If you use scanf or sscanf to parse integers, your code probably
accepts bogus inputs. For example, builtin-grep (aka git-grep) uses
sscanf(scan, "%u", &num) to parse the integer argument to -A, -B, -C.
Currently, "-C 1,000" and "-C 4294967297" are both treated just like
"-C 1":
$ git-grep -h -C 4294967297 juggle
out and you may find it easier to switch back and forth if you
juggle multiple lines of development simultaneously. Of
course, you will pay the price of more disk usage to hold
The obvious fix is to use strtoul instead. But using a bare strtoul is
too messy, at least when done properly, so I've added a wrapper function.
The new function in the patch below belongs elsewhere if it would be
useful in replacing any of the four remaining uses of sscanf.
One final note: With this change, I get a slightly different
diagnostic depending on the context size:
$ ./git-grep -h -C 4294967296 juggle
fatal: 4294967296: invalid context length argument
[Exit 128]
$ ./git-grep -h -C 4294967295 juggle
grep: 4294967295: invalid context length argument
[Exit 1]
A common convention that makes it easy to identify the source
of a diagnostic is to include the program name before the first ":".
Whether that should be "git" or "git-grep" is another question.
Using "grep" or "fatal" is misleading.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes the same issue as 8bef6204, which became an issue again
after 31d0399c.
Besides, it is not really helpful to print just "GEN " (_without_
"perl.mak").
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I was trying to see who have been active recently to find GSoC
mentor candidates by running:
$ git shortlog -s -n --since=4.months | head -n 20
After waiting for about 20 seconds, I started getting worried,
thinking that the recent revision traversal updates might have
had an unintended side effect.
Not so. "git shortlog" acts as a filter when no revs are given,
unlike "git log" which defaults to HEAD. It was reading from
its standard input.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This avoids fetching new revisions remotely, and is usefuly
versus plain "git rebase" because the user does not have to
specify which remote head to rebase against.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Format some lists really as lists. Improves both html and man
output.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-mergetool program can be used to automatically run an appropriate
merge resolution program to resolve merge conflicts. It will automatically
run one of kdiff3, tkdiff, meld, xxdiff, or emacs emerge programs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'master' of git://repo.or.cz/git/fastimport:
Remove unnecessary casts from fast-import
New fast-import test case for valid tree sorting
fast-import: grow tree storage more aggressively
POSIX says sed may add a trailing LF if there isn't already
one there. We shouldn't rely on it not adding that LF, as
some systems (Mac OS X for example) will add it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I started hacking on a change to add stdout redirection support to
the run_command family, but found I was using a lot of close calls
on two pipes in an array (such as for pipe). So I'm doing a tiny
bit of refactoring first to make the next set of changes clearer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jeff King pointed out that these casts are quite unnecessary, as
the compiler should be doing them anyway, and may cause problems
in the future if the size of the argument for to_atom were to ever
be increased.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Git tree sorting convention is more complex than just the name,
it needs to include the mode too to make sure trees sort as though
their name ends with "/".
This is a simple test case that verifies fast-import keeps the tree
ordering correct after editing the same tree twice in a single
input stream. A recent proposed patch series (that has not yet
been applied) will cause this test to fail, due to a bug in the
way the series handles sorting within the trees.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When building up a tree for a commit, fast-import
dynamically allocates memory for the tree entries. When more
space is needed, the allocated memory is increased by a
constant amount. For very large trees, this means
re-allocating and memcpy()ing the memory O(n) times.
To compound this problem, releasing the previous tree
resource does not free the memory; it is kept in a pool
for future trees. This means that each of the O(n)
allocations will consume increasing amounts of memory,
giving O(n^2) memory consumption.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since git-gui 0.6.4 the credits file is no longer produced.
This file was removed from git-gui due to build issues that
a lot of users and Git developers have reported running into.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Allow 'git gui version' outside of a repository
git-gui: Revert "git-gui: Display all authors of git-gui."
git-gui: Revert "Don't modify CREDITS-FILE if it hasn't changed."
git-gui: Allow committing empty merges
What the function wants to return is not if we saw any return
from pop_most_recent_commit(), but if we found what was asked
for.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I got a little surprise one day when I tried to run 'git gui version'
outside of a Git repository to determine what version of git-gui was
installed on that system. Turns out we were doing the repository
check long before we got around to command line argument handling.
We now look to see if the only argument we have been given is
'version' or '--version', and if so, print out the version and
exit immediately; long before we consider looking at the Git
version or working directory. This way users can still get to
the git-gui version number even if Git's version cannot be read.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This reverts commit 871f4c97ad.
Too many users have complained about the credits generator in
git-gui, so I'm backing the entire thing out. This revert will
finish that series.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This reverts commit 92446aba47.
Too many users have complained about the credits generator in
git-gui, so I'm backing the entire thing out.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt noticed that git-gui would not let the user commit
a merge created by `git merge -s ours` as the ours strategy does
not alter the tree (that is HEAD^1^{tree} = HEAD^{tree} after the
merge). The same issue arises from amending such a merge commit.
We now permit an empty commit (no changed files) if we are doing
a merge commit. Core Git does this with its command line based
git-commit tool, so it makes sense for the GUI to do the same.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A use case for git-bundle expected to be quite common is this:
$ git bundle create daily.bundle --since=10.days.ago --all
The expected outcome is _not_ to error out if only a couple of the
refs were not changed during the last 10 days.
This patch complains loudly about refs which are skipped due to the
pack not containing the corresponding objects, but dies only if
no objects would be in the pack _at all_.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Chain-reply-to is a personal perference, and is unlikely to change from
patchset to patchset. Similarly, bcc is likely to have the same values
every invocation is one likes to bcc oneself.
So, allow both to be set via configuration variables.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Wishing to implement an email aliases file, I found that they were already
implmented. Document them for the next user.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Warn the user that the "-m" option is ignored in the case of a fast
forward. That may save some confusion in the case where the user
doesn't know about fast forwards yet and may not realize that the
behavior here is intentional.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/boundary:
git-bundle: prevent overwriting existing bundles
git-bundle: die if a given ref is not included in bundle
git-bundle: handle thin packs in subcommand "unbundle"
git-bundle: Make thin packs
git-bundle: avoid packing objects which are in the prerequisites
bundle: fix wrong check of read_header()'s return value & add tests
revision --boundary: fix uncounted case.
revision --boundary: fix stupid typo
git-bundle: make verify a bit more chatty.
revision traversal: SHOWN means shown
git-bundle: various fixups
revision traversal: retire BOUNDARY_SHOW
revision walker: Fix --boundary when limited
Sergey Vlasov, Andy Parkins and Alex Riesen all pointed out that it
is possible for a single invocation of receive-pack to be given more
refs than the OS might allow us to pass as command line parameters
to a single hook invocation.
We don't want to break these up into multiple invocations (like
xargs might do) as that makes it impossible for the pre-receive
hook to verify multiple related ref updates occur at the same time,
and it makes it harder for post-receive to send out a single batch
notification.
Instead we pass the reference data on a pipe connected to the
hook's stdin, supplying one ref per line to the hook. This way a
single hook invocation can obtain an infinite amount of ref data,
without bumping into any operating system limits.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since we have decided to change the calling conventions for the
pre-receive and post-receive hooks to take the ref data on stdin
rather than on the command line we cannot use the same logic to
invoke the update hook anymore.
So we take a small step backwards towards what we used to have,
and create a specialized function for executing just the update
hook.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm pulling the error handling used to decode the result of
run_command up into a new function so that I can reuse it.
No changes, just a simple code movement.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometimes callers trying to use run_command to execute a child
process will want to setup a pipe or file descriptor to redirect
into the child's stdin.
This idea is completely stolen from builtin-bundle's fork_with_pipe,
written by Johannes Schindelin. All credit (and blame) should lie
with Dscho. ;-)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the calling process wants to send data to stdin of a
child process it will need to arrange for a pipe and get
the child process running, feed data to it, then wait
for the child process to finish. So we split the run
function into two halves, allowing callers to first
start the child then later finish it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There are a number of places where we do some variation of
fork()+exec() but we also need to setup redirection in the process,
much like what run_command does for us already with its option flags.
It would be nice to reuse more of the run_command logic, especially
as that non-fork API helps us to port to odd platforms like Win32.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We don't actually use these va_list based variants of run_command
anymore. I'm removing them before I make further improvements.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Another change by me is removing the va_list variants of run_command,
one of which is used by builtin-revert.c. To avoid compile errors
I'm refactoring builtin-revert to use the char** variant instead,
as that variant is staying.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using Update-existing leads to the client forgetting about the "locally
modified" status of the file which can lead to loss of local changes on
later updates.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Acked-by: Martin Langhoff <martin.langhoff@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
a try, but all I could get was a segfault. It was dereferencing a NULL
commit list. Fix below. With it, this example now works:
$ mkdir .j; cd .j; touch f
$ git-init; git-add f; git-commit -mc f; echo x >f; git-commit -md f
$ git-diff -p :/c :/d
diff --git a/f b/f
index e69de29..587be6b 100644
--- a/f
+++ b/f
@@ -0,0 +1 @@
+x
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In order to track and build on top of a branch 'topic' you track from
your upstream repository, you often would end up doing this sequence:
git checkout -b mytopic origin/topic
git config --add branch.mytopic.remote origin
git config --add branch.mytopic.merge refs/heads/topic
This would first fork your own 'mytopic' branch from the 'topic'
branch you track from the 'origin' repository; then it would set up two
configuration variables so that 'git pull' without parameters does the
right thing while you are on your own 'mytopic' branch.
This commit adds a --track option to git-branch, so that "git
branch --track mytopic origin/topic" performs the latter two actions
when creating your 'mytopic' branch.
If the configuration variable branch.autosetupmerge is set to true, you
do not have to pass the --track option explicitly; further patches in
this series allow setting the variable with a "git remote add" option.
The configuration variable is off by default, and there is a --no-track
option to countermand it even if the variable is set.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/diff-ni:
Get rid of the dependency to GNU diff in the tests
diff --no-index: support /dev/null as filename
diff-ni: fix the diff with standard input
diff: support reading a file from stdin via "-"
