In a triangular workflow, each branch may have two distinct
points of interest: the @{upstream} that you normally pull
from, and the destination that you normally push to. There
isn't a shorthand for the latter, but it's useful to have.
For instance, you may want to know which commits you haven't
pushed yet:
git log @{push}..
Or as a more complicated example, imagine that you normally
pull changes from origin/master (which you set as your
@{upstream}), and push changes to your own personal fork
(e.g., as myfork/topic). You may push to your fork from
multiple machines, requiring you to integrate the changes
from the push destination, rather than upstream. With this
patch, you can just do:
git rebase @{push}
rather than typing out the full name.
The heavy lifting is all done by branch_get_push; here we
just wire it up to the "@{push}" syntax.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that most of the logic for our local get_upstream_branch
has been pushed into the generic branch_get_upstream, we can
fold the remainder into interpret_upstream_mark.
Furthermore, what remains is generic to any branch-related
"@{foo}" we might add in the future, and there's enough
boilerplate that we'd like to reuse it. Let's parameterize
the two operations (parsing the mark and computing its
value) so that we can reuse this for "@{push}" in the near
future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will be adding new mark types in the future, so separate
the suffix data from the logic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a triangular workflow, the place you pull from and the
place you push to may be different. As we have
branch_get_upstream for the former, this patch adds
branch_get_push for the latter (and as the former implements
@{upstream}, so will this implement @{push} in a future
patch).
Note that the memory-handling for the return value bears
some explanation. Some code paths require allocating a new
string, and some let us return an existing string. We should
provide a consistent interface to the caller, so it knows
whether to free the result or not.
We could do so by xstrdup-ing any existing strings, and
having the caller always free. But that makes us
inconsistent with branch_get_upstream, so we would prefer to
simply take ownership of the resulting string. We do so by
storing it inside the "struct branch", just as we do with
the upstream refname (in that case we compute it when the
branch is created, but there's no reason not to just fill
it in lazily in this case).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After calling stat_tracking_info, callers often want to
print the name of the upstream branch (in addition to the
tracking count). To do this, they have to access
branch->merge->dst[0] themselves. This is not wrong, as the
return value from stat_tracking_info tells us whether we
have an upstream branch or not. But it is a bit leaky, as we
make an assumption about how it calculated the upstream
name.
Instead, let's add an out-parameter that lets the caller
know the upstream name we found.
As a bonus, we can get rid of the unusual tri-state return
from the function. We no longer need to use it to
differentiate between "no tracking config" and "tracking ref
does not exist" (since you can check the upstream_name for
that), so we can just use the usual 0/-1 convention for
success/error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error-diagnosis logic in branch_get_upstream was copied
straight from sha1_name.c in the previous commit. However,
because we check all error cases and upfront and then later
diagnose them, the logic is a bit tangled. In particular:
- if branch->merge[0] is NULL, we may end up dereferencing
it for an error message (in practice, it should never be
NULL, so this is probably not a triggerable bug).
- We may enter the code path because branch->merge[0]->dst
is NULL, but we then start our error diagnosis by
checking whether our local branch exists. But that is
only relevant to diagnosing missing merge config, not a
missing tracking ref; our diagnosis may hide the real
problem.
Instead, let's just use a sequence of "if" blocks to check
for each error type, diagnose it, and return NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the previous commit introduced the branch_get_upstream
helper, there was one call-site that could not be converted:
the one in sha1_name.c, which gives detailed error messages
for each possible failure.
Let's teach the helper to optionally report these specific
errors. This lets us convert another callsite, and means we
can use the helper in other locations that want to give the
same error messages.
The logic and error messages come straight from sha1_name.c,
with the exception that we start each error with a lowercase
letter, as is our usual style (note that a few tests need
updated as a result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the information needed to find the @{upstream} of a
branch is included in the branch struct, but callers have to
navigate a series of possible-NULL values to get there.
Let's wrap that logic up in an easy-to-read helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the previous commit, we had to make sure that
read_config() was called before entering remote_get_1,
because we needed to pass pushremote_name by value. But now
that we pass a function, we can let remote_get_1 handle
loading the config itself, turning our wrappers into true
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When remote.c loads its config, it records the
branch.*.pushremote for the current branch along with the
global remote.pushDefault value, and then binds them into a
single value: the default push for the current branch. We
then pass this value (which may be NULL) to remote_get_1
when looking up a remote for push.
This has a few downsides:
1. It's confusing. The early-binding of the "current
value" led to bugs like the one fixed by 98b406f
(remote: handle pushremote config in any order,
2014-02-24). And the fact that pushremotes fall back to
ordinary remotes is not explicit at all; it happens
because remote_get_1 cannot tell the difference between
"we are not asking for the push remote" and "there is
no push remote configured".
2. It throws away intermediate data. After read_config()
finishes, we have no idea what the value of
remote.pushDefault was, because the string has been
overwritten by the current branch's
branch.*.pushremote.
3. It doesn't record other data. We don't note the
branch.*.pushremote value for anything but the current
branch.
Let's make this more like the fetch-remote config. We'll
record the pushremote for each branch, and then explicitly
compute the correct remote for the current branch at the
time of reading.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll want to use this logic as a fallback when looking up
the pushremote, so let's pull it out into its own function.
We don't technically need to make this available outside of
remote.c, but doing so will provide a consistent API with
pushremote_for_branch, which we will add later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we create each branch struct, we fill in the
"remote_name" field from the config, and then fill in the
actual "remote" field (with a "struct remote") based on that
name. However, it turns out that nobody really cares about
the latter field. The only two sites that access it at all
are:
1. git-merge, which uses it to notice when the branch does
not have a remote defined. But we can easily replace this
with looking at remote_name instead.
2. remote.c itself, when setting up the @{upstream} merge
config. But we don't need to save the "remote" in the
"struct branch" for that; we can just look it up for
the duration of the operation.
So there is no need to have both fields; they are redundant
with each other (the struct remote contains the name, or you
can look up the struct from the name). It would be nice to
simplify this, especially as we are going to add matching
pushremote config in a future patch (and it would be nice to
keep them consistent).
So which one do we keep and which one do we get rid of?
If we had a lot of callers accessing the struct, it would be
more efficient to keep it (since you have to do a lookup to
go from the name to the struct, but not vice versa). But we
don't have a lot of callers; we have exactly one, so
efficiency doesn't matter. We can decide this based on
simplicity and readability.
And the meaning of the struct value is somewhat unclear. Is
it always the remote matching remote_name? If remote_name is
NULL (i.e., no per-branch config), does the struct fall back
to the "origin" remote, or is it also NULL? These questions
will get even more tricky with pushremotes, whose fallback
behavior is more complicated. So let's just store the name,
which pretty clearly represents the branch.*.remote config.
Any lookup or fallback behavior can then be implemented in
helper functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call branch_get() to lookup or create a "struct
branch", we make sure the "merge" field is filled in so that
callers can access it. But the conditions under which we do
so are a little confusing, and can lead to two funny
situations:
1. If there's no branch.*.remote config, we cannot provide
branch->merge (because it is really just an application
of branch.*.merge to our remote's refspecs). But
branch->merge_nr may be non-zero, leading callers to be
believe they can access branch->merge (e.g., in
branch_merge_matches and elsewhere).
It doesn't look like this can cause a segfault in
practice, as most code paths dealing with merge config
will bail early if there is no remote defined. But it's
a bit of a dangerous construct.
We can fix this by setting merge_nr to "0" explicitly
when we realize that we have no merge config. Note that
merge_nr also counts the "merge_name" fields (which we
_do_ have; that's how merge_nr got incremented), so we
will "lose" access to them, in the sense that we forget
how many we had. But no callers actually care; we use
merge_name only while iteratively reading the config,
and then convert it to the final "merge" form the first
time somebody calls branch_get().
2. We set up the "merge" field every time branch_get is
called, even if it has already been done. This leaks
memory.
It's not a big deal in practice, since most code paths
will access only one branch, or perhaps each branch
only one time. But if you want to be pathological, you
can leak arbitrary memory with:
yes @{upstream} | head -1000 | git rev-list --stdin
We can fix this by skipping setup when branch->merge is
already non-NULL.
In addition to those two fixes, this patch pushes the "do we
need to setup merge?" logic down into set_merge, where it is
a bit easier to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read the remote config from disk, we update a
default_remote_name variable if we see branch.*.remote
config for the current branch. This isn't wrong, or even all
that complicated, but it is a bit simpler (because it
reduces our overall state) to just lazily compute the
default when we need it.
The ulterior motive here is that the push config uses a
similar structure, and _is_ much more complicated as a
result. That will be simplified in a future patch, and it's
more readable if the logic for remotes and push-remotes
matches.
Note that we also used default_remote_name as a signal that
the remote config has been loaded; after this patch, we now
use an explicit flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
The run-command interface was easy to abuse and make a pipe for us
to read from the process, wait for the process to finish and then
attempt to read its output, which is a pattern that lead to a
deadlock. Fix such uses by introducing a helper to do this
correctly (i.e. we need to read first and then wait the process to
finish) and also add code to prevent such abuse in the run-command
helper.
* jk/run-command-capture:
run-command: forbid using run_command with piped output
trailer: use capture_command
submodule: use capture_command
wt-status: use capture_command
run-command: introduce capture_command helper
wt_status: fix signedness mismatch in strbuf_read call
wt-status: don't flush before running "submodule status"
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
The split-index mode introduced at v2.3.0-rc0~41 was broken in the
codepath to protect us against a broken reimplementation of Git
that writes an invalid index with duplicated index entries, etc.
* tg/fix-check-order-with-split-index:
read-cache: fix reading of split index
"git fetch" that fetches a commit using the allow-tip-sha1-in-want
extension could have failed to fetch all the requested refs.
* jk/fetch-pack:
fetch-pack: remove dead assignment to ref->new_sha1
fetch_refs_via_pack: free extra copy of refs
filter_ref: make a copy of extra "sought" entries
filter_ref: avoid overwriting ref->old_sha1 with garbage
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
Recommend format-patch and send-email for those who want to submit
patches to this project.
* jc/submitting-patches-mention-send-email:
SubmittingPatches: encourage users to use format-patch and send-email
"git log --graph --no-walk A B..." is a otcnflicting request that
asks nonsense; no-walk tells us show discrete points in the
history, while graph asks to draw connections between these
discrete points. Forbid the combination.
* dj/log-graph-with-no-walk:
revision: forbid combining --graph and --no-walk
"git rev-list --bisect --first-parent" does not work (yet) and can
even cause SEGV; forbid it. "git log --bisect --first-parent"
would not be useful until "git bisect --first-parent" materializes,
so it is also forbidden for now.
* kd/rev-list-bisect-first-parent:
rev-list: refuse --first-parent combined with --bisect
Even though "git grep --quiet" is run merely to ask for the exit
status, we spawned the pager regardless. Stop doing that.
* ws/grep-quiet-no-pager:
grep: fix "--quiet" overwriting current output
The prompt script (in contrib/) did not show the untracked sign
when working in a subdirectory without any untracked files.
* ct/prompt-untracked-fix:
git prompt: use toplevel to find untracked files
The idea of this helper is that we want to save the current
value of a config variable and then restore it again after
the test completes. However, there's no point in actually
saving the value; it should always be restored to the string
"never" (which you can confirm by instrumenting
save_confirm to print the value it finds).
Let's just replace it with a single test_when_finished call.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests are not wrong, but it is much shorter and more
idiomatic to say "verbose" or "test_must_fail" rather than
printing our own messages on failure. Likewise, there is no
need to say "happy" at the end of a test; the test suite
takes care of that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since shell loops may drop the exit code of failed commands
inside the loop, some tests try to keep track of the status
by setting a variable. This can end up cumbersome and hard
to read; it is much simpler to just exit directly from the
loop using "return 1" (since each case is either in a helper
function or inside a test snippet).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are all cases where we do a setup step of the form:
for i in $foo; do
set_up $i || break
done &&
more_setup
would not notice a failure in set_up (because break always
returns a 0 exit code). These are just setup steps that we
do not expect to fail, but it does not hurt to be defensive.
Most can be fixed by converting the "break" to a "return 1"
(since we eval our tests inside a function for just this
purpose). A few of the loops are inside subshells, so we can
use just "exit 1" to break out of the subshell. And a few
can actually be made shorter by just unrolling the loop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking a list of file mtimes, we use a loop and break
out early from the loop if any entry does not match.
However, the exit code of a loop exited via break is always
0, meaning that the test will fail to notice we had a
mismatch. Since the loop is inside a function, we can fix
this by doing an early "return 1".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we test deleting notes, we run "git notes remove" in a
loop. However, the exit value of the loop will only reflect
the final note we process. We should break out of the loop
with a failing exit code as soon as we see a problem.
Note that we can call "exit 1" here without explicitly
creating a subshell, because the while loop on the
right-hand side of a pipe executes in its own implicit
subshell.
Note also that the "break" above does not suffer the same
problem; it is meant to exit the loop early at a certain
number of iterations. We can bump it into the conditional of
the loop to make this more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A loop like:
for f in one two; do
something $f ||
break
done
will correctly break out of the loop when we see a failure
of one item, but the resulting exit code will always be
zero. We can fix that by putting the loop into a function or
subshell, but in this case it is simpler still to just
unroll the loop. We do add a helper function, which
hopefully makes the end result even more readable (in
addition to being shorter).
Reported-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When copying the test repository, we try to detect whether
the copy succeeded. However, most of the heavy lifting is
done inside a for loop, where our "break" will lose the exit
code of the failing "cp". We can take advantage of the fact
that we are in a subshell, and just "exit 1" to break out
with a code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://ozlabs.org/~paulus/gitk:
gitk: Update .po files
gitk: l10n: Add Catalan translation
gitk: Fix typo in Russian translation
gitk: Remove tcl-format flag from a message that shouldn't have it
gitk: Pass --invert-grep option down to "git log"
gitk: Synchronize config file writes
gitk: Report errors in saving config file
gitk: Only write changed configuration variables
gitk: Enable mouse horizontal scrolling in diff pane
gitk: Default wrcomcmd to use --pretty=email
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the first look, a user may think the default version is "23". Even
with UNIX background, there's no reference anywhere close that may
indicate this is glob or regex.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
Test fixes.
* jk/test-annoyances:
t5551: make EXPENSIVE test cheaper
t5541: move run_with_cmdline_limit to test-lib.sh
t: pass GIT_TRACE through Apache
t: redirect stderr GIT_TRACE to descriptor 4
t: translate SIGINT to an exit
The transfer.hiderefs support did not quite work for smart-http
transport.
* jk/smart-http-hide-refs:
upload-pack: do not check NULL return of lookup_unknown_object
upload-pack: fix transfer.hiderefs over smart-http
