Finishing touches to the new test script.
* dg/submodule-in-dismembered-working-tree:
t7409: make sure submodule is initialized and updated in more detail
The earlier test did not even make sure that the correct commit is
checked out in the submodule directory. Inspect the result in a bit
more detail.
Signed-off-by: Daniel Graña <dangra@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to avoid mistaken attempt to add the object directory
itself as its own alternate could read beyond end of a string while
comparison.
* hv/link-alt-odb-entry:
link_alt_odb_entry: fix read over array bounds reported by valgrind
The patch below adds a comment to fetch_with_import() explaining the
loop that saves the fetched commit names after 'git fast-import' has
done its work. It avoids some confusion about which refs the
fast-import stream is supposed to use to write its result.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, the final test ('flags and then non flags') fails
intermittently, depending on how much time elapsed between the
invocations of "git commit-tree" when creating the commits which
later have their commit id's compared. For example, if the commits
for childid-3 and childid-4 are created 1 or more seconds apart,
then the commits, which would otherwise be identical, will have
different commit id's.
In order to make the test reproducible, we remove the variability
by setting the author and committer times to a well defined state.
We accomplish this with a single call to 'test_tick' at the start
of the test.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pfxlen can be longer than the path in objdir when relative_base
contains the path to gits object directory. Here we are interested
in checking if ent->base[] (the part that corresponds to .git/objects)
is the same string as objdir, and the code NUL-terminated ent->base[]
to
LEADING PATH\0XX/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\0
in preparation for these "duplicate check" step (before we return
from the function, the first NUL is turned into '/' so that we can
fill XX when probing for loose objects). All we need to do is to
compare the string with the path to our object directory.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'extract-remaining' of git://git.bogomips.org/git-svn:
Extract Git::SVN::GlobSpec from git-svn.
Move Git::IndexInfo into its own file.
Load all the modules in one place and before running code.
Extract Git::SVN::Migration from git-svn.
Prepare Git::SVN::Migration for extraction from git-svn.
Extract Git::SVN::Log from git-svn.
Prepare Git::SVN::Log for extraction from git-svn.
* git://git.bogomips.org/git-svn:
Move initialization of Git::SVN variables into Git::SVN.
Extract Git::SVN from git-svn into its own .pm file.
Prepare Git::SVN for extraction into its own file.
Extract some utilities from git-svn to allow extracting Git::SVN.
perl: detect new files in MakeMaker builds
The Makefile.PL will now find .pm files itself.
Don't lose Error.pm if $@ gets clobbered.
Quiet warning if Makefile.PL is run with -w and no --localedir
Fix test breakages by a builder who does not have a valid user name
in his /etc/password entry.
* jk/autoident-test:
t7502: test early quit from commit with bad ident
t7502: handle systems where auto-identity is broken
t7502: drop confusing test_might_fail call
t7502: narrow checks for author/committer name in template
t7502: properly quote GIT_EDITOR
t7502: clean up fake_editor tests
In a superproject that has repository outside of its working tree,
"git submodule add" failed to clone a new submodule, as GIT_DIR and
GIT_WORK_TREE environment variables necessary to work in such a
superproject interfered with access to the submodule repository.
* dg/submodule-in-dismembered-working-tree:
git-submodule: work with GIT_DIR/GIT_WORK_TREE
"git checkout <branchname>" to come back from a detached HEAD state
incorrectly computed reachability of the detached HEAD, resulting in
unnecessary warnings.
* jk/maint-checkout-orphan-check-fix:
checkout: don't confuse ref and object flags
Straight cut & paste. That's the last class.
* Make Git::SVN load it on its own, its the only thing that needs it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* Load Git command functions on its own.
* Load Git::SVN modules on its own.
Drive by refactorings...
* Use our() instead of use vars.
* Eliminate the auto loading of Git functions.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* Load Git command functions itself.
* Can't access the git-svn switch lexical any more, but its only used by
Git::SVN::Log so turn it into a Git::SVN::Log global.
* Load Git::SVN as needed. No need to load it always, its only used twice.
* Moved a state variable to the routine it's used for. (Drive by refactoring)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Except for adding the 1; at the end, this is a straight copy & paste.
Tests still pass, but its doubtful Git::SVN will compile on its own
without git-svn being loaded. Next commit will fix that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This means it should be able to load without git-svn being loaded.
* Load Git.pm on its own and all the needed command functions.
* It needs to grab at a git-svn lexical $_prefix representing the --prefix
option. Provide opt_prefix() for that. This is a refactoring artifact.
The prefix should really be passed into Git::SVN->new.
* Unqualify unnecessarily fully qualified globals like
$Git::SVN::default_repo_id.
* Lexically isolate the class just to make sure nothing is leaking out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Put them in a new module called Git::SVN::Utils. Yeah, not terribly
original and it will be a dumping ground. But its better than having
them in the main git-svn program. At least they can be documented
and tested.
* fatal() is used by many classes.
* Change the $can_compress lexical into a function.
This should be enough to extract Git::SVN.
Signed-off-by: Michael G. Schwern <schwern@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
While Makefile.PL now finds .pm files on its own, it does not
detect new files after it generates perl/perl.mak.
[ew: commit message, minor tweaks]
ref: http://mid.gmane.org/7vlii51xz4.fsf@alter.siamese.dyndns.org
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It is no longer necessary to manually add new .pm files to the
Makefile.PL. This makes it easier to add modules.
It is still necessary to add them to the Makefile, but that extra work
should be removed at a future date.
Signed-off-by: Michael G Schwern <schwern@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
In older Perls, sometimes $@ can become unset between the eval and
checking $@. Its safer to check the eval directly.
Signed-off-by: Michael G Schwern <schwern@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Usually it isn't, but its nice if it can be run with warnings on.
Signed-off-by: Michael G Schwern <schwern@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
In commit f20f387, "git commit" notices and dies much
earlier when we have a bogus commit identity. That commit
did not add a test because we cannot do so reliably (namely,
we can only trigger the behavior on a system where the
automatically generated identity is bogus). However, now
that we have a prerequisite check for this feature, we can
add a test that will at least run on systems that produce
such a bogus identity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test t7502.21 checks whether we write the committer name
into COMMIT_EDITMSG when it has been automatically
determined. However, not all systems can produce valid
automatic identities.
Prior to f20f387 (commit: check committer identity more
strictly), this test worked even when we did not have a
valid automatic identity, since it did not run the strict
test until after we had generated the template. That commit
tightened the check to fail early (since we would fail
later, anyway), meaning that systems without a valid GECOS
name or hostname would fail the test.
We cannot just work around this, because it depends on
configuration outside the control of the test script.
Therefore we introduce a new test_prerequisite to run this
test only on systems where automatic ident works at all.
As a result, we can drop the confusing test_must_fail bit
from the test. The intent was that by giving "git commit"
invalid input (namely, nothing to commit), that it would
stop at a predictable point, whether we had a valid identity
or not, from which we could view the contents of
COMMIT_EDITMSG. Since that assumption no longer holds, and
we can only run the test when we have a valid identity,
there is no reason not to let commit run to completion. That
lets us be more robust to other unforeseen failures.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t7502.20, we run "git commit" and check that it warns us
that the author and committer identity are not the same
(this is always the case in the test environment, since we
set up the idents differently).
Instead of actually making a commit, we have a clean index,
so the "git commit" we run will fail. This is marked as
might_fail, which is not really correct; it will always fail
since there is nothing to commit.
However, the only reason not to do a complete commit would
be to see the intermediate state of the COMMIT_EDITMSG file
when the commit is not completed. We don't need to care
about this, though; even a complete commit will leave
COMMIT_EDITMSG for us to view. By doing a real commit and
dropping the might_fail, we are more robust against other
unforeseen failures of "git commit" that might influence our
test result.
It might seem less robust to depend on the fact that "git
commit" leaves COMMIT_EDITMSG in place after a successful
commit. However, that brings this test in line with others
parts of the script, which make the same assumption.
Furthermore, if that ever does change, the right solution is
not to prevent commit from completing, but to set EDITOR to
a script that will record the contents we see. After all,
the point of these tests is to check what the user sees in
their EDITOR, so that would be the most direct test. For
now, though, we can continue to use the "shortcut" that
COMMIT_EDITMSG is left intact.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7502.20 and t7502.21 check that the author and committer
name are mentioned in the commit message template under
certain circumstances. However, they end up checking a much
larger and unnecessary portion of the template. Let's narrow
their checks to the specific lines.
While we're at it, let's give these tests more descriptive
names, so their purposes are more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests tries to ensure that editor is not run due
to an early failure. However, it needs to quote the pathname
of the trash directory used in $GIT_EDITOR, since git will
pass it along to the shell. In other words, the test would
pass whether the code was correct or not, since the unquoted
editor specification would never run.
We never noticed the problem because the code is indeed
correct, so git-commit never even tried to run the editor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using write_script saves us a few lines of code, and means
we consistently use $SHELL_PATH.
We can also drop the setting of the $pwd variable from
$(pwd). In the first instance, there is no reason to use it
(we can just use $(pwd) directly two lines later, since we
are interpolating the here-document). In the second
instance, it is totally pointless and probably just a
cut-and-paste from the first instance.
Finally, we can use a non-interpolating here document for
the final script, which saves some quoting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorders t/test-lib.sh so that we dot-source GIT-BUILD-OPTIONS that
records the shell and Perl the user told us to use with Git a lot
early, so that test-lib.sh script itself can use "$PERL_PATH" in
one of its early operations.
* jc/test-lib-source-build-options-early:
test-lib: reorder and include GIT-BUILD-OPTIONS a lot earlier
Finishing touches to the XDG support (new feature for 1.7.12) and
tests.
* mm/config-xdg:
t1306: check that XDG_CONFIG_HOME works
ignore: make sure we have an xdg path before using it
attr: make sure we have an xdg path before using it
test-lib.sh: unset XDG_CONFIG_HOME
When we are leaving a detached HEAD, we do a revision traversal to
check whether we are orphaning any commits, marking the commit we're
leaving as the start of the traversal, and all existing refs as
uninteresting.
Prior to commit 468224e5, we did so by calling for_each_ref, and
feeding each resulting refname to setup_revisions. Commit 468224e5
refactored this to simply mark the pending objects, saving an extra
lookup.
However, it confused the "flags" parameter to the each_ref_fn
clalback, which is about the flags we found while looking up the ref
with the object flag. Because REF_ISSYMREF ("this ref is a symbolic
ref, e.g. refs/remotes/origin/HEAD") happens to be the same bit
pattern as SEEN ("we have picked this object up from the pending
list and moved it to revs.commits list"), we incorrectly reported
that a commit previously at the detached HEAD will become
unreachable if the only ref that can reach the commit happens to be
pointed at by a symbolic ref.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combination of GIT_DIR and GIT_WORK_TREE can be used to manage
files in one directory hierarchy while keeping the repository that
keeps track of them outside the directory hierarchy. For example:
git init --bare /path/to/there
alias dotfiles="GIT_DIR=/path/to/there GIT_WORK_TREE=/path/to/here git"
cd /path/to/here
dotfiles add file
dotfiles commit -a -m "add /path/to/here/file"
...
lets you manage files under /path/to/here/ in the repository located
at /path/to/there.
git-submodule however fails to add submodules, as it is confused by
GIT_DIR and GIT_WORK_TREE environment variables when it tries to
work in the submodule, like so:
dotfiles submodule add http://path.to/submodule
fatal: working tree '/path/to/here' already exists.
Simply unsetting the environment where the command works on the
submodule is sufficient to fix this, as it has set things up so
that GIT_DIR and GIT_WORK_TREE do not even have to point at the
repository and the working tree of the submodule.
Signed-off-by: Daniel Graña <dangra@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command name removed from the list of commands via the exclusion
were overwritten and lost without being freed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We observe that the j-1 element can serve the same purpose as the i-1
element that we use in the strcmp(); it is either:
1. Exactly i-1, when the loop begins (and until we see a duplicate).
2. The same pointer that was stored at i-1 (if it was not a duplicate,
and we just copied it into place).
3. A pointer to an equivalent string (i.e., we rejected i-1 _because_
it was identical to j-1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was a bit hard to learn how <rev>^@, <rev>^! and various other
forms of range specifiers are used, because they were discussed
mostly in the prose part of the documentation, unlike various forms
of extended SHA-1 expressions that are listed in an enumerated list.
Also add a few more examples showing use of <rev>, <rev>..<rev> and
<rev>^! forms, stolen from a patch by Max Horn.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mergetool" did not support --tool-help option to give the list
of supported backends, like "git difftool" does.
* jc/mergetool-tool-help:
mergetool: support --tool-help option like difftool does
"git commit --amend" let the user edit the log message and then died
when the human-readable committer name was given insufficiently by
getpwent(3).
* jk/maint-commit-check-committer-early:
commit: check committer identity more strictly
The advise() function did not use varargs correctly to format
its message.
* jk/maint-advise-vaddf:
advice: pass varargs to strbuf_vaddf, not strbuf_addf
Running the http tests with valgrind does not work for two
reasons:
1. Apache complains about following the symbolic link from
git-http-backend to valgrind.sh.
2. Apache does not pass through the GIT_VALGRIND variable
to the backend CGI.
This patch fixes both problems. Unfortunately, there is a
slight hack we need to handle passing environment variables
through Apache. If we just tell it:
PassEnv GIT_VALGRIND
then Apache will complain when GIT_VALGRIND is not set. If
we try:
SetEnv GIT_VALGRIND ${GIT_VALGRIND}
then when GIT_VALGRIND is not set, it will pass through the
literal "${GIT_VALGRIND}". Instead, we now unconditionally
pass through GIT_VALGRIND from lib-httpd.sh into apache,
even if it is empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
