log-pretty-format): use `tformat` rather than `format`
t4041, t4205, t6006, t7102: don't hardcode tested encoding value
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
Reworded the error message given upon a failure to open an existing
loose object file due to e.g. permission issues; it was reported as
the object being corrupt, but that is not quite true.
* jk/report-fail-to-read-objects-better:
open_sha1_file: report "most interesting" errno
Tools that read diagnostic output in our standard error stream do
not want to see terminal control sequence (e.g. erase-to-eol).
Detect them by checking if the standard error stream is connected
to a tty.
* mn/sideband-no-ansi:
sideband.c: do not use ANSI control sequence on non-terminal
We used to unconditionally disable the pager in the pager process
we spawn to feed out output, but that prevented people who want to
run "less" within "less" from doing so.
* je/pager-do-not-recurse:
pager: do allow spawning pager recursively
The "git submodule sync" command supports the --recursive flag, but
the documentation does not mention this. That flag is useful, for
example when a remote is changed in a submodule of a submodule.
Signed-off-by: Matthew Chen <charlesmchen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original used to pass with /bin/dash but not with /bin/bash set
to $SHELL_PATH. The former turns "\\" into "\", but the latter does
not.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not C. The code would break under mksh when 'pull.ff' is set:
$ git pull
/usr/lib/git-core/git-pull[67]: break: can't break
Already up-to-date.
Signed-off-by: Jacek Konieczny <jajcus@jajcus.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config name is "writeBitmaps", so the internal variable
missing the plural is unnecessarily confusing to write.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config option to turn on bitmaps is read all the way
down in the plumbing of pack-objects. This makes it hard for
other options in the porcelain of repack to make decisions
based on the bitmap setting. For example,
repack.packKeptObjects tries to kick in by default only when
bitmaps are turned on. But it can't do so reliably because
it doesn't yet know whether we are using bitmaps.
This patch teaches repack to respect pack.writebitmaps. It
means we pass a redundant command-line flag to pack-objects,
but that's OK; it shouldn't affect the outcome.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ee34a2b (repack: add `repack.packKeptObjects` config
var, 2014-03-03) added a flag which could duplicate kept
objects, but did not mean to turn it on by default. Instead,
the option is tied by default to the decision to write
bitmaps, like:
if (pack_kept_objects < 0)
pack_kept_objects = write_bitmap;
after which we expect pack_kept_objects to be a boolean 0 or
1. However, that assignment neglects that write_bitmap is
_also_ a tri-state with "-1" as the default, and with
neither option given, we accidentally turn the option on.
This patch is the minimal fix to restore the desired
behavior for the default state. Further patches will fix the
more complicated cases.
Note the update to t7700. It failed to turn on bitmaps,
meaning we were actually confirming the wrong behavior!
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mistyped command line simply ignores "master" and ends up
showing two commits from the current HEAD:
$ git log -2master
because we feed "2master" to atoi() without making sure that the
whole string is parsed as an integer.
Use the strtol_i() helper function instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two commands are supposed to be equivalent:
$ git log --exclude=refs/notes/\* --all --no-merges --since=2.days |
git shortlog
$ git shortlog --exclude=refs/notes/\* --all --no-merges --since=2.days
However, the latter does not understand the ref-exclusion command
line option, even though other options understood by "log", such as
"--all" and "--no-merges", are understood.
This was because e7b432c5 (revision: introduce --exclude=<glob> to
tame wildcards, 2013-08-30) did not wire the new option fully to the
machinery. A new option understood by handle_revision_pseudo_opt()
must be told to handle_revision_opt() as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git update-index --cacheinfo" without any further
arguments results in a segfault rather than an error
message. Commit ec160ae (update-index: teach --cacheinfo a
new syntax "mode,sha1,path", 2014-03-23) added code to
examine the format of the argument, but forgot to handle the
NULL case.
Returning an error from the parser is enough, since we then
treat it as an old-style "--cacheinfo <mode> <sha1> <path>",
and complain that we have less than 3 arguments to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Discard the unnecessary 'nr_spaces' variable, remove 'strlen()' and
improve the 'if' structure. Switch to pointers instead of integers
to control the loop.
Slightly more rare occurrences of 'text \ ' with a backslash
in between spaces are handled correctly. Namely, the code in
7e2e4b37 (dir: ignore trailing spaces in exclude patterns, 2014-02-09)
does not reset 'last_space' when a backslash is encountered and the above
line stays intact as a result.
Add a test at the end of t/t0008-ignores.sh to exhibit this behavior.
Signed-off-by: Pasha Bolokhov <pasha.bolokhov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever the hash table becomes too small then its size is increased,
the original part (and the added space) is zerod out using memset(),
and the table is rebuilt from scratch.
Simplify this proceess by returning the old memory using free() and
allocating the new buffer using xcalloc(), which already clears the
buffer for us. That way we avoid copying the old hash table contents
needlessly inside xrealloc().
While at it, use the first array member with sizeof instead of a
specific type. The old code used uint32_t and int, while index is
actually an array of int32_t. Their sizes are the same basically
everywhere, so it's not actually a problem, but the new code is
cleaner and doesn't have to be touched should the type be changed.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The array header is defined as:
static const char *header[MAX_HDR_PARSED] = {
"From","Subject","Date",
};
When looking for the index of a specfic string in that array, simply
use strcmp() instead of memcmp(). This avoids running over the end of
the string (e.g. with memcmp("Subject", "From", 7)) and gets rid of
magic string length constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Diagnostic messages received on the sideband #2 from the server side
are sent to the standard error with ANSI terminal control sequence
"\033[K" that erases to the end of line appended at the end of each
line.
However, some programs (e.g. GitExtensions for Windows) read and
interpret and/or show the message without understanding the terminal
control sequences, resulting them to be shown to their end users.
To help these programs, squelch the control sequence when the
standard error stream is not being sent to a tty.
NOTE: I considered to cover the case that a pager has already been
started. But decided that is probably not worth worrying about here,
though, as we shouldn't be using a pager for commands that do network
communications (and if we do, omitting the magic line-clearing signal
is probably a sane thing to do).
Thanks-to: Erik Faye-Lund <kusmabite@gmail.com>
Thanks-to: Jeff King <peff@peff.net>
Signed-off-by: Michael Naumov <mnaoumov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
