I will be using functions from Git.pm in more modules, so I
want to avoid re-importing the long argument list everywhere
it's used.
Also removed an unused command-line switch
(--no-ignore-externals) and some variables.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Force some svn_ra functions to use a temporary pool via wrapper
This cleans up the code a bit by removing explicit instances of
pool allocation and deallocation and providing wrapper functions
that make use of temporary pools.
I've also added an explicit pool usage when creating the commit
editor for commit-diff where get_commit_editor can be called
multiple times with the same pool previously.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* lt/crlf:
Teach core.autocrlf to 'git apply'
t0020: add test for auto-crlf
Make AutoCRLF ternary variable.
Lazy man's auto-CRLF
* jc/apply-config:
t4119: test autocomputing -p<n> for traditional diff input.
git-apply: guess correct -p<n> value for non-git patches.
git-apply: notice "diff --git" patch again
Fix botched "leak fix"
t4119: add test for traditional patch and different p_value
apply: fix memory leak in prefix_one()
git-apply: require -p<n> when working in a subdirectory.
git-apply: do not lose cwd when run from a subdirectory.
Teach 'git apply' to look at $HOME/.gitconfig even outside of a repository
Teach 'git apply' to look at $GIT_DIR/config
* maint:
git-diff: fix combined diff
Fix 'git commit -a' in a newly initialized repository
Include git-gui credits file in dist.
Document the new core.bare configuration option.
The code forgets that typecast binds tighter than addition, in
other words:
(cast *)array + i === ((cast *)array) + i
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With current git:
$ git init
$ git commit -a
cp: cannot stat `.git/index': No such file or directory
Output a nice error message instead.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The Makefile for the git-gui subproject will fail to execute if run
outside of a git.git directory, such as when building from a .tar.gz
or .tar.bz2. This is because it is looking for the credits file,
which was created but omitted from the tarball by the toplevel
Makefile.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This enhances the third point in the previous commit. When
applying a non-git patch that begins like this:
--- 2.6.orig/mm/slab.c
+++ 2.6/mm/slab.c
@@ -N,M +L,K @@@
...
and if you are in 'mm' subdirectory, we notice that -p2 is the
right option to use to apply the patch in file slab.c in the
current directory (i.e. mm/slab.c)
The guess function also knows about this pattern, where you
would need to use -p0 if applying from the top-level:
--- mm/slab.c
+++ mm/slab.c
@@ -N,M +L,K @@@
...
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier one that tried to be too consistent with GNU patch by
not stripping the leading path when we _know_ we are in a
subdirectory and the patch is relative to the toplevel was a
mistake. This fixes it.
- No change to behaviour when it is run from the toplevel of
the repository.
- When run from a subdirectory to apply a git-generated patch,
it uses the right -p<n> value automatically, with or without
--index nor --cached option.
- When run from a subdirectory to apply a randomly generated
patch, it wants the right -p<n> value to be given by the
user.
The second one is a pure improvement to correct inconsistency
between --index and non --index case, compared with 1.5.0. The
third point could be further improved to guess what the right
value for -p<n> should be by looking at the patch, but should be
a topic of a separate patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Use gunzip -c over gzcat in import-tars example.
git-gui: Don't crash in citool mode on initial commit.
git-gui: Remove TODO list.
git-gui: Include browser in our usage message.
git-gui: Change summary of git-gui.
git-gui: Display all authors of git-gui.
git-gui: Use mixed path for docs on Cygwin.
git-gui: Correct crash when saving options in blame mode.
git-gui: Expose the browser as a subcommand.
git-gui: Create new branches from a tag.
git-gui: Prefer version file over git-describe.
git-gui: Print version on the console.
git-gui: More consistently display the application name.
git-gui: Permit merging tags into the current branch.
git-gui: Basic version check to ensure git 1.5.0 or later is used.
git-gui: Refactor 'exec git subcmd' idiom.
* 'master' of git://repo.or.cz/git-gui:
git-gui: Don't crash in citool mode on initial commit.
git-gui: Remove TODO list.
git-gui: Include browser in our usage message.
git-gui: Change summary of git-gui.
git-gui: Display all authors of git-gui.
git-gui: Use mixed path for docs on Cygwin.
git-gui: Correct crash when saving options in blame mode.
git-gui: Expose the browser as a subcommand.
git-gui: Create new branches from a tag.
git-gui: Prefer version file over git-describe.
git-gui: Print version on the console.
git-gui: More consistently display the application name.
git-gui: Permit merging tags into the current branch.
git-gui: Basic version check to ensure git 1.5.0 or later is used.
git-gui: Refactor 'exec git subcmd' idiom.
Not everyone has gzcat or bzcat installed on their system, but
gunzip -c and bunzip2 -c perform the same task and are available
if the user has installed gzip support or bzip2 support.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When (new_name == old_name), the previous one prefixed old_name
alone, leaving new_name untouched, and worse yet, left it
dangling pointing at an already freed memory location.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: the original from Pavel was limiting the variable names to only
fetch and url, but I loosened it to take valid variable names.]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Matthias Lederhofer noticed that `diff -B` did not pick up on diff
colournig.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In response to a feature request from Shawn Pearce, this patch allows
a user to update a named group of remotes by using "git remote update
<group>", where the group is defined in the config file by
remotes.<group>. The default if the named group is not specified is
now fetched group remotes.default, instead of remote.fetch, which is
what had been previously used.
In addition, if remotes.default is not defined, all remotes defined in
the config file will be used, as before, but there is now also
possible to request that a particular repository to be skipped by
default by using the boolean configuration parameter
remote.<name>.skipDefaultUpdate.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is necessary if using CVS in an asymmetric fashion, i.e. when the
CVSROOT you are checking out from differs from the CVSROOT you have to
commit to.
Signed-off-by: Simon 'corecode' Schubert <corecode@fs.ei.tum.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Glibc uses the same size for int and off_t by default.
In order to support large pack sizes (>2GB) we force Glibc to a 64bit off_t.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Attempting to use `git citool` to create an initial commit caused
git-gui to crash with a Tcl error as it tried to add the newly
born branch to the non-existant branch menu. Moving this code
to after the normal commit cleanup logic resolves the issue, as
we only have a branch menu if we are not in singlecommit mode.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm apparently not very good at keeping my own TODO file current.
I its also somewhat strange to keep the TODO list as part of the
software branch, as its meta-information that is not directly
related to the code. I'm pulling the TODO list from git-gui and
moving it into a seperate branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that the 'browser' subcommand can be used to startup the tree
browser, it should be listed as a possible subcommand option in
our usage message.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There were instances of strncmp() that were formatted improperly
(e.g. whitespace around parameter before closing parenthesis)
that caused the earlier mechanical conversion step to miss
them. This step cleans them up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Previous step converted use of strncmp() with literal string
mechanically even when the result is only used as a boolean:
if (!strncmp("foo", arg, 3)) ==> if (!(-prefixcmp(arg, "foo")))
This step manually cleans them up to read:
if (!prefixcmp(arg, "foo"))
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since git-gui does more than create commits, it is unfair to call
it "a commit creation tool". Instead lets just call it a graphical
user interface.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that git-gui has been released to the public as part of Git 1.5.0
I am starting to see some work from other people beyond myself and
Paul. Consequently the copyright for git-gui is not strictly the
two of us anymore, and these others deserve to have some credit
given to them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Firefox browser requires that a URL use / to delimit directories.
This is instead of \, as \ gets escaped by the browser into its hex
escape code and then relative URLs are incorrectly resolved, Firefox
no longer sees the directories for what they are. Since we are
handing the browser a true URL, we better use the standard / for
directories.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Thanks to Simon 'corecode' Schubert <corecode@fs.ei.tum.de> for
the clean-up. Defining the C99 standard PRIuMAX when necessary
replaces UM_FMT and the awkward UM10_FMT. There are no direct
C99 translations for other uses of NO_C99_FORMAT in git, alas.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When naming by a tag, we used to add "^0" even if this was not really
necessary. For example, `git name-rev de6f0def` now outputs
de6f0def tags/v1.5.0.1~9
instead of
de6f0def tags/v1.5.0.1^0~9
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-apply running inside a subdirectory, with or without --index,
used to always assume that the patch is formatted in such a way
to apply with -p1 from the toplevel, but it is more useful and
consistent with the use of "GNU patch -p1" if it defaulted to
assume that its input is meant to apply at the level it is
invoked in.
This changes the behaviour. It used to be that the patch
generated this way would apply without any trick:
edit Documentation/Makefile
git diff >patch.file
cd Documentation
git apply ../patch.file
You need to give an explicit -p2 to git-apply now. On the other
hand, if you got a patch from somebody else who did not follow
"patch is to apply from the top with -p1" convention, the input
patch would start with:
diff -u Makefile.old Makefile
--- Makefile.old
+++ Makefile
and in such a case, you can apply it with:
git apply -p0 patch.file
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a patch modifies (not deletes) the last file in a
directory, because we treat a modification just as deletion
followed by creation, and deleting the last file in a directory
automatically rmdir(2)'s that directory, we ended up removing
the directory, which can potentially be the cwd, and then
recreating the same directory to create the patch result.
Avoid the rmdir step when remove_file() is called only because
we are replacing it with the result by later calling
create_file().
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows users to use the command "git remote update" to update all
remotes that are being tracked in the repository.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
