* jc/index-output:
git-read-tree --index-output=<file>
_GIT_INDEX_OUTPUT: allow plumbing to output to an alternative index file.
Conflicts:
builtin-apply.c
* cc/bisect:
git-bisect: allow bisecting with only one bad commit.
t6030: add a bit more tests to git-bisect
git-bisect: modernization
Documentation: bisect: "start" accepts one bad and many good commits
Bisect: teach "bisect start" to optionally use one bad and many good revs.
* maint:
Documentation: tighten dependency for git.{html,txt}
Makefile: iconv() on Darwin has the old interface
t5300-pack-object.sh: portability issue using /usr/bin/stat
t3200-branch.sh: small language nit
usermanual.txt: some capitalization nits
Make builtin-branch.c handle the git config file
rename_ref(): only print a warning when config-file update fails
Distinguish branches by more than case in tests.
Avoid composing too long "References" header.
cvsimport: Improve formating consistency
cvsimport: Reorder options in documentation for better understanding
cvsimport: Improve usage error reporting
cvsimport: Improve documentation of CVSROOT and CVS module determination
cvsimport: sync usage lines with existing options
Conflicts:
Documentation/Makefile
Every time _any_ documentation page changed, cmds-*.txt files
were regenerated, which caused git.{html,txt} to be remade. Try
not to update cmds-*.txt files if their new contents match the
old ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The libiconv on Darwin uses the old iconv() interface (2nd argument is a
const char **, instead of a char **). Add OLD_ICONV to the Darwin
variable definitions to handle this.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the test 'compare delta flavors', /usr/bin/stat is used to get file size.
This isn't portable. There already is a dependency on Perl, use its '-s'
operator to get the file size.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows you to say:
git bisect start
git bisect bad $bad
git bisect next
to start bisection without knowing a good commit. This would
have you try a commit that is half-way since the beginning of
the history, which is rather wasteful if you already know a good
commit, but if you don't (or your history is short enough that
you do not care), there is no reason not to allow this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the knowledge about .git/config usage out of refs.c and into
builtin-branch.c instead, which allows git-branch to update HEAD to point
at the moved branch before attempting to update the config file. It also
allows git-branch to exit with an error code if updating the config file
should fail.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If git_config_rename_section() fails, rename_ref() used to return 1, which
left HEAD pointing to an absent refs/heads file (since the actual renaming
had already occurred).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The renaming without config test changed a branch from q to Q, which
fails on non-case sensitive file systems. Change the test to use q
and q2.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The number of characters in a line MUST be no more than 998 characters,
and SHOULD be no more than 78 characters (RFC2822).
It is much safer to fold the header by ourselves.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use ' ' syntax for all commandline options mentioned in text.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The current order the options are documented in makes no sense
at all to me. Reorder them so that similar options are grouped
together and also order them somehwhat by importance.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Actually tell the user what he did wrong in case of usage errors
instead of only printing the general usage information.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document the fact that git-cvsimport tries to find out CVSROOT from
CVS/Root and $ENV{CVSROOT} and CVS_module from CVS/Repository.
Also use ` ` syntax for all filenames for consistency.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sync both the usage lines in the code and the asciidoc
documentation with the real list of options. While
all options seems to be documented in the asciidoc
document, not all of them were listed in the usage line.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This slightly modernizes the bisect script to use show-ref/for-each-ref
instead of looking into $GIT_DIR/refs files directly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Fix lseek(2) calls with args 2 and 3 swapped
Honor -p<n> when applying git diffs
Fix dependency of common-cmds.h
Fix renaming branch without config file
DESTDIR support for git/contrib/emacs
gitweb: Fix bug in "blobdiff" view for split (e.g. file to symlink) patches
Document --left-right option to rev-list.
Revert "builtin-archive: use RUN_SETUP"
rename contrib/hooks/post-receieve-email to contrib/hooks/post-receive-email.
rerere: make sorting really stable.
Fix t4200-rerere for white-space from "wc -l"
One bad commit is fundamentally needed for bisect to run,
and if we beforehand know more good commits, we can narrow
the bisect space down without doing the whole tree checkout
every time we give good commits.
This patch implements:
git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
as a short-hand for this command sequence:
git bisect start
git bisect bad $bad
git bisect good $good1 $good2...
On the other hand, there may be some confusion between revs
(<bad> and <good>...) and <pathspec>... if -- is not used
and if an invalid rev or a pathspec that looks like a rev is
given.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
GNU make does not include environment variables by default
in its namespace. Just pass them in make command line.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This function was not called "add_file_to_cache()" only because
an ancient program, update-cache, used that name as an internal
function name that does something slightly different. Now that
is gone, we can take over the better name.
The plan is to name all functions that operate on the default
index xxx_cache(). Later patches create a variant of them that
take an explicit parameter xxx_index(), and then turn
xxx_cache() functions into macros that use "the_index".
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is an internal variable used to tell if we need to write
out the resulting index.
I'll be introducing write_index() function which would collide
with it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'd like to consistently name all index-layer functions that
operate on the default index xxx_cache(), and this application
specific function interferes with the plan.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The function refresh_cache() is the only user of cache_errno
that switches its behaviour based on what internal function
refresh_cache_entry() finds; pass the error status back in a
parameter passed down to it, to get rid of the global variable
cache_errno.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This error message should not usually trigger, but the function
make_cache_entry() called by add_cacheinfo() can return early
without calling into refresh_cache_entry() that sets cache_errno.
Also the error message had a wrong function name reported, and
it did not say anything about which path failed either.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Previously, a binary file in the diffstat would show as:
some-binary-file.bin | Bin
The space after the "Bin" was never used. This patch changes binary
lines in the diffstat to be:
some-binary-file.bin | Bin 12345 -> 123456 bytes
The very nice "->" notation was suggested by Johannes Schindelin, and
shows the before and after sizes more clearly than "+" and "-" would.
If a size is 0 it's not shown (although it would probably be better to
treat no-file differently from zero-byte-file).
The user can see what changed in the binary file, and how big the new
file is. This is in keeping with the information in the rest of the
diffstat.
The diffstat_t members "added" and "deleted" were unused when the file
was binary, so this patch loads them with the file sizes in
builtin_diffstat(). These figures are then read in show_stats() when
the file is marked binary.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user is trying to apply a Git generated diff file and they
have specified a -p<n> option, where <n> is not 1, the user probably
has a good reason for doing this. Such as they are me, trying to
apply a patch generated in git.git for the git-gui subdirectory to
the git-gui.git repository, where there is no git-gui subdirectory
present.
Users shouldn't supply -p2 unless they mean it. But if they are
supplying it, they probably have thought about how to make this
patch apply to their working directory, and want to risk whatever
results may come from that.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Prior to 1.5.0 the git-lost-found utility was useful to locate
commits that were not referenced by any ref. These were often
amends, or resets, or tips of branches that had been deleted.
Being able to locate a 'lost' commit and recover it by creating a
new branch was a useful feature in those days.
Unfortunately 1.5.0 added the reflogs to the reachability analysis
performed by git-fsck, which means that most commits users would
consider to be lost are still reachable through a reflog. So most
(or all!) commits are reachable, and nothing gets output from
git-lost-found.
Now git-fsck can be told to ignore reflogs during its reachability
analysis, making git-lost-found useful again to locate commits
that are no longer referenced by a ref itself, but may still be
referenced by a reflog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Let's avoid the open coded pack index reference in pack-object and use
nth_packed_object_sha1() instead. This will help encapsulating index
format differences in one place.
And while at it there is no reason to copy SHA1's over and over while a
direct pointer to it in the index will do just fine.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git_config_rename_section return success if no config file
exists. Otherwise, renaming a branch would abort, leaving the
repository in an inconsistent state.
[jc: test]
Signed-off-by: Geert Bosch <bosch@gnat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git_patchset_body needs patch generated with --full-index option to
detect split patches, meaning two patches which corresponds to single
difftree (raw diff) entry. An example of such situation is changing
type (mode) of a file, e.g. from plain file to symbolic link.
Add, in git_blobdiff, --full-index option to patch generating git diff
invocation, for the 'html' format output ("blobdiff" view).
"blobdiff_plain" still uses shortened sha1 in the extended git diff
header "index <hash>..<hash>[ <mode>]" line.
Noticed-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit 64edf4b2 cleaned up the initialization of git-archive,
at the cost of 'git-archive --list' now requiring a git repo.
This patch reverts the cleanup and documents the requirement
for this particular dirtyness in a test.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier code does not swap hunks when the beginning of the
first side is identical to the whole of the second side. In
such a case, the first one should sort later.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On OS X, wc outputs 6 spaces before the number of lines, so the test
expecting the string "10" failed. Do not quote $cmd to strip away
the problematic whitespace as other tests do.
Also fix the grammar of the test name while making changes to it.
There's only one preimage, so it's "has", not "have".
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git svn log" is the only command that needs the pass-through
option in Getopt::Long; otherwise we will bail out and let the
user know something is wrong.
Also, avoid printing out unaccepted mixed-case options (that
are reserved for the command-line) such as --useSvmProps
in the usage() function.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Ensure that in all references to an element of a hash, the
key is singlequoted, instead of using bareword: use $hash{'key'}
instead of $hash{key}
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Code should be look the same way, regardless of tab size.
Use tabs for indent, but spaces for align.
Indent continued part of command spanning multiple lines, but only once.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
